Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Availability:
Not available
-
Categories:
Filamets
-
Categories:
Laser Engravers
-
Categories:
Resin
-
Brand:
BlueCast
-
Brand:
ELEGOO
ELEGOO
Elegoo Phecda Laser Engraver & Cutter 10W
- Elegoo Phecda Laser Engraver & Cutter 10W
- 400x400 mm Engraving Area
- Up to 25,000 mm/min Engraving Speed
- Smoke Filtering Exhaust
- Multiple Operation Methods
- Laser wavelength 455±5nm
- Maximum cuttingdepth ≤8mm Basswood Board
- Laser Spot size 0.06mm×0.06mm
- Expandable Functions Rotary Attachment, Air Assist
ELEGOO
Elegoo Phecda Laser Engraver & Cutter 20W
- Elegoo Phecda Laser Engraver & Cutter 20W
- 400x400 mm Engraving Area
- Up to 25,000 mm/min Engraving Speed
- Smoke Filtering Exhaust
- Multiple Operation Methods
- Laser wavelength 455±5nm
- Maximum cuttingdepth ≤14mm Basswood Board
- Laser Spot size 0.07x0.13mm
- Expandable Functions Rotary Attachment, Air Assist
BlueCast
BLUECAST X-ONE V2
- 0% shrinkage, perfect dimensional accuracy
- No UV post-curing required after printing
- Ultra-fast burnout: 2 hours at 700°C
- Compatible with DLP & LCD 3D printers
- Smooth surfaces and sharp engravings
- Ideal for solid rings and dense models
- Safe, odorless, low VOC resin
- Easy cleanup with ethyl alcohol
- Excellent casting with any investment
BlueCast
BlueCast X-WAX Filigree Resin
- Designed for filigree and Arabic jewelry
- Extreme printability with sharp details
- Smooth surface, minimal polishing needed
- High wax content for clean casting
- Supports LCD and DLP 3D printers
- Superior strength for thin-walled parts
- Easy support removal, no surface damage
- Fast printing vs traditional wax printers
- UV post-curing enhances model durability
- Works with standard burnout cycles
ELEGOO
ELEGOO PLA Filament
- ELEGOO PLA Filament
- Density 1.20g/cm³
- Charpy impact 5.4kj/m²
- Termal Deformation Temp 53°C
- Prop Extruder Temp 190~220°C
- Prop Bed Temp 50-65°C
- Priting Speed 30-70mm/s
- Elongation at Break 11.2%
- Tensile Strength 50MPa
BlueCast
BLUECAST X-WAX Resin
- Contains 80% real wax for clean burnout
- No UV post-curing needed after print
- Extreme castability for metal jewelry
- Perfect for solid rings and thick parts
- Prints on LCD and DLP printers
- Fast printing up to 5× wax printers
- Leaves zero ash after burnout
- Works with low-cost 3D printers
- Supports standard burnout cycles
- Environmentally friendly formulation
ELEGOO
ELEGOO PLA Special Colored
- ELEGOO PLA Special Colored
- Density 1.20g/cm³
- Charpy impact 5.4kj/m²
- Termal Deformation Temp 53°C
- Prop Extruder Temp 190~220°C
- Prop Bed Temp 50-65°C
- Priting Speed 30-70mm/s
- Elongation at Break 11.2%
- Tensile Strength 50MPa
ELEGOO
ELEGOO Silk PLA
- ELEGOO ELEGOO Silk PLA
- Density 1.20g/cm³
- Charpy impact 5.4kj/m²
- Termal Deformation Temp 53°C
- Prop Extruder Temp 190~220°C
- Prop Bed Temp 50-65°C
- Priting Speed 30-70mm/s
- Elongation at Break 11.2%
- Tensile Strength 50MPa
English
العربية
