Left Banner
-
Free PLA Filament
For First Orders
ELEGOO
ELEGOO Centauri Carbon 2
- 4-Color Printing Module for multi-color models
- RFID auto filament detection and syncing
- Upgraded chamber camera with Wi-Fi monitoring
- CoreXY motion system with 500 mm/s speed
- 20,000 mm/s² high-acceleration printing
- 256×256×256 mm build volume capacity
- Hardened brass-steel nozzle for CF materials
- 320°C nozzle for engineering filaments
- 110°C heated bed for strong first layers
- Supports CF, GF, ABS, PC, PA, ASA, PETG
- Triple Z-screws with linear guide rods
- 121-point auto leveling precision
- Dual-sided PEI flexible build plate
- Silent Drive motors for low noise
- Full-Auto Calibration for easy setup
CREALITY
Creality K2 Plus Combo
- Creality K2 Plus Combo 3D Printer
- Multi Filament 3D Printing With CFS
- Apus Direct Drive Extruder
- Build Volume 350x350x350mm
- Printing Speed Up to 600mm/s
- Max Nozzle Temp 350°C
- Max Bed Temp 120°C
- Ai Pritning Control System
- Fully Automatic Leveling
- Actively heated chamber
- Conectivity RJ45 ethernet, Wifi
CREALITY
Creality K2 PRO Combo 3D Printer
- 300×300×300 mm large build volume
- CFS for up to 4-color multi-material printing
- Active air chamber heating system
- Expandable to 16 colors with 4 CFS units
- Equipped with a heated print chamber
- 32GB EMMC File Storage
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy controla
CREALITY
Creality K2 Combo 3D Printer
- 260×260×260 mm large build volume
- CFS for up to 4-color multi-material printing
- Expandable to 16 colors with 4 CFS units
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
CREALITY
Creality K2 Standard 3D Printer
- 260×260×260 mm large build volume
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
CREALITY
Creality K2 PRO Standard 3D Printer
- 300×300×300 mm large build volume
- Equipped with a heated print chamber
- 32GB EMMC File Storage
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
FLASHFORGE
Flashforge AD5X Color 3D Printer
- True 4-color intelligent printing
- Max speed up to 600 mm/s
- Acceleration up to 20000 mm/s²
- Auto filament switching system
- 99% power-loss recovery
- Quick-release nozzle design
- Nozzle options: 0.25–0.8 mm
- Core XY stable motion system
- Multi-material compatibility
- 4.3-inch full touch display
- Build volume 220×220×220 mm
- Max bed temp up to 110°C
- WIFI, Ethernet, USB connectivity
- Supports Prusa/Cura/Orca slicers
- Compact 363×363×413 mm body
CREALITY
Creality Hi Combo
- Creality Hi Combo 3D Printer
- Support Multicolor 3D Printing
- Build Volume 260×260×300mm
- Printing Speed up to 500mm/s
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
- Full-auto leveling
- 3.2" color touch screen
- Built-in Sensor to Read Filament Info
- All-metal Body
- Monitoring Camera with a Privacy Cap
CREALITY
CREALITY SPARKX i7 COMBO
- CREALITY SPARKX i7 COMBO
- Build Volume: 260×260×255 mm
- Max Speed: ≤500 mm/s
- Acceleration: ≤10000 mm/s²
- Extruder: Direct Drive
- Nozzle System: Quick-Swap Hotend
- Supported Nozzles: 0.2 / 0.4 / 0.6 / 0.8 mm
- Input Shaping + Pressure Advance
- AI Camera: 720p with Smart Detection
- Auto Leveling and Z-Offset Calibration
- Print Surface: Dual-sided PEI Plate
- Compatible Materials: PLA, PETG, TPU, PLA-CF
- Connectivity: Wi-Fi, USB Drive, RS-485
- Storage: 8G EMMC + Creality OS
- CFS Lite / CFS Mini Multicolor Support
ANYCUBIC
Anycubic Kobra X Color 3D Printer
- Native 4-Color Printing System
- 260×260×260 mm³ Build Volume
- Expandable Up to 19 Colors
- ACE GEN 2 Multicolor Technology
- 81.25% Less Filament Change Waste
- 300 mm/s Default Print Speed
- 600 mm/s Maximum Print Speed
- 20,000 mm/s² Max Acceleration
- LeviQ 3.0 49-Point Auto-Leveling
- Direct Drive Extruder System
- Supports PLA, PETG, TPU, ASA
- AI Spaghetti & Object Detection
- 720P Camera for Live Monitoring
- Ultra-Quiet Operation ≤48 dB
CREALITY
Creality Ender-5 Max
- Creality Ender-5 Max 3D Printer
- Enormous 400×400×400mm Build volume
- Ultra Fast Printing 700 mm/s
- die-cast aluminum alloy frame
- 36-point auto leveling
- Printing Accuracy 100±0.1 mm
- Layer Height 0.05-0.3 mm
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
CREALITY
Creality Ender-3 V3 Plus
- Creality Ender-3 V3 Plus 3D Printer
- Max Printing Volume 300*300*300mm
- Max Printing Speed 600mm/s
- Max Extruder Temp 300°C
- Max Bed Temp 100°C
- Fully Automatic Bed Leveling
- 4.3Inch Touch Screen Controller
- Tough Aerospace Aluminum Alloy
- Quick-swap Nozzle
- Two Powerful Motors on Y-axis
- Automated XZ Belt Tensioning
- Printing Accuracy ±0.2mm
CREALITY
Creality HALOT X1 Resin 3D Printer
- Creality HALOT X1 16K
- 10.1-inch advanced monochrome LCD screen
- Pixel size 14 × 19 µm for extreme accuracy
- True leveling-free printing system built-in
- Fast printing speed up to 170 mm per hour
- One-second quick-release build plate design
- Quick-release resin vat for easy handling
- 92-zone intelligent exposure for clarity
- Stable top-down motion with dual rails
- Z-axis accuracy up to 0.01 mm guaranteed
- Smart AFU resin management system built-in
- Supports versatile 405 nm UV printing resin
- Easy file transfer via USB and WiFi options
- 3.98-inch capacitive touchscreen interface
- 3DRAYAN.COM official Piocreat dealer in UAE
CREALITY
Creality Hi 3D Printer
- Creality Hi 3D Printer
- Build Volume 260×260×300mm
- Printing Speed up to 500mm/s
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
- Full-auto leveling
- 3.2" color touch screen
- Built-in Sensor to Read Filament Info
- All-metal Body
- Monitoring Camera with a Privacy Cap
ANYCUBIC
Anycubic Photon P1 Resin 3D Printer
- Industrial-grade ball screw for ultra-stable motion
- Supports high-viscosity resins up to 8000 cps
- Wave Release tech reduces peel force by 60%
- Precision-milled steel build plate <80 microns
- LCD alignment accuracy below 70 microns
- LighTurbo 4.0 with <2° light collimation
- Over 92% full-screen light uniformity
- Dual-material printing with optional kit
- Resin temperature control up to 40°C
- Intelligent Leveling System 3.0
- Dynamic Release System 3.0
- Light-Off Compensation 3.0
- NFEP film for smooth, consistent curing
- Remote monitoring via built-in camera
- One-click slicing in Photon Workshop 4.0
HeyGears
HeyGears Reflex 2 3D Printer
- 161 OptiZone Light Engine for precision
- 10.7-inch 6K Amber Pro screen upgrade
- Screen lifespan exceeds 6 000 hours
- AI light calibration across 86 000 zones
- C5 grade Z-axis ± 2 µm accuracy
- Die-cast unibody base for rigidity
- Advanced thermal cooling system
- Intelligent temperature control ± 1 °C
- High-sensitivity residue detection 0.01 N
- Auto leveling platform 0.15° deviation
- Wide compatibility with pro resins
- Modular design for easy maintenance
HeyGears
HeyGears Reflex 2 Pro 3D Printer
- 230×144×350 mm Build Volume
- 2.3× Larger Print Capacity
- 1032-Zone OptiZone Light Engine
- 86,000+ AI Light Calibration Zones
- Amber Screen Pro with 6000h Lifespan
- C5 Grade Precision Z-Axis Module
- Intelligent ±1°C Temperature Control
- Auto Resin Refill with Ultrasonic Sensor
- Floating Build Platform Auto-Leveling
- Die-Cast Unibody Aluminum Frame
- 0.15 mm Residue Detection Sensor
- Supports High-Viscosity Resins
- 25,600 Microstep FOC Motor Control
- Available at 3DRAYAN.COM UAE
ANYCUBIC
Anycubic Photon Mono M7 Pro
- Anycubic Photon Mono M7 Pro
- Max Printing Speed 170mm/h
- 10.1'', 14K Mono LCD
- Resolution 13320 * 5120
- 5" IPS Touch Controller
- Auto Resin Refill, Withdrawal
- Auto-Adaptive Technology Control Heating
- Intelligent Workflow-Assist Printing
- Dynamic Temperature Control Resin VAT
ELEGOO
ELEGOO OrangeStorm Giga
- ELEGOO OrangeStorm Giga
- Build Volume 800x800x1000mm
- Printing Speed 300mm/s
- Multi-Nozzle Printing
- Portable 7-inch Controller
- Multi link Printing Plate
- Max Bed Temp 90°C
- Max Extruder Temp 300℃
ELEGOO
ELEGOO Centauri Carbon 3D Printer
- ELEGOO Centauri Carbon 3D Printer
- Build Volume 256×256×256 mm
- Fully enclosed chamber
- Max Printing Speed 500 mm/s
- Support Auto-Leveling
- Layer Thickness 0.1-0.4 mm
- 4.3-inch Capacitive Touch Screen Controller
- Max Hot End Temperature 320 °C
- Max Heated Bed Temperature 110 °C
HeyGears
HeyGears UltraCraft Reflex RS Combo
- C5 Z-axis accuracy up to ±2µm
- 10.3" 8K mono LCD screen
- 60-zone screen calibration
- Printing accuracy ±15µm
- 33% faster printing speed
- Adaptive Z compensation 180 setups
- Residue detection 0.2mm
- Auto screen leveling ±0.15°
- One-click auto slicing
- Heated resin tank (optional)
- Real-time force monitoring
- Smart USB & Wi-Fi connectivity
HeyGears
HeyGears UltraCraft Reflex Combo
- Fully automated 3D printing workflow
- Ultra-high precision with 33μm XY resolution
- Smart AI-assisted peeling force management
- Automatic resin level detection and refill
- Heated resin tray for stable print quality
- Powerful 385+nm UV light for faster curing
- Optimized dual curing for stronger materials
- Intelligent regional exposure technology
- Advanced Z-axis compensation for smooth surfaces
- Consistent printing performance over time
- Wide compatibility with advanced resins
- Compact design with Wi-Fi and Ethernet support
HeyGears
HeyGears UltraCraft Reflex RS Turbo Combo
- Amber 8K Screen with 566:1 contrast ratio
- Ultra-sharp details with ±15 μm printing accuracy
- 4.5s per layer high-speed 3D printing
- Dynamic Motion Algorithm 3.0 boosts speed by 33%
- Adaptive resin optimization for 180+ process combos
- Automatic one-click pre-processing & slicing
- Real-time force monitoring with residue detection
- Heated resin tank for stable viscosity and print quality
- C5-grade Z-axis module with ≤2 μm positioning error
- WiFi & USB connectivity for seamless workflow
HeyGears
HeyGears UltraCraft Reflex 3D Printer
- AI-assisted peeling for flawless layer separation
- 33μm XY resolution with ±16μm printing accuracy
- Automatic resin refill with ±5g weight detection
- Heated resin tray maintains optimal 22°C temperature
- 90.6% detail restoration with ≤0.05mm surface tolerance
- Intelligent regional exposure for stronger structures
- Z-axis compensation reduces deformation and defects
- 385+nm UV light for 1.5× faster resin curing
- 90% uniformity across the entire build plate
- Supports advanced engineering-grade resins
BAMBU LAB
Bambu Lab H2S AMS Combo 3D Printer
- Large build volume 340×320×340 mm
- Multi-color printing with AMS 2 Pro
- Supports up to 24 colors & materials
- Optical calibration at 5μm accuracy
- All-metal nozzle with 350°C heat
- Heated chamber up to 65°C
- Automatic filament drying system
- 23 smart sensors & 3 AI cameras
- Print speed up to 1000 mm/s
- Servo motor with 67% more extrusion
- Optional 10W laser cutting module
- Active vibration compensation system
- Sturdy, integrated metal body design
- Ultra-quiet operation under 50 dB
![]()
BAMBU LAB
Bambu Lab H2D AMS Combo 3D Printer
- Dual-nozzle system for multi-material & multi-color printing
- Maximum print speed up to 600mm/s
- Massive build volume: 350×320×325 mm³
- High-temperature all-metal hotend: up to 350°C
- 65°C actively heated chamber for warp-free printing
- Supports over 20 materials: PLA, ABS, PETG, TPU, PC, PA
- REAL High-Flow Hotend: up to 65mm³/s flow rate
- Intelligent DynaSense Extruder with closed-loop servo control
- Automatic multi-color and multi-filament printing
- Supports up to 16 filaments
- 15-point filament monitoring system for feeding, tip location, tension & flow
- AI and Smart Features
- AI-powered pre-flight checklist
- Built-in cameras: BirdsEye, Nozzle, Toolhead
- Auto bed leveling and Z-offset calibration
- Real-time error detection (clogs, tangles, under-extrusion)
- Power loss recovery & filament runout detection
- Compatible with optional 10W / 40W laser modules
- Compatible with digital cutting blade module
- Compatible with pen plotter tool for writing/drawing
- Quick-swap toolheads with automatic recognition
- Laser Power: 10W or 40W (455nm)
- Engraving area: up to 310×270 mm
- Engraves and cuts wood, acrylic, leather, rubber, and more
- Micro Lidar for 3D mesh generation and Z-height sensing
- Built-in air assist, flame detection, and safety systems
- Digital Cutting & Drawing
- Cutting area: 300×285 mm²
- Blade pressure: 50gf to 600gf
- Supports vinyl, paper, fabric, leather, etc.
BAMBU LAB
Bambu Lab A1 Combo
- Bambu Lab A1 Combo 3D printer
- Multi-Color Printing With AMS
- Build Volume:256*256*256 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 100℃
- built-in Monitoring camera
ANYCUBIC
Anycubic Kobra 3 Max
- Anycubic Kobra 3 MAX
- With Multi Filament 3D Priting Anycubic Ace Pro
- Max Print Volume 425*425*500mm
- Max Priting Speed 600mm/s
- Max Nozzle Temp 300℃
- Max Bed Temp 110℃
- Vibration Compensation System
ANYCUBIC
Anycubic Kobra S1 Combo
- Anycubic Kobra S1 Combo
- Print Volume 250*250*250mm
- Printing Speed up to 600mm/s
- 8 Color 3D Printing
- Ultra-Quiet Printing 33dB
- Compatible with PLA, PETG, TPU，ABS, ASA
- Nozzle temperature 320°C
- Hotbed temperature 120℃
ELEGOO
ELEGOO Saturn 4 Ultra 16K
- Elegoo Saturn 4 Ultra 16K
- Build Volume 211.68*118.37*220
- 10Inch Monochrome LCD 11520*5120
- XY Resolution 19*24um
- Real-Time Monitoring Ai HD Camera
- Layer Thickness 0.01-0.2mm
- Fully Automatic Leveling
- Tilt Release Technology for faster Printing
- Printing Speed up to 150mm/h
- enhance printing by Heating tank
- Wi-Fi File Transfer & Cluster Printing
ANYCUBIC
Anycubic Photon Mono M7 Max
- Anycubic Photon Mono M7 Max
- Resin Auto-Fill Unit
- Build Volume 298x164x300mm
- 13.6 inch monochrome 7K screen
- X/Y Axis Resolution 46*46μm
- LighTurbo 3.0 High-Precision Light Source System
- Maximum print speed op to 86mm/h
- Dynamic temperature control resin vat
- Intelligence Assisted Printing System
- Light Source COB light source+ Fresnel lens
- Light Intensity 4500±10%μW/cm²
ELEGOO
ELEGOO Jupiter SE 6K
- 12.8-inch 6K mono LCD
- PFA Release Film
- Light Source COB light source
- Print Speed Up to 70mm/H
- XY Resolution of 51*51um
- Build Volume of 277.848*156.264*300 mm³
- 3.5-inch Capacitive Touch Screen Controller
CREALITY
Creality K1C
- Creality K1C 3D Printer
- 600mm/s Printing Speed
- Versatile Ai LiDAR
- Priting Dimention : 220*220*250mm
- Maximum Hotend Temp 300℃
- Maximum HotBed Temp 100℃
- Equipted to Ai Camera
- equipped to Air Purifier
CREALITY
Creality K1 Max
- Creality K1 Max 3D Printer
- 600mm/s Printing Speed
- Versatile Ai LiDAR
- Priting Dimention : 300*300*300mm
- Maximum Hotend Temp 300℃
- Maximum HotBed Temp 100℃
- Equipted to Ai Camera
- equipped to Air Purifier
CREALITY
Creality Ender-3 V3 KE
- Creality Ender-3 V3 KE 3D Printer
- Build Volume 220*220*240mm
- Max Printing Speed 500mm/s
- Max Nozzle Temp 300
- Max Bed Temp 100
- 4.3" Color Touch Screen Controller
- Layer Thickness 0.1-0.35mm
ELEGOO
ELEGOO JUPITER 2 16K
- Large build volume: 302.4 × 161.98 × 300 mm
- 14-inch 16K LCD with 20×26μm XY resolution
- New dual-door design for better accessibility
- Multi-point auto-leveling system for precision
- Quick LCD replacement in just 10 minutes
- Release film replacement in only 10 seconds
- Smart resin feeding and recycling system (2kg tank)
- Heated resin vat for stable printing temperature
- Built-in camera with adaptive lighting and alerts
- Compatible with Elegoo SatelLite slicer software
English
العربية
