Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Brand:
BAMBU LAB
-
Brand:
FLSUN
-
Brand:
HeyGears
-
Brand:
Piocreat
-
Brand:
PRUSA
![]()
BAMBU LAB
Bambu Lab H2D AMS Combo 3D Printer
- Dual-nozzle system for multi-material & multi-color printing
- Maximum print speed up to 600mm/s
- Massive build volume: 350×320×325 mm³
- High-temperature all-metal hotend: up to 350°C
- 65°C actively heated chamber for warp-free printing
- Supports over 20 materials: PLA, ABS, PETG, TPU, PC, PA
- REAL High-Flow Hotend: up to 65mm³/s flow rate
- Intelligent DynaSense Extruder with closed-loop servo control
- Automatic multi-color and multi-filament printing
- Supports up to 16 filaments
- 15-point filament monitoring system for feeding, tip location, tension & flow
- AI and Smart Features
- AI-powered pre-flight checklist
- Built-in cameras: BirdsEye, Nozzle, Toolhead
- Auto bed leveling and Z-offset calibration
- Real-time error detection (clogs, tangles, under-extrusion)
- Power loss recovery & filament runout detection
- Compatible with optional 10W / 40W laser modules
- Compatible with digital cutting blade module
- Compatible with pen plotter tool for writing/drawing
- Quick-swap toolheads with automatic recognition
- Laser Power: 10W or 40W (455nm)
- Engraving area: up to 310×270 mm
- Engraves and cuts wood, acrylic, leather, rubber, and more
- Micro Lidar for 3D mesh generation and Z-height sensing
- Built-in air assist, flame detection, and safety systems
- Digital Cutting & Drawing
- Cutting area: 300×285 mm²
- Blade pressure: 50gf to 600gf
- Supports vinyl, paper, fabric, leather, etc.
BAMBU LAB
Bambu Lab H2S AMS Combo 3D Printer
- Large build volume 340×320×340 mm
- Multi-color printing with AMS 2 Pro
- Supports up to 24 colors & materials
- Optical calibration at 5μm accuracy
- All-metal nozzle with 350°C heat
- Heated chamber up to 65°C
- Automatic filament drying system
- 23 smart sensors & 3 AI cameras
- Print speed up to 1000 mm/s
- Servo motor with 67% more extrusion
- Optional 10W laser cutting module
- Active vibration compensation system
- Sturdy, integrated metal body design
- Ultra-quiet operation under 50 dB
BAMBU LAB
Bambu Lab A1 Combo
- Bambu Lab A1 Combo 3D printer
- Multi-Color Printing With AMS
- Build Volume:256*256*256 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 100℃
- built-in Monitoring camera
BAMBU LAB
Bambu Lab X1-Carbon Combo
- Bambu Lab X1 Carbon COMBO 3D printer
- Equipped with the AMS System
- Build Volume:256×256×256mm
- High quality printing with 7 μm Lidar Resolution
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab A1 mini
- Bambu Lab A1 mini 3D printer
- Build Volume:180*180*180 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 80℃
- built-in Monitoring camera
BAMBU LAB
Bambu Lab P1P
- Bambu Lab P1P 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab P1S Combo
- Bambu Lab P1S 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- Enclosed-body for high-temperature filament printing
- Up to 16-color printing with AMS
- built-in chamber camera
BAMBU LAB
Bambu Lab P1S
- Bambu Lab P1S 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
PRUSA
Prusa MK4 3D Printer
- Prusa MK4 3D Printer 3D Printer
- Build Volume 250x210x220mm
- Print Speed Up to 600 mm/s
- Hotend Max Temp 290 °C
- Build Plate Max Temp 120 °C
- Automatic, Mesh Bed Leveling
- 3.5" Removable Touch Screen Controller
- PEl Magnetic Spring Steel Printing bed
BAMBU LAB
Bambu Lab X1-Carbon
- Bambu Lab X1 Carbon 3D printer
- Build Volume:256×256×256mm
- High quality printing with 7 μm Lidar Resolution
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab X1E
- Bambu Lab X1E 3D printer
- Build Volume:256×256×256mm
- High quality printing with 7 μm Lidar Resolution
- Max Speed : 500mm/s
- Max Hot End Temperature : 320 ℃
- Chamber Control Temperature 60℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab A1 mini Combo
- Bambu Lab A1 mini Combo 3D printer
- Equipped with AMS system
- Build Volume:180*180*180 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 80℃
- built-in Monitoring camera
FLSUN
FLSUN S1
- FLSUN S1 3D Printer
- Max Printing Speed 1200mm/s
- Max Build Volume 320*320*430 mm³
- Printing Control System Microtac Radar
- Fully Automatic Leveling
- Max Nozzle Temp 350℃
- Max Bed Temp 120℃
- Dual-Gear Direct Drive Extruder
- Printing Accuracy 0.1mm
- Layer Height 0.1-0.35mm
FLSUN
FLSUN T1
- FLSUN T1 3D Printer
- Max Printing Speed 1000mm/s
- Max Build Volume ⌀320*430mm
- Ai Printing Quality contorl
- Fully Automatic Leveling
- Max Nozzle Temp 300℃
- Max Bed Temp 110℃
- Dual-Gear Direct Drive Extruder
- Printing Accuracy 0.1mm
- Layer Height 0.1-0.35mm
FLSUN
FLSUN S1 PRO
- FLSUN S1 PRO 3D Printer
- Max Printing Speed 1200mm/s
- Max Build Volume Φ320*430mm
- Fine Printing with FLSUN Algorithms 2.0 and AI Inspection
- Fully Automatic Leveling
- Quieter down to 55dB
- Max Nozzle Temp 350℃
- Max Bed Temp 120℃
- Dual-Gear Direct Drive Extruder
- Printing Accuracy 0.1mm
- Layer Height 0.1-0.35mm
BAMBU LAB
Bambu Lab H2D 3D Printer
- Bambu Lab H2D 3D Printer
- Dual-nozzle printing
- 350×320×325 mm³ print volume
- 350°C nozzle & 65°C chamber heat
- Optional 10W/40W laser module
- Digital cutter and pen support
- 600 mm/s high-speed printing
- AI-powered nozzle and top cameras
- 5μm optical motion calibration
- Servo-controlled DynaSense extruder
- Auto pre-flight check and alignment
BAMBU LAB
Bambu H2D Laser Full Combo
- Bambu H2D Laser Full Combo
- Optional 10W/40W Laser and Cutting Module
- Multi-material 3D Printing
- Dual-nozzle printing
- 350×320×325 mm³ print volume
- 350°C nozzle & 65°C chamber heat
- Optional 10W/40W laser module
- Digital cutter and pen support
- 600 mm/s high-speed printing
- AI-powered nozzle and top cameras
- 5μm optical motion calibration
- Servo-controlled DynaSense extruder
- Auto pre-flight check and alignment
HeyGears
HeyGears UltraCraft Reflex RS Turbo Combo
- Amber 8K Screen with 566:1 contrast ratio
- Ultra-sharp details with ±15 μm printing accuracy
- 4.5s per layer high-speed 3D printing
- Dynamic Motion Algorithm 3.0 boosts speed by 33%
- Adaptive resin optimization for 180+ process combos
- Automatic one-click pre-processing & slicing
- Real-time force monitoring with residue detection
- Heated resin tank for stable viscosity and print quality
- C5-grade Z-axis module with ≤2 μm positioning error
- WiFi & USB connectivity for seamless workflow
HeyGears
HeyGears UltraCraft Reflex Combo
- Fully automated 3D printing workflow
- Ultra-high precision with 33μm XY resolution
- Smart AI-assisted peeling force management
- Automatic resin level detection and refill
- Heated resin tray for stable print quality
- Powerful 385+nm UV light for faster curing
- Optimized dual curing for stronger materials
- Intelligent regional exposure technology
- Advanced Z-axis compensation for smooth surfaces
- Consistent printing performance over time
- Wide compatibility with advanced resins
- Compact design with Wi-Fi and Ethernet support
HeyGears
HeyGears UltraCraft Reflex RS Combo
- C5 Z-axis accuracy up to ±2µm
- 10.3" 8K mono LCD screen
- 60-zone screen calibration
- Printing accuracy ±15µm
- 33% faster printing speed
- Adaptive Z compensation 180 setups
- Residue detection 0.2mm
- Auto screen leveling ±0.15°
- One-click auto slicing
- Heated resin tank (optional)
- Real-time force monitoring
- Smart USB & Wi-Fi connectivity
HeyGears
HeyGears UltraCraft Reflex 3D Printer
- AI-assisted peeling for flawless layer separation
- 33μm XY resolution with ±16μm printing accuracy
- Automatic resin refill with ±5g weight detection
- Heated resin tray maintains optimal 22°C temperature
- 90.6% detail restoration with ≤0.05mm surface tolerance
- Intelligent regional exposure for stronger structures
- Z-axis compensation reduces deformation and defects
- 385+nm UV light for 1.5× faster resin curing
- 90% uniformity across the entire build plate
- Supports advanced engineering-grade resins
BAMBU LAB
Bambu Lab H2S 3D Printer
- 340×320×340mm³ large build volume
- AI-powered optical motion calibration
- Motion accuracy under 50 microns
- 350°C all-metal hotend for engineering filaments
- 65°C actively heated print chamber
- 23 smart sensors with 3 onboard cameras
- Full-path AI filament monitoring system
- High-speed printing up to 1000 mm/s
- Active vibration compensation technology
- Integrated air filtration & smart venting
- Durable die-cast aluminum frame design
- Cloud & offline control with developer mode
BAMBU LAB
Bambu Lab H2S Laser Full Combo
- Large build volume 340×320×340 mm
- Multi-color printing with AMS 2 Pro
- 10W Laser and Cutting Module
- Supports up to 24 colors & materials
- Optical calibration at 5μm accuracy
- All-metal nozzle with 350°C heat
- Heated chamber up to 65°C
- Automatic filament drying system
- 23 smart sensors & 3 AI cameras
- Print speed up to 1000 mm/s
- Servo motor with 67% more extrusion
- Optional 10W laser cutting module
- Active vibration compensation system
- Sturdy, integrated metal body design
- Ultra-quiet operation under 50 dB
Piocreat
Piocreat HALOT X1 Resin 3D Printer
- Ultra 16K resolution with stunning details
- 10.1-inch advanced monochrome LCD screen
- Pixel size 14 × 19 µm for extreme accuracy
- True leveling-free printing system built-in
- Fast printing speed up to 170 mm per hour
- One-second quick-release build plate design
- Quick-release resin vat for easy handling
- 92-zone intelligent exposure for clarity
- Stable top-down motion with dual rails
- Z-axis accuracy up to 0.01 mm guaranteed
- Smart AFU resin management system built-in
- Supports versatile 405 nm UV printing resin
- Easy file transfer via USB and WiFi options
- 3.98-inch capacitive touchscreen interface
- 3DRAYAN.COM official Piocreat dealer in UAE
English
العربية
