Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Categories:
3D Printer
-
Categories:
Resin
-
Brand:
BAMBU LAB
-
Brand:
BlueCast
-
Brand:
Jamg HE
![]()
BAMBU LAB
Bambu Lab H2D AMS Combo 3D Printer
- Dual-nozzle system for multi-material & multi-color printing
- Maximum print speed up to 600mm/s
- Massive build volume: 350×320×325 mm³
- High-temperature all-metal hotend: up to 350°C
- 65°C actively heated chamber for warp-free printing
- Supports over 20 materials: PLA, ABS, PETG, TPU, PC, PA
- REAL High-Flow Hotend: up to 65mm³/s flow rate
- Intelligent DynaSense Extruder with closed-loop servo control
- Automatic multi-color and multi-filament printing
- Supports up to 16 filaments
- 15-point filament monitoring system for feeding, tip location, tension & flow
- AI and Smart Features
- AI-powered pre-flight checklist
- Built-in cameras: BirdsEye, Nozzle, Toolhead
- Auto bed leveling and Z-offset calibration
- Real-time error detection (clogs, tangles, under-extrusion)
- Power loss recovery & filament runout detection
- Compatible with optional 10W / 40W laser modules
- Compatible with digital cutting blade module
- Compatible with pen plotter tool for writing/drawing
- Quick-swap toolheads with automatic recognition
- Laser Power: 10W or 40W (455nm)
- Engraving area: up to 310×270 mm
- Engraves and cuts wood, acrylic, leather, rubber, and more
- Micro Lidar for 3D mesh generation and Z-height sensing
- Built-in air assist, flame detection, and safety systems
- Digital Cutting & Drawing
- Cutting area: 300×285 mm²
- Blade pressure: 50gf to 600gf
- Supports vinyl, paper, fabric, leather, etc.
BAMBU LAB
Bambu Lab H2S AMS Combo 3D Printer
- Large build volume 340×320×340 mm
- Multi-color printing with AMS 2 Pro
- Supports up to 24 colors & materials
- Optical calibration at 5μm accuracy
- All-metal nozzle with 350°C heat
- Heated chamber up to 65°C
- Automatic filament drying system
- 23 smart sensors & 3 AI cameras
- Print speed up to 1000 mm/s
- Servo motor with 67% more extrusion
- Optional 10W laser cutting module
- Active vibration compensation system
- Sturdy, integrated metal body design
- Ultra-quiet operation under 50 dB
BAMBU LAB
Bambu Lab A1 Combo
- Bambu Lab A1 Combo 3D printer
- Multi-Color Printing With AMS
- Build Volume:256*256*256 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 100℃
- built-in Monitoring camera
Jamg HE
JAMG HE Water Washable ABS Like Resin
- JAMG HE Water Washable ABS Like Resin
- Fast Curing
- Good Process Performance
- Low Viscosity
- Advantage of improved formulation
- Low Odour And Easy to Clean
Jamg HE
JAMG HE Gingiva Mask Resin
- JAMG HE Gingiva Mask Resin
- Available in Two Colors
- High Tensile Strength
- Low Odor & Non-Toxic
- Flexibility & Elasticity
- Compatibility with LCD & DLP 3D Printers
Jamg HE
JAMG HE Dental Castable Resin
- JAMG HE Dental Castable Resin
- High Accurate
- Ideal for make Crown or frame casting
- Ultra low shrinkage
- Ash free for casting
- Compatible Printer: DLP,LCD,SLA
Jamg HE
JAMG HE Ultra Cast Resin
- JAMG HE Ultra Cast Resin
- Easy printing
- 90% wax resin
- Extremely easy casting
- No casting skill required
Jamg HE
JAMG HE High Wax Plus Resin
- JAMG HE High Wax Plus Resin
- 60% wax resin
- Great performance
- Smooth surface
- Suitable for filigree and diamond jewelry casting
- Weight 1000g
Jamg HE
JAMG HE X Cast Resin
- JAMG HE X Cast Resin
- Sutible for jewelry or silver & gold casting
- High detail prints
- Easy cleaning
- Super casting
- Easy to set diamond or stone
- Weight 1000g
Jamg HE
JAMG HE 10K Low Shrinkage Nano Resin
- JAMG HE 10K Low Shrinkage Nano Resin
- Density 1.05-1.25 g/cm3
- Jewelry Silicone Rubber Mold Resin
- Flexural modulus 1.882-2.385Mpa
- Flexural strength 59-70MPa
- Thermal expansion 95*E-6
- Tensile modulus 1.779-2.385 MPa
BAMBU LAB
Bambu Lab X1-Carbon Combo
- Bambu Lab X1 Carbon COMBO 3D printer
- Equipped with the AMS System
- Build Volume:256×256×256mm
- High quality printing with 7 μm Lidar Resolution
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab A1 mini
- Bambu Lab A1 mini 3D printer
- Build Volume:180*180*180 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 80℃
- built-in Monitoring camera
BlueCast
BLUECAST X-ONE V2
- 0% shrinkage, perfect dimensional accuracy
- No UV post-curing required after printing
- Ultra-fast burnout: 2 hours at 700°C
- Compatible with DLP & LCD 3D printers
- Smooth surfaces and sharp engravings
- Ideal for solid rings and dense models
- Safe, odorless, low VOC resin
- Easy cleanup with ethyl alcohol
- Excellent casting with any investment
BAMBU LAB
Bambu Lab P1P
- Bambu Lab P1P 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BlueCast
BlueCast X-WAX Filigree Resin
- Designed for filigree and Arabic jewelry
- Extreme printability with sharp details
- Smooth surface, minimal polishing needed
- High wax content for clean casting
- Supports LCD and DLP 3D printers
- Superior strength for thin-walled parts
- Easy support removal, no surface damage
- Fast printing vs traditional wax printers
- UV post-curing enhances model durability
- Works with standard burnout cycles
BAMBU LAB
Bambu Lab P1S Combo
- Bambu Lab P1S 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- Enclosed-body for high-temperature filament printing
- Up to 16-color printing with AMS
- built-in chamber camera
BlueCast
BLUECAST X-WAX Resin
- Contains 80% real wax for clean burnout
- No UV post-curing needed after print
- Extreme castability for metal jewelry
- Perfect for solid rings and thick parts
- Prints on LCD and DLP printers
- Fast printing up to 5× wax printers
- Leaves zero ash after burnout
- Works with low-cost 3D printers
- Supports standard burnout cycles
- Environmentally friendly formulation
BAMBU LAB
Bambu Lab P1S
- Bambu Lab P1S 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab X1-Carbon
- Bambu Lab X1 Carbon 3D printer
- Build Volume:256×256×256mm
- High quality printing with 7 μm Lidar Resolution
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab X1E
- Bambu Lab X1E 3D printer
- Build Volume:256×256×256mm
- High quality printing with 7 μm Lidar Resolution
- Max Speed : 500mm/s
- Max Hot End Temperature : 320 ℃
- Chamber Control Temperature 60℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab A1 mini Combo
- Bambu Lab A1 mini Combo 3D printer
- Equipped with AMS system
- Build Volume:180*180*180 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 80℃
- built-in Monitoring camera
BAMBU LAB
Bambu Lab H2D 3D Printer
- Bambu Lab H2D 3D Printer
- Dual-nozzle printing
- 350×320×325 mm³ print volume
- 350°C nozzle & 65°C chamber heat
- Optional 10W/40W laser module
- Digital cutter and pen support
- 600 mm/s high-speed printing
- AI-powered nozzle and top cameras
- 5μm optical motion calibration
- Servo-controlled DynaSense extruder
- Auto pre-flight check and alignment
BAMBU LAB
Bambu H2D Laser Full Combo
- Bambu H2D Laser Full Combo
- Optional 10W/40W Laser and Cutting Module
- Multi-material 3D Printing
- Dual-nozzle printing
- 350×320×325 mm³ print volume
- 350°C nozzle & 65°C chamber heat
- Optional 10W/40W laser module
- Digital cutter and pen support
- 600 mm/s high-speed printing
- AI-powered nozzle and top cameras
- 5μm optical motion calibration
- Servo-controlled DynaSense extruder
- Auto pre-flight check and alignment
English
العربية
