Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Categories:
3D Printer
-
Categories:
Resin
-
Brand:
BlueCast
-
Brand:
FLASHFORGE
-
Brand:
PHROZEN
-
Brand:
Piocreat
PHROZEN
Phrozen Castable Resin W40 Orange
- Phrozen Castable Resin W40 Orange
- 40% wax content
- Low shrinkage, high precision
- No foul/strong odor
- Compatible with 405nm 3D Printers
- XY resolution：0.050 mm
PHROZEN
Phrozen Castable Resin W20 Green
- Phrozen Castable Resin W20 Green
- 20% wax content
- Low shrinkage, high precision
- No foul/strong odor
- Compatible with 405nm 3D Printers
- XY resolution：0.050 mm
PHROZEN
Phrozen Castable Jewelry 3D Printing Resin
- Phrozen Castable Jewelry 3D Printing Resin
- Surface Hardness: 76 Shore D
- Tensile Stress at Break: 25.1 MPa
- Elongation at Break, EAB: 20.63 %
- Notched Izod Impact：28.98 J/m
- Specifically designed for casting
- Low shrinkage, high precision
- No foul/strong odor
- Compatible with 405nm 3D Printers
- XY resolution：0.050 mm
PHROZEN
Phrozen RPG 3D Printing Resin
- Phrozen RPG 3D Printing Resin
- More durable and playable
- Flexible and elastic
- Print once, play more
- The look that best suits your character
- Stunning matte gray finish
PHROZEN
Phrozen Aqua Hyperfine 3D Printing Resin
- Phrozen Aqua Hyperfine 3D Printing Resin
- Phrozen RPG 3D Printing Resin
- More durable and playable
- Flexible and elastic
- Print once, play more
- The look that best suits your character
- Stunning matte gray finish
PHROZEN
Phrozen Aqua 8K 3D Printing Resin
- Phrozen Aqua 8K 3D Printing Resin
- Specifically formulated to showcase super-fine detail
- Easy to print and are easily post-processed
- Low Shrinkage & High Precision
- Low Viscosity & Low Odor
PHROZEN
Phrozen Aqua 4K 3D Printing Resin
- Phrozen Aqua 4K 3D Printing Resin
- Developed for low shrinkage and high precision
- Easy to print and are easily post-processed
- Formulated to print with the highest resolution
PHROZEN
Phrozen Aqua 3D Printing Resin
- Phrozen Aqua 3D Printing Resin
- Good printing performance
- Print even thin objects with ease
- Moderate viscosity and low odor
- Density: 1.05 - 1.25 g/cm3
- Viscosity: 250 - 400 cP
- Surface Hardness: 70 Shore D
- Tensile Strength at Break: 17.6 MPa
PHROZEN
Phrozen EL400 Elastomer 3D Printing Resin
- Phrozen EL400 Elastomer 3D Printing Resin
- Printing flexible and durable models
- Compatible With all Kind of Resin 3D Printers
- High Precision Printing
- Easy post Productions
- Fast Printing Speed
PHROZEN
Phrozen Speed Plus 3D Printing Resin
- Phrozen Speed Plus 3D Printing Resin
- Faster 3D Printing
- Short exposure time
- Suitable for large-format models
- Compatible with ACF & PFA Release Films
- High Details and accuracy
- Hardness 85–88D
- Tensile modulus 2414 MPa
- Viscosity 150–250 cP at 25 °C
- longation at break 5.7%
PHROZEN
Phrozen Speed 3D Printing Resin
- Phrozen Speed 3D Printing Resin
- Up to 8x faster 3D Printing
- Print Huge Models Within 6 Hours
- Compatible With Various LCD 3D Printers
BlueCast
BLUECAST X-ONE V2
- 0% shrinkage, perfect dimensional accuracy
- No UV post-curing required after printing
- Ultra-fast burnout: 2 hours at 700°C
- Compatible with DLP & LCD 3D printers
- Smooth surfaces and sharp engravings
- Ideal for solid rings and dense models
- Safe, odorless, low VOC resin
- Easy cleanup with ethyl alcohol
- Excellent casting with any investment
BlueCast
BlueCast X-WAX Filigree Resin
- Designed for filigree and Arabic jewelry
- Extreme printability with sharp details
- Smooth surface, minimal polishing needed
- High wax content for clean casting
- Supports LCD and DLP 3D printers
- Superior strength for thin-walled parts
- Easy support removal, no surface damage
- Fast printing vs traditional wax printers
- UV post-curing enhances model durability
- Works with standard burnout cycles
BlueCast
BLUECAST X-WAX Resin
- Contains 80% real wax for clean burnout
- No UV post-curing needed after print
- Extreme castability for metal jewelry
- Perfect for solid rings and thick parts
- Prints on LCD and DLP printers
- Fast printing up to 5× wax printers
- Leaves zero ash after burnout
- Works with low-cost 3D printers
- Supports standard burnout cycles
- Environmentally friendly formulation
PHROZEN
Phrozen Sonic Mighty Revo
- 10.1-inch 14K mono LCD
- Build Volume of 22.3x12.6x23.5cm
- ACF Release Film
- Print Speed Up to 450Layers/h
- XY Resolution of 16.8x24µm
- High Speed WiFi Connection
- 5.0-inch Capacitive Touch Screen Controller
- 8GB Internal Storage
PHROZEN
Phrozen Sonic Mega 8K S
- Phrozen Sonic Mega 8K S
- 15" 8K Mono LCD
- Print Volume: 33x18.5x30cm
- Light Source : 405nm ParaLED Matrix 2.0
- Control Panel 3.5" in Large Touch Panel
- XY Resolution 43 µm
- Layer Thickness 0.01-0.30 mm
- Printing Speed 600 layers/hr
- Release Film ACF Film
- Seamless Integration With Pump & Fill
FLASHFORGE
Flashforge Adventurer 5M PRO
- Flashforge Adventurer 5M PRO 3D Printer
- Printing Dimension 220*220*220mm
- Printing Speed 600mm/s
- Layer Thickness 0.1-0.4mm
- Max Extruder Temperature 280°C
- Max Platform Temperature 110°C
- Printing Precision ±0.1 mm
- 4.3 inch Touch LCD Screen Controller
- Full auto one click leveling
FLASHFORGE
FlashForge Creator 3 Pro
- FlashForge Creator 3 Pro Dual Extruder 3D Printer
- Build Volume 300x250x200mm
- Print Speed 10-150mm/s
- Max Extruder Temperature 320℃
- Max Bed Temperature 120℃
- 4.3-inch Touch Screen Controller
- Independent Dual Extruders
PHROZEN
Phrozen Sonic Mini 8K S
- Phrozen Sonic Mini 8K S Resin 3D Printer
- 7.1 inch mono LCD
- XY resolution 22 μm
- Build Volume 165x72x170
- Printing Speed 80mm/h
- Layer Thickness 0.01-0.30mm
- 3.5" Touch Controller
- Light Source linear projection
PHROZEN
Phrozen Sonic Mighty 12K
- Phrozen Sonic Mighty 12K
- 10.1 inch 12K mono LCD
- Build Volume 218x123x235mm
- XY Resolution of 19x24μm
- Printing Speed 400 layers/hr
- 5 inch touchscreen Controller
- Release Film nFEP Film
- Light Source Linear ProjectionLED
- Laser cut build Plate
FLASHFORGE
FlashForge Adventurer 5M
- FlashForge Adventurer 5M 3D Printer
- Build Volume 220*220*220mm
- Printing Speed 600mm/s
- Max Extruder Temp 280℃
- Max Bed Temp 110 ℃
- Layer Thickness 0.1-0.4 mm
- Print Precision ±0.2 mm
PHROZEN
Phrozen Sonic Mega 8K V2
- Phrozen Sonic Mega 8K V2 Resin 3D Printer
- Printing Volume 33x18.5x40cm
- Printer Speed 400 layer/hr
- Automated Resin Feeder
- Two plug-in air purifiers
- 15" 8K Monochrome LCD
- XY resolution 43µm
English
العربية
