Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Categories:
3D Scanner Accs
-
Categories:
Resin
-
Brand:
ANYCUBIC
-
Brand:
BlueCast
-
Brand:
CREALITY
ANYCUBIC
Anycubic Water-Wash Resin+
- Water Washable & Slight Odor
- Low Viscosity for Fast Printing
- High Precision with Low Shrinkage
- Density 1.2 g/cm3
- Viscosity 150~250 mPa
- Hardness 80Shore D
- Tensile Strength 30-45MPa
ANYCUBIC
Anycubic ABS-Like Resin V2
- Anycubic ABS-Like Resin V2
- Water-Washable
- Excellent Toughness
- Durability and Well-Performance
- High Precision Minimal Shrinkage
ANYCUBIC
Anycubic Standard Resin V2
- Anycubic Standard Resin V2
- Superior Strength and Durability
- Elongation at break 25-30%
- Density 1.05-1.25g/cm³
- Viscosity 250-350 cP·mPa·s
- Hardness 80-83D
- Flexural modulus 1500-2100 MPa
- Resin wash Alcohol
- Exceptional Precision with Minimal Distortion
- High Impact Resistance and Broad Compatibility
ANYCUBIC
Anycubic Tough Resin 2.0
- Anycubic Tough Resin 2.0
- Density 1.10-1.15g/cm³
- Elongation at break 30-50%
- Hardness 76 Shore D
- Viscosity 150-250MPa·s（25℃）
- Heat deflection temp>60-65℃
- Exceptional Toughness & Resistant to Breakage
- Strong Elongation & High Flexibility
- High Precision, Minimal Shrinkage
ANYCUBIC
Anycubic Tough Resin Ultra
- Anycubic Tough Resin Ultra
- Density 1.05-1.25g/cm³
- Elongation at break 70-80%
- Flexural strength 15-25 MPa
- Hardness 71-75D
- Strong lmpact Resistance
- Flexible with Excellent Rebound
ANYCUBIC
Anycubic High Clear Resin
- Anycubic High Clear Resin
- Density 1.05-1.25g/cm³
- Elongation at break 14.6%
- Hardness 78D
- Tensile strength 28.1 MPa
- Molding shrinkage 3.72-4.24%
- Prevents Yellowing
- Durable and Robust
- Mild Scent and Safe
CREALITY
Creality Scan Bridge
- Creality Scan Bridge
- Large Capacity & Fast Charging
- WiFi 6 AX6000 Fast Data Transmission
- Wireless Screen Mirroring
- Magnetic Quick Setup
- Intelligent Power-saving
BlueCast
BLUECAST X-ONE V2
- 0% shrinkage, perfect dimensional accuracy
- No UV post-curing required after printing
- Ultra-fast burnout: 2 hours at 700°C
- Compatible with DLP & LCD 3D printers
- Smooth surfaces and sharp engravings
- Ideal for solid rings and dense models
- Safe, odorless, low VOC resin
- Easy cleanup with ethyl alcohol
- Excellent casting with any investment
BlueCast
BlueCast X-WAX Filigree Resin
- Designed for filigree and Arabic jewelry
- Extreme printability with sharp details
- Smooth surface, minimal polishing needed
- High wax content for clean casting
- Supports LCD and DLP 3D printers
- Superior strength for thin-walled parts
- Easy support removal, no surface damage
- Fast printing vs traditional wax printers
- UV post-curing enhances model durability
- Works with standard burnout cycles
BlueCast
BLUECAST X-WAX Resin
- Contains 80% real wax for clean burnout
- No UV post-curing needed after print
- Extreme castability for metal jewelry
- Perfect for solid rings and thick parts
- Prints on LCD and DLP printers
- Fast printing up to 5× wax printers
- Leaves zero ash after burnout
- Works with low-cost 3D printers
- Supports standard burnout cycles
- Environmentally friendly formulation
English
العربية
