Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Categories:
3D Printer
-
Categories:
Filamets
-
Categories:
Resin
-
Brand:
ANYCUBIC
-
Brand:
BlueCast
-
Brand:
Polymaker
ANYCUBIC
Anycubic Water-Wash Resin+
- Water Washable & Slight Odor
- Low Viscosity for Fast Printing
- High Precision with Low Shrinkage
- Density 1.2 g/cm3
- Viscosity 150~250 mPa
- Hardness 80Shore D
- Tensile Strength 30-45MPa
ANYCUBIC
Anycubic ABS-Like Resin V2
- Anycubic ABS-Like Resin V2
- Water-Washable
- Excellent Toughness
- Durability and Well-Performance
- High Precision Minimal Shrinkage
ANYCUBIC
Anycubic Standard Resin V2
- Anycubic Standard Resin V2
- Superior Strength and Durability
- Elongation at break 25-30%
- Density 1.05-1.25g/cm³
- Viscosity 250-350 cP·mPa·s
- Hardness 80-83D
- Flexural modulus 1500-2100 MPa
- Resin wash Alcohol
- Exceptional Precision with Minimal Distortion
- High Impact Resistance and Broad Compatibility
ANYCUBIC
Anycubic Tough Resin 2.0
- Anycubic Tough Resin 2.0
- Density 1.10-1.15g/cm³
- Elongation at break 30-50%
- Hardness 76 Shore D
- Viscosity 150-250MPa·s（25℃）
- Heat deflection temp>60-65℃
- Exceptional Toughness & Resistant to Breakage
- Strong Elongation & High Flexibility
- High Precision, Minimal Shrinkage
ANYCUBIC
Anycubic Photon Mono M7 Pro
- Anycubic Photon Mono M7 Pro
- Max Printing Speed 170mm/h
- 10.1'', 14K Mono LCD
- Resolution 13320 * 5120
- 5" IPS Touch Controller
- Auto Resin Refill, Withdrawal
- Auto-Adaptive Technology Control Heating
- Intelligent Workflow-Assist Printing
- Dynamic Temperature Control Resin VAT
ANYCUBIC
Anycubic Tough Resin Ultra
- Anycubic Tough Resin Ultra
- Density 1.05-1.25g/cm³
- Elongation at break 70-80%
- Flexural strength 15-25 MPa
- Hardness 71-75D
- Strong lmpact Resistance
- Flexible with Excellent Rebound
ANYCUBIC
Anycubic High Clear Resin
- Anycubic High Clear Resin
- Density 1.05-1.25g/cm³
- Elongation at break 14.6%
- Hardness 78D
- Tensile strength 28.1 MPa
- Molding shrinkage 3.72-4.24%
- Prevents Yellowing
- Durable and Robust
- Mild Scent and Safe
ANYCUBIC
Anycubic Kobra S1 Combo
- Anycubic Kobra S1 Combo
- Print Volume 250*250*250mm
- Printing Speed up to 600mm/s
- 8 Color 3D Printing
- Ultra-Quiet Printing 33dB
- Compatible with PLA, PETG, TPU，ABS, ASA
- Nozzle temperature 320°C
- Hotbed temperature 120℃
ANYCUBIC
Anycubic PLA Basic
- Anycubic PLA Basic 3D Printer Filament
- Neat Spool and No Tangle
- High Precision and Accuracy
- Eco-Friendly, Biodegradable
ANYCUBIC
Anycubic Photon Mono M7 Max
- Anycubic Photon Mono M7 Max
- Resin Auto-Fill Unit
- Build Volume 298x164x300mm
- 13.6 inch monochrome 7K screen
- X/Y Axis Resolution 46*46μm
- LighTurbo 3.0 High-Precision Light Source System
- Maximum print speed op to 86mm/h
- Dynamic temperature control resin vat
- Intelligence Assisted Printing System
- Light Source COB light source+ Fresnel lens
- Light Intensity 4500±10%μW/cm²
ANYCUBIC
Anycubic PLA High Speed
- Anycubic PLA High Speed
- Priting Up to 500mm/s
- Enhanced Fluidity and Better Cooling Effect
ANYCUBIC
Anycubic PLA Silk
- Anycubic PLA Silk Filament
- Silk Feel and Lustre
- Eco-Friendly, Biodegradable
- Widely Applicable to Printers
ANYCUBIC
Anycubic PLA+
- Anycubic PLA+ 3D Pinter Filament
- High Toughness
- High precision and minimal shrinkage
- Eco-Friendly
- Compatible with all of FDM 3D Printer
ANYCUBIC
Anycubic Kobra 3 Combo
- Anycubic Kobra 3 Combo
- With Multi Filament 3D Priting Anycubic Ace Pro
- Max Print Volume 250*250*260mm
- Max Priting Speed 600mm/s
- Max Nozzle Temp 300℃
- Max Bed Temp 100℃
ANYCUBIC
Anycubic PETG Filament
- Anycubic PETG Filament
- Strong and Durable
- Clear and Vibrant
- Prop Bed Temp 75~90℃
- Prop Nozzle Temp 230~250℃
ANYCUBIC
Anycubic Photon Mono M5s Pro
- 10.1-inch 14K Mono LCD
- ACF Release Film
- LED matrix UV light source
- Print Speed Up to 105mm/h
- XY Resolution of 16.8*24.8μm
- Wi-Fi Transfer Speeds of 6-10Mbps
- Build Volume of 200x223.78x126.38 mm³
- 4.3-inch Capacitive Touch Screen Controller
- Equipped to Air Heater & Purifier
BlueCast
BLUECAST X-ONE V2
- 0% shrinkage, perfect dimensional accuracy
- No UV post-curing required after printing
- Ultra-fast burnout: 2 hours at 700°C
- Compatible with DLP & LCD 3D printers
- Smooth surfaces and sharp engravings
- Ideal for solid rings and dense models
- Safe, odorless, low VOC resin
- Easy cleanup with ethyl alcohol
- Excellent casting with any investment
BlueCast
BlueCast X-WAX Filigree Resin
- Designed for filigree and Arabic jewelry
- Extreme printability with sharp details
- Smooth surface, minimal polishing needed
- High wax content for clean casting
- Supports LCD and DLP 3D printers
- Superior strength for thin-walled parts
- Easy support removal, no surface damage
- Fast printing vs traditional wax printers
- UV post-curing enhances model durability
- Works with standard burnout cycles
BlueCast
BLUECAST X-WAX Resin
- Contains 80% real wax for clean burnout
- No UV post-curing needed after print
- Extreme castability for metal jewelry
- Perfect for solid rings and thick parts
- Prints on LCD and DLP printers
- Fast printing up to 5× wax printers
- Leaves zero ash after burnout
- Works with low-cost 3D printers
- Supports standard burnout cycles
- Environmentally friendly formulation
ANYCUBIC
Anycubic PLA Pantone
- Anycubic PLA Pantone
- Co-Created with Pantone Color Institute
- Density 1.23g/cm³
- Tensile Strength 60MPa
- Eco-friendly
- +0.02mm precision
- Prop Extruder Temp 200~210°C
- Prop Bed Temp 50-60°C
Polymaker
Polymaker PolyTerra PLA
- Polymaker PolyTerra PLA
- Eco-Friendly
- A World of Color & Effects
- Printing Speed 30mm/s - 70mm/s
- Prop Bed Temperature: 25˚C - 60˚C
- Printing Temperature: 190˚C - 230˚C
- Jam-Free Technology
Polymaker
Polymaker PolySonic PLA Pro
- Polymaker PolySonic PLA Pro
- High-speed Printing up to 300 mm/s
- Impact resistance like ABS
- Prop Extruder Tempo 210 - 230 °C
- Prop Bed Temp 25 - 60 °C
Polymaker
Polymaker PolyTerra PLA+
- Polymaker PolyTerra PLA+
- Boosting the Toughness
- Better layer adhesion
- Density 1.24 g/cm3
- Nozzle Temp 190–220 ℃
- Build plate temperature 30-60˚C
- Printing Speed 30-70mm/s
ANYCUBIC
Anycubic Kobra 2 Max
- Anycubic Kobra 2 Max 3D Printer
- Build Volume 420*420*500mm
- Print Speed Up to 500 mm/s
- Hotend Max Temp 260 °C
- Build Plate Max Temp 90 °C
- Anycubic LeviQ 2.0 Automatic Leveling 49 Points
- 4.3" Removable Touch Screen Controller
- PEl Magnetic Spring Steel Printing bed
English
العربية
