Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Categories:
3D Printer
-
Categories:
Filamets
-
Categories:
Laser Engravers
-
Categories:
Resin
-
Brand:
BlueCast
-
Brand:
ELEGOO
ELEGOO
ELEGOO Centauri Carbon 3D Printer
- ELEGOO Centauri Carbon 3D Printer
- Build Volume 256×256×256 mm
- Fully enclosed chamber
- Max Printing Speed 500 mm/s
- Support Auto-Leveling
- Layer Thickness 0.1-0.4 mm
- 4.3-inch Capacitive Touch Screen Controller
- Max Hot End Temperature 320 °C
- Max Heated Bed Temperature 110 °C
ELEGOO
ELEGOO OrangeStorm Giga
- ELEGOO OrangeStorm Giga
- Build Volume 800x800x1000mm
- Printing Speed 300mm/s
- Multi-Nozzle Printing
- Portable 7-inch Controller
- Multi link Printing Plate
- Max Bed Temp 90°C
- Max Extruder Temp 300℃
ELEGOO
ELEGOO Saturn 4 Ultra 16K
- Elegoo Saturn 4 Ultra 16K
- Build Volume 211.68*118.37*220
- 10Inch Monochrome LCD 11520*5120
- XY Resolution 19*24um
- Real-Time Monitoring Ai HD Camera
- Layer Thickness 0.01-0.2mm
- Fully Automatic Leveling
- Tilt Release Technology for faster Printing
- Printing Speed up to 150mm/h
- enhance printing by Heating tank
- Wi-Fi File Transfer & Cluster Printing
ELEGOO
ELEGOO Jupiter SE 6K
- 12.8-inch 6K mono LCD
- PFA Release Film
- Light Source COB light source
- Print Speed Up to 70mm/H
- XY Resolution of 51*51um
- Build Volume of 277.848*156.264*300 mm³
- 3.5-inch Capacitive Touch Screen Controller
ELEGOO
ELEGOO Mars 5 Ultra
- ELEGOO Mars 5 Ultra 3D Printer
- 7-inch 9K Mono LCD
- Printing Speed 150mm/h
- Resolution 8520x4320
- XY Resolution 18x18μm
- Smart Printing with AI Camera
- Automatic Build Plate Leveling
- Layer Thickness 0.01-0.2mm
- 9H Screen Protector
- 4.0-inch Capacitive Touch Screen Controller
- Z-AXIS Accuracy 0.02mm
- Real-Time Monitoring
ELEGOO
Elegoo Phecda Laser Engraver & Cutter 10W
- Elegoo Phecda Laser Engraver & Cutter 10W
- 400x400 mm Engraving Area
- Up to 25,000 mm/min Engraving Speed
- Smoke Filtering Exhaust
- Multiple Operation Methods
- Laser wavelength 455±5nm
- Maximum cuttingdepth ≤8mm Basswood Board
- Laser Spot size 0.06mm×0.06mm
- Expandable Functions Rotary Attachment, Air Assist
ELEGOO
Elegoo Phecda Laser Engraver & Cutter 20W
- Elegoo Phecda Laser Engraver & Cutter 20W
- 400x400 mm Engraving Area
- Up to 25,000 mm/min Engraving Speed
- Smoke Filtering Exhaust
- Multiple Operation Methods
- Laser wavelength 455±5nm
- Maximum cuttingdepth ≤14mm Basswood Board
- Laser Spot size 0.07x0.13mm
- Expandable Functions Rotary Attachment, Air Assist
ELEGOO
ELEGOO Saturn 4 Ultra
- ELEGOO Saturn 4 Ultra Resin 3D Printer
- 10" Mono LCD 12K
- Resolution 11520*5120
- XY Resolution 19*24um
- Build Volume 218.88*122.88*220mm
- Layer Thickness 0.01-0.2mm
- Printing Speed 150mm/H
- Printing Technology : MSLA Stereo lithography
- Light Source COB + Fresnel Collimating Lens
- PFA release film
- 4-inch capacitive touch screen Controller
- Real-Time AI Monitoring And Time
- Automatic Build Plate Leveling
BlueCast
BLUECAST X-ONE V2
- 0% shrinkage, perfect dimensional accuracy
- No UV post-curing required after printing
- Ultra-fast burnout: 2 hours at 700°C
- Compatible with DLP & LCD 3D printers
- Smooth surfaces and sharp engravings
- Ideal for solid rings and dense models
- Safe, odorless, low VOC resin
- Easy cleanup with ethyl alcohol
- Excellent casting with any investment
BlueCast
BlueCast X-WAX Filigree Resin
- Designed for filigree and Arabic jewelry
- Extreme printability with sharp details
- Smooth surface, minimal polishing needed
- High wax content for clean casting
- Supports LCD and DLP 3D printers
- Superior strength for thin-walled parts
- Easy support removal, no surface damage
- Fast printing vs traditional wax printers
- UV post-curing enhances model durability
- Works with standard burnout cycles
ELEGOO
ELEGOO PLA Filament
- ELEGOO PLA Filament
- Density 1.20g/cm³
- Charpy impact 5.4kj/m²
- Termal Deformation Temp 53°C
- Prop Extruder Temp 190~220°C
- Prop Bed Temp 50-65°C
- Priting Speed 30-70mm/s
- Elongation at Break 11.2%
- Tensile Strength 50MPa
BlueCast
BLUECAST X-WAX Resin
- Contains 80% real wax for clean burnout
- No UV post-curing needed after print
- Extreme castability for metal jewelry
- Perfect for solid rings and thick parts
- Prints on LCD and DLP printers
- Fast printing up to 5× wax printers
- Leaves zero ash after burnout
- Works with low-cost 3D printers
- Supports standard burnout cycles
- Environmentally friendly formulation
ELEGOO
ELEGOO PLA Special Colored
- ELEGOO PLA Special Colored
- Density 1.20g/cm³
- Charpy impact 5.4kj/m²
- Termal Deformation Temp 53°C
- Prop Extruder Temp 190~220°C
- Prop Bed Temp 50-65°C
- Priting Speed 30-70mm/s
- Elongation at Break 11.2%
- Tensile Strength 50MPa
ELEGOO
ELEGOO Silk PLA
- ELEGOO ELEGOO Silk PLA
- Density 1.20g/cm³
- Charpy impact 5.4kj/m²
- Termal Deformation Temp 53°C
- Prop Extruder Temp 190~220°C
- Prop Bed Temp 50-65°C
- Priting Speed 30-70mm/s
- Elongation at Break 11.2%
- Tensile Strength 50MPa
ELEGOO
ELEGOO Saturn 3 Ultra 12K
- 10-inch 12K Mono LCD
- ACF Release Film
- Light Source COB+Reflective Light Source
- Print Speed Up to 150mm/h
- Linux OS with 4Gb RAM
- XY Resolution of 19×24μm
- Wi-Fi Transfer Speeds of 6-10Mbps
- Build Volume of 218.88×122.88×260 mm³
- 4.0-inch Capacitive Touch Screen Controller
ELEGOO
ELEGOO Mars 3 Ultra 9K
- 7-inch 9K mono LCD
- ACF Release Film
- Light Source COB light source + Fresnel collimating lens
- Print Speed Up to 150mm/h
- Linux OS with 4Gb RAM
- XY Resolution of 18μm
- Wi-Fi Transfer Speeds of 6-10Mbps
- Build Volume of 153.36x77.76x165 mm³
- 4.0-inch Capacitive Touch Screen Controller
ELEGOO
Elegoo Neptune 4 Pro
- Elegoo Neptune 4 PRO 3D Printer
- Build Volume 225*225*265mm
- Print Speed Up to 500 mm/s
- Hotend Max Temp 300 °C
- Build Plate Max Temp 110 °C
- Automatic Levelling over 121 Points
- 4.3" Removable Touch Screen Controller
- Klipper Frimware
- Dual-Drive-Gear Extruder
ELEGOO
Elegoo Neptune 4 Max
- Elegoo Neptune 4 Max 3D Printer
- Build Volume 420x420x480mm³
- Print Speed Up to 500 mm/s
- Hotend Max Temp 300 °C
- Build Plate Max Temp 85 °C
- Automatic Levelling over 121 Points
- 4.3" Removable Touch Screen Controller
- Klipper Frimware
- Dual-Drive-Gear Extruder
ELEGOO
Elegoo Saturn 3 12K
- Elegoo Saturn 3 12K Resin 3D Printer
- 10-inch 12K Mono LCD
- Build Volume of 218.88×122.88×250 mm³
- XY Resolution of 19×24μm
- Light Source COB + Fresnel Collimating Lens
- 3.5-inch Touch Screen Controller
- Layer Thickness 0.01-0.2mm
- Print Speed 70mm/h
ELEGOO
ELEGOO RAPID PLA Plus Filament
- Ultra-fast printing speed up to 600mm/s
- Enhanced toughness and high tensile strength
- Strong layer adhesion for smooth surfaces
- ±0.02mm high dimensional accuracy
- Tangle-free spools for uninterrupted printing
- Vacuum-sealed to prevent moisture and bubbles
- Eco-friendly biodegradable cardboard spool
- Wide compatibility with 1.75mm FDM printers
- Produces glossy, smooth, high-quality finishes
- Ideal for prototypes, models, and mass printing
ELEGOO
Elegoo Neptune 4 Plus
- Elegoo Neptune 4 Plus 3D Printer
- Print Volume 320x320x385mm³
- Max Printing Speed: 500 mm/s
- Max Nozzle Temp 300 °C
- Max Bed Temp 100 °C
- Auto Bed Leveling
- High Speed Klipper Mainboard
ELEGOO
Elegoo Neptune 4
- Elegoo Neptune 4 3D Printer
- Build Volume 225x225x265mm³
- Max Printing Speed: 500 mm/s
- Max Nozzle Temp 300 °C
- Max Bed Temp 110 °C
- 121 Points Auto Bed Leveling
- ARM 64-bit high-performance mainboard
- Powerful cooling system
ELEGOO
ELEGOO Mars 4 Max 6K
- ELEGOO Mars 4 Max 6K 3D Printer
- 9.1-inch 6K Mono LCD
- Build Volume 195.84x122.4x150mm³
- Layer Thickness 0.01-0.2 mm
- Printing Speed 30-70 mm/h
- 3.5" Touch Screen Controller
- PRINTING TECHNOLOGY MSLA
- Light Source COB light source + refraction
- Internal Air Purifier
- 9H hardness tempered glass LCD Protector
ELEGOO
Elegoo Mars 4 DLP
- Elegoo Mars 4 DLP Resin 3D Printer
- Build Volume 132.8x74.7x150mm³
- Printing Speed 30-70 mm/h
- Digital Light Processing System
- +20,000h Lifespan
- Internal Air Purifier
- 3.5-inch Touch Screen Controller
English
العربية
