Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Availability:
Not available
-
Categories:
3D Scanner
-
Categories:
Filamets
-
Categories:
Resin
PHROZEN
Phrozen Aqua 8K 3D Printing Resin
- Phrozen Aqua 8K 3D Printing Resin
- Specifically formulated to showcase super-fine detail
- Easy to print and are easily post-processed
- Low Shrinkage & High Precision
- Low Viscosity & Low Odor
eSUN
eSun eTPU-HS
- eSun eTPU-HS Filament
- Flexible and soft
- High elasticity
- High toughness
- Nozzle Temp 220~250°C
- Bed Temp 45~60°C
- Durability 90%
- Printing Speed 50 – 200mm/s
- Build Surface : Masking paper, PVP solid glue, PEI
3DMakerpro
3DMakerpro Lynx
- 3DMakerpro Lynx 3D Scanner
- UP To 0.10MM Accuracy
- Wide Scanning Range
- Ideal for 100-2000MM Objects
- Light Source NIR
- Work distance 400-900mm
- Single capture range 250x400mm
- Frame rate 10fps
- Resolution 0.30mm
PHROZEN
Phrozen Aqua 4K 3D Printing Resin
- Phrozen Aqua 4K 3D Printing Resin
- Developed for low shrinkage and high precision
- Easy to print and are easily post-processed
- Formulated to print with the highest resolution
eSUN
eSUN ePLA-HS
- eSun ePLA-HS Filament
- Suitable for high-speed printing
- Smooth flow without blocking
- Quick Cooling and forming
- Density 1.24 g/cm3
- Extruder Temp 210-230
- Bed Temp 45-60
- Printing Speed 350mm/s
3DMakerpro
3DMakerpro Magic Swift Plus
- 3DMakerpro Lynx 3D Scanner
- UP To 0.10MM Accuracy
- Wide Scanning Range
- Ideal for 100-2000MM Objects
- Light Source NIR
- Work distance 250-650mm
- Single capture range 400×250mm
- Frame rate 10fps
- Resolution 0.25mm
PHROZEN
Phrozen Aqua 3D Printing Resin
- Phrozen Aqua 3D Printing Resin
- Good printing performance
- Print even thin objects with ease
- Moderate viscosity and low odor
- Density: 1.05 - 1.25 g/cm3
- Viscosity: 250 - 400 cP
- Surface Hardness: 70 Shore D
- Tensile Strength at Break: 17.6 MPa
eSUN
eSUN ABS+
- eSUN ABS+ Filament
- Density 1.06g/cm³
- Heat Distortion 73
- Tensil Strength 40%
- Extruder Temp 230~270
- Bed Temp 95~110
PHROZEN
Phrozen EL400 Elastomer 3D Printing Resin
- Phrozen EL400 Elastomer 3D Printing Resin
- Printing flexible and durable models
- Compatible With all Kind of Resin 3D Printers
- High Precision Printing
- Easy post Productions
- Fast Printing Speed
eSUN
eSun ePLA-Matte
- eSun ePLA-Matte Filament
- Matte surface effect
- High-speed printing
- Easy to peel off the support
- Excellent printability
- Prop Bed Temp 45~60
- Prop Extruder Temp 190~230
- Density 1.329 g/cm³
- Elongation at break 50%
3DMakerpro
3DMakerpro Seal Lite
- 3DMakerpro Seal 3D Scanner
- UP To 0.02mm Accuracy
- Wide Scanning Range
- Ideal for 10-300mm Objects
- Light Source Blue light
- Work distance 180-280mm
- Single capture range 100x75mm
- Frame rate 10fps
- Resolution 0.07mm
ANYCUBIC
Anycubic PETG Filament
- Anycubic PETG Filament
- Strong and Durable
- Clear and Vibrant
- Prop Bed Temp 75~90℃
- Prop Nozzle Temp 230~250℃
SHINING 3D
Shining 3D FreeScan UE Pro
- Shining 3D FreeScan UE Pro 3D Scanner
- 26 laser lines for marker-free scanning
- Scan Speed up to 1,850,000 points/s
- Accuracy up to 0.02 mm with markers
- Multi Scanning Modes and Integrated Photogrammetry
- Scan Depth 170 ~ 680 mm
- FOV : 600x550 mm
- Volumetric Accuracy 0.02+0.03 mm/m
PHROZEN
Phrozen Speed Plus 3D Printing Resin
- Phrozen Speed Plus 3D Printing Resin
- Faster 3D Printing
- Short exposure time
- Suitable for large-format models
- Compatible with ACF & PFA Release Films
- High Details and accuracy
- Hardness 85–88D
- Tensile modulus 2414 MPa
- Viscosity 150–250 cP at 25 °C
- longation at break 5.7%
eSUN
eSun ePLA-Metal
- eSun ePLA-Metal Filament
- Metallic glossy texture
- Excellent printability
- Smooth surface
- Prop Nozzle Temp 190 – 230℃
- Prop Bed Temp 45 – 60°C
- Density 1.255 g/cm3
- Heat Distortion Temp 53℃
- Tensile Strength 63.16 MPa
PHROZEN
Phrozen Speed 3D Printing Resin
- Phrozen Speed 3D Printing Resin
- Up to 8x faster 3D Printing
- Print Huge Models Within 6 Hours
- Compatible With Various LCD 3D Printers
eSUN
eSun ePLA-Silk Mystic
- eSun ePLA-Silk Mystic
- Mystery Three-color
- Silk glossy texture
- Excellent printability
- Prop Extruder Temp 190 – 230℃
- Prop Bed Temp 45 – 60°C
- Tensile Strength 57.64 MPa
- Density 1.256 g/cm3
- Flexural Strength Mpa
ELEGOO
ELEGOO PLA Filament
- ELEGOO PLA Filament
- Density 1.20g/cm³
- Charpy impact 5.4kj/m²
- Termal Deformation Temp 53°C
- Prop Extruder Temp 190~220°C
- Prop Bed Temp 50-65°C
- Priting Speed 30-70mm/s
- Elongation at Break 11.2%
- Tensile Strength 50MPa
BlueCast
BLUECAST X-ONE V2
- 0% shrinkage, perfect dimensional accuracy
- No UV post-curing required after printing
- Ultra-fast burnout: 2 hours at 700°C
- Compatible with DLP & LCD 3D printers
- Smooth surfaces and sharp engravings
- Ideal for solid rings and dense models
- Safe, odorless, low VOC resin
- Easy cleanup with ethyl alcohol
- Excellent casting with any investment
ELEGOO
ELEGOO PLA Special Colored
- ELEGOO PLA Special Colored
- Density 1.20g/cm³
- Charpy impact 5.4kj/m²
- Termal Deformation Temp 53°C
- Prop Extruder Temp 190~220°C
- Prop Bed Temp 50-65°C
- Priting Speed 30-70mm/s
- Elongation at Break 11.2%
- Tensile Strength 50MPa
BlueCast
BlueCast X-WAX Filigree Resin
- Designed for filigree and Arabic jewelry
- Extreme printability with sharp details
- Smooth surface, minimal polishing needed
- High wax content for clean casting
- Supports LCD and DLP 3D printers
- Superior strength for thin-walled parts
- Easy support removal, no surface damage
- Fast printing vs traditional wax printers
- UV post-curing enhances model durability
- Works with standard burnout cycles
ELEGOO
ELEGOO Silk PLA
- ELEGOO ELEGOO Silk PLA
- Density 1.20g/cm³
- Charpy impact 5.4kj/m²
- Termal Deformation Temp 53°C
- Prop Extruder Temp 190~220°C
- Prop Bed Temp 50-65°C
- Priting Speed 30-70mm/s
- Elongation at Break 11.2%
- Tensile Strength 50MPa
BlueCast
BLUECAST X-WAX Resin
- Contains 80% real wax for clean burnout
- No UV post-curing needed after print
- Extreme castability for metal jewelry
- Perfect for solid rings and thick parts
- Prints on LCD and DLP printers
- Fast printing up to 5× wax printers
- Leaves zero ash after burnout
- Works with low-cost 3D printers
- Supports standard burnout cycles
- Environmentally friendly formulation
ANYCUBIC
Anycubic PLA Pantone
- Anycubic PLA Pantone
- Co-Created with Pantone Color Institute
- Density 1.23g/cm³
- Tensile Strength 60MPa
- Eco-friendly
- +0.02mm precision
- Prop Extruder Temp 200~210°C
- Prop Bed Temp 50-60°C
Revopoint
Revopoint MIRACO
- Revopoint MIRACO 3D Scanner
- 6” 2k AMOLED Touch Screen
- 0.05 mm accuracy
- Up to 0.02 mm precision
- 48 Megapixel RGB Camera
- Up to 2 hours of Scanning
- Single Capture 28x53mm at 100 mm
- Minimum Scan Volume 10x10x10mm
- Working Distance 100 ~ 1000 mm
- Internal Storage 256 GB eMMC
- Maxmium Scan Volume 4000x4000x4000mm
- Light Source Class 1 Infrared Light
- CPU 8-core CPU，2.4 GHz
BAMBU LAB
Bambu Lab PLA CMYK Lithophane Bundle
- Bambu Lab PLA CMYK Lithophane Bundle
- MakeMake Colorful 3D Models
- Include Jade White,Basic Yellow,Basic Magenta,Basic Cyan
- Recommended Printing Temperature: 210 - 230 °C
- Recommended Bed Temperature: 45 - 60°C
- Compatible With All kind of 3D Printer
- Density 1.24 g/cm3
BAMBU LAB
Bambu Lab PLA Metal
- Bambu Lab PLA Metal
- Metal Surface Texture & Metallic Shine
- High impact strength
- Recommended Printing Temperature: 210 - 230 °C
- Recommended Bed Temperature: 45 - 60°C
- Compatible With All kind of 3D Printer
- Density 1.24 g/cm3
Revopoint
Revopoint MINI 2 Standard Edition
- Revopoint MINI 2 Standard Edition
- Accuracy Up to 0.05 mm
- Precision Up to 0.02 mm
- Scanning Speed 16fps
- Capture Area at Furthest Distance 168 x 132 mm at 250 mm
- Working Distance 120 - 250 mm
- Point Distance Up to 0.02 mm
- Minimum Scan Volume 10x10x10mm
- Position Sensors 9-axis IMU
- Light Source Class 1 Blue Light
- Tracking Methods: Feature/Marker
- Wi-Fi 6 and USB Type-C ConnectIvity
BAMBU LAB
Bambu Lab PLA Matte
- Bambu Lab PLA Matte
- Matte Surface Texture
- Recommended Printing Temperature: 210 - 230 °C
- Recommended Bed Temperature: 45 - 60°C
- Compatible With All kind of 3D Printer
- Density 1.24 g/cm3
Revopoint
Revopoint MINI 2 Advanced Edition
- Revopoint MINI 2 Advanced Edition
- Accuracy Up to 0.05 mm
- Precision Up to 0.02 mm
- With Dual-axis Turntable
- Scanning Speed 16fps
- Capture Area at Furthest Distance 168 x 132 mm at 250 mm
- Working Distance 120 - 250 mm
- Point Distance Up to 0.02 mm
- Minimum Scan Volume 10x10x10mm
- Position Sensors 9-axis IMU
- Light Source Class 1 Blue Light
- Tracking Methods: Feature/Marker
- Wi-Fi 6 and USB Type-C ConnectIvity
Polymaker
Polymaker PolyTerra PLA
- Polymaker PolyTerra PLA
- Eco-Friendly
- A World of Color & Effects
- Printing Speed 30mm/s - 70mm/s
- Prop Bed Temperature: 25˚C - 60˚C
- Printing Temperature: 190˚C - 230˚C
- Jam-Free Technology
Revopoint
Revopoint POP 3 Premium Edition
- Revopoint POP 3 Premium Edition 3D Scanner
- With Handheld Stabilizer
- Accuracy 0.1mm
- 18 fps Smooth Scanning
- Point Distance 0.05mm
- Support Color Scans
- Enhanced Tracking With 4 Infrared LEDs
- Smart Stabilization
- FOV 40x25°
- Maxmium Scan Volume 2500x2500x2500mm
- Light Source : Infrared Fill Lights, White Flash LEDs
- Single Capture 244x180mm at 400mm
- Scanning Environment Indoors and Outdoors
- Output Formats PLY, OBJ, and STL
Polymaker
Polymaker PolySonic PLA Pro
- Polymaker PolySonic PLA Pro
- High-speed Printing up to 300 mm/s
- Impact resistance like ABS
- Prop Extruder Tempo 210 - 230 °C
- Prop Bed Temp 25 - 60 °C
Revopoint
Revopoint POP 3 Advanced Edition
- Revopoint POP 3 Advanced Edition 3D Scanner
- With Dual-Axis Turntable
- Accuracy 0.1mm
- 18 fps Smooth Scanning
- Point Distance 0.05mm
- Support Color Scans
- Enhanced Tracking With 4 Infrared LEDs
- Smart Stabilization
- FOV 40x25°
- Maxmium Scan Volume 2500x2500x2500mm
- Light Source : Infrared Fill Lights, White Flash LEDs
- Single Capture 244x180mm at 400mm
- Scanning Environment Indoors and Outdoors
- Output Formats PLY, OBJ, and STL
English
العربية
