Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Categories:
3D Printer
-
Categories:
3D Scanner Accs
ELEGOO
ELEGOO Centauri Carbon 2
- 4-Color Printing Module for multi-color models
- RFID auto filament detection and syncing
- Upgraded chamber camera with Wi-Fi monitoring
- CoreXY motion system with 500 mm/s speed
- 20,000 mm/s² high-acceleration printing
- 256×256×256 mm build volume capacity
- Hardened brass-steel nozzle for CF materials
- 320°C nozzle for engineering filaments
- 110°C heated bed for strong first layers
- Supports CF, GF, ABS, PC, PA, ASA, PETG
- Triple Z-screws with linear guide rods
- 121-point auto leveling precision
- Dual-sided PEI flexible build plate
- Silent Drive motors for low noise
- Full-Auto Calibration for easy setup
SHINING 3D
Shining 3D EinScan Industrial Pack
- Shining 3D EinScan Industrial Pack
- Electronic Turntable With Special Markers
- Aluminum Tripod with Ballhead
- Improve 3D scan quality
- Compatible with Einscan & Einstar Series
CREALITY
Creality K2 Plus Combo
- Creality K2 Plus Combo 3D Printer
- Multi Filament 3D Printing With CFS
- Apus Direct Drive Extruder
- Build Volume 350x350x350mm
- Printing Speed Up to 600mm/s
- Max Nozzle Temp 350°C
- Max Bed Temp 120°C
- Ai Pritning Control System
- Fully Automatic Leveling
- Actively heated chamber
- Conectivity RJ45 ethernet, Wifi
CREALITY
Creality K2 PRO Combo 3D Printer
- 300×300×300 mm large build volume
- CFS for up to 4-color multi-material printing
- Active air chamber heating system
- Expandable to 16 colors with 4 CFS units
- Equipped with a heated print chamber
- 32GB EMMC File Storage
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy controla
CREALITY
Creality K2 Combo 3D Printer
- 260×260×260 mm large build volume
- CFS for up to 4-color multi-material printing
- Expandable to 16 colors with 4 CFS units
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
CREALITY
Creality K2 Standard 3D Printer
- 260×260×260 mm large build volume
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
CREALITY
Creality K2 PRO Standard 3D Printer
- 300×300×300 mm large build volume
- Equipped with a heated print chamber
- 32GB EMMC File Storage
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
FLASHFORGE
Flashforge AD5X Color 3D Printer
- True 4-color intelligent printing
- Max speed up to 600 mm/s
- Acceleration up to 20000 mm/s²
- Auto filament switching system
- 99% power-loss recovery
- Quick-release nozzle design
- Nozzle options: 0.25–0.8 mm
- Core XY stable motion system
- Multi-material compatibility
- 4.3-inch full touch display
- Build volume 220×220×220 mm
- Max bed temp up to 110°C
- WIFI, Ethernet, USB connectivity
- Supports Prusa/Cura/Orca slicers
- Compact 363×363×413 mm body
SHINING 3D
Shining 3D EinScan Pro Transport Case
- Shining 3D EinScan Pro Transport Case
- Protenct against of Shock and Dust
- Compatinble With Einscan Pro HD & Pro 2X
- With Carry On Handle
- Support Security Locks
CREALITY
Creality Hi Combo
- Creality Hi Combo 3D Printer
- Support Multicolor 3D Printing
- Build Volume 260×260×300mm
- Printing Speed up to 500mm/s
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
- Full-auto leveling
- 3.2" color touch screen
- Built-in Sensor to Read Filament Info
- All-metal Body
- Monitoring Camera with a Privacy Cap
CREALITY
CREALITY SPARKX i7 COMBO
- CREALITY SPARKX i7 COMBO
- Build Volume: 260×260×255 mm
- Max Speed: ≤500 mm/s
- Acceleration: ≤10000 mm/s²
- Extruder: Direct Drive
- Nozzle System: Quick-Swap Hotend
- Supported Nozzles: 0.2 / 0.4 / 0.6 / 0.8 mm
- Input Shaping + Pressure Advance
- AI Camera: 720p with Smart Detection
- Auto Leveling and Z-Offset Calibration
- Print Surface: Dual-sided PEI Plate
- Compatible Materials: PLA, PETG, TPU, PLA-CF
- Connectivity: Wi-Fi, USB Drive, RS-485
- Storage: 8G EMMC + Creality OS
- CFS Lite / CFS Mini Multicolor Support
ANYCUBIC
Anycubic Kobra X Color 3D Printer
- Native 4-Color Printing System
- 260×260×260 mm³ Build Volume
- Expandable Up to 19 Colors
- ACE GEN 2 Multicolor Technology
- 81.25% Less Filament Change Waste
- 300 mm/s Default Print Speed
- 600 mm/s Maximum Print Speed
- 20,000 mm/s² Max Acceleration
- LeviQ 3.0 49-Point Auto-Leveling
- Direct Drive Extruder System
- Supports PLA, PETG, TPU, ASA
- AI Spaghetti & Object Detection
- 720P Camera for Live Monitoring
- Ultra-Quiet Operation ≤48 dB
ANYCUBIC
Anycubic Kobra 3 Max
- Anycubic Kobra 3 MAX
- With Multi Filament 3D Priting Anycubic Ace Pro
- Max Print Volume 425*425*500mm
- Max Priting Speed 600mm/s
- Max Nozzle Temp 300℃
- Max Bed Temp 110℃
- Vibration Compensation System
AESUB
AESUB BLUE 3D Scanning Spray
- AESUB BLUE 3D Scanning Spray
- Layer thickness: 8-15 μm
- Vanishing Scanningspray
- 100% Scanable
- White coating
- Scanning time: approx. 1-2 h
- Sublimation time: approx. 4 h
- Developed and approved by scanning experts
CREALITY
Creality Ender-5 Max Full Kit
- Creality Ender-5 Max Full Kit
- With Encloser Box
- Enormous 400×400×400mm Build volume
- Ultra Fast Printing 700 mm/s
- die-cast aluminum alloy frame
- 36-point auto leveling
- Printing Accuracy 100±0.1 mm
- Layer Height 0.05-0.3 mm
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
AESUB
AESUB Orange 3D Scanning Spray
- AESUB Orange 3D Scanning Spray
- Layer thickness: 2-6 μm
- Scanning time: approx. 4-8 h
- Sublimation time: approx. 12-24 h
- White coating
- No cleaning required
- Thin and homogeneous coating
- Developed and approved by scanning experts
CREALITY
Creality Ender-5 Max
- Creality Ender-5 Max 3D Printer
- Enormous 400×400×400mm Build volume
- Ultra Fast Printing 700 mm/s
- die-cast aluminum alloy frame
- 36-point auto leveling
- Printing Accuracy 100±0.1 mm
- Layer Height 0.05-0.3 mm
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
AESUB
AESUB Transparent 3D Scanning Spray
- AESUB Transparent 3D Scanning Spray
- Layer thickness: 15-20 μm
- Scanning time: approx. 1-2 h
- Sublimation time: approx. 4 h
- Eliminates reflections without loss of colour information
- Thin and homogeneous coating
- Transparent vanishing dulling spray
AESUB
AESUB Diamond 3D Scanning Spray
- AESUB Diamond 3D Scanning Spray
- Layer thickness: 2 μm
- Sublimation time: approx. 15-30 min
- Scanning time: approx. 10 min
- Disappearing state-of the-art scanning spray for the jewellery
- Thin & homogenous white coating
- Free of pigments – free of titanium dioxide
- Developed & approved by scanning experts
CREALITY
Creality Ender-3 V3 Plus
- Creality Ender-3 V3 Plus 3D Printer
- Max Printing Volume 300*300*300mm
- Max Printing Speed 600mm/s
- Max Extruder Temp 300°C
- Max Bed Temp 100°C
- Fully Automatic Bed Leveling
- 4.3Inch Touch Screen Controller
- Tough Aerospace Aluminum Alloy
- Quick-swap Nozzle
- Two Powerful Motors on Y-axis
- Automated XZ Belt Tensioning
- Printing Accuracy ±0.2mm
CREALITY
Creality HALOT X1 Resin 3D Printer
- Creality HALOT X1 16K
- 10.1-inch advanced monochrome LCD screen
- Pixel size 14 × 19 µm for extreme accuracy
- True leveling-free printing system built-in
- Fast printing speed up to 170 mm per hour
- One-second quick-release build plate design
- Quick-release resin vat for easy handling
- 92-zone intelligent exposure for clarity
- Stable top-down motion with dual rails
- Z-axis accuracy up to 0.01 mm guaranteed
- Smart AFU resin management system built-in
- Supports versatile 405 nm UV printing resin
- Easy file transfer via USB and WiFi options
- 3.98-inch capacitive touchscreen interface
- 3DRAYAN.COM official Piocreat dealer in UAE
CREALITY
Creality Hi 3D Printer
- Creality Hi 3D Printer
- Build Volume 260×260×300mm
- Printing Speed up to 500mm/s
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
- Full-auto leveling
- 3.2" color touch screen
- Built-in Sensor to Read Filament Info
- All-metal Body
- Monitoring Camera with a Privacy Cap
ANYCUBIC
Anycubic Photon P1 MAX
- 14-inch 12K LCD for ultra-fine details
- 24.8 μm XY resolution for precision prints
- Large build size: 285.5 × 214 × 300 mm
- Massive 18.3L printing volume
- Advanced COB + Fresnel light source
- LightTurbo 4.0 uniform light technology
- Intelligent Auto-Leveling 3.0 system
- Precision C7-grade ball screw Z-axis
- Remote control via App & camera monitoring
- Large 1900 ml resin vat capacity
Revopoint
Revopoint Dual-axis Turntable
- Revopoint Dual-axis Turntable
- Compatible With Revopoint 3D Scanners
- Capture More Data in 1 Rotation
- No Need to Adjust the Object’s Position
- Tilt Adjustable Speed
- 360° Adjustable Rotation
- Max Load 5 kg
- Rotation Control Via App and Manual
- Turntable Speed 18 - 90 Seconds per Rotation
ANYCUBIC
Anycubic Photon P1 Resin 3D Printer
- Industrial-grade ball screw for ultra-stable motion
- Supports high-viscosity resins up to 8000 cps
- Wave Release tech reduces peel force by 60%
- Precision-milled steel build plate <80 microns
- LCD alignment accuracy below 70 microns
- LighTurbo 4.0 with <2° light collimation
- Over 92% full-screen light uniformity
- Dual-material printing with optional kit
- Resin temperature control up to 40°C
- Intelligent Leveling System 3.0
- Dynamic Release System 3.0
- Light-Off Compensation 3.0
- NFEP film for smooth, consistent curing
- Remote monitoring via built-in camera
- One-click slicing in Photon Workshop 4.0
HeyGears
HeyGears Reflex 2 3D Printer
- 161 OptiZone Light Engine for precision
- 10.7-inch 6K Amber Pro screen upgrade
- Screen lifespan exceeds 6 000 hours
- AI light calibration across 86 000 zones
- C5 grade Z-axis ± 2 µm accuracy
- Die-cast unibody base for rigidity
- Advanced thermal cooling system
- Intelligent temperature control ± 1 °C
- High-sensitivity residue detection 0.01 N
- Auto leveling platform 0.15° deviation
- Wide compatibility with pro resins
- Modular design for easy maintenance
English
العربية
