• Creality K2 Plus Combo 3D Printer
• Multi Filament 3D Printing With CFS
•  Apus Direct Drive Extruder​
• Build Volume 350x350x350mm
• Printing Speed Up to 600mm/s
• Max Nozzle Temp 350°C
• Max Bed Temp 120°C
• Ai Pritning Control System
• Fully Automatic Leveling
• Actively heated chamber
• Conectivity RJ45 ethernet, Wifi

• 300×300×300 mm large build volume
• CFS for up to 4-color multi-material printing
• Active air chamber heating system
• Expandable to 16 colors with 4 CFS units
• Equipped with a heated print chamber
• 32GB EMMC File Storage
• Max nozzle temp 300°C for advanced filaments
• Hardened steel nozzle, 40 mm³/s flow rate
• Speeds up to 600 mm/s, 20,000 mm/s² accel
• Intelligent auto bed leveling system
• Dual AI cameras for live monitoring
• Steel linear rail for smooth, durable motion
• 4-inch color touchscreen for easy controla

• 260×260×260 mm large build volume
• CFS for up to 4-color multi-material printing
• Expandable to 16 colors with 4 CFS units
• Max nozzle temp 300°C for advanced filaments
• Hardened steel nozzle, 40 mm³/s flow rate
• Speeds up to 600 mm/s, 20,000 mm/s² accel
• Intelligent auto bed leveling system
• Dual AI cameras for live monitoring
• Steel linear rail for smooth, durable motion
• 4-inch color touchscreen for easy control

• 260×260×260 mm large build volume
• Max nozzle temp 300°C for advanced filaments
• Hardened steel nozzle, 40 mm³/s flow rate
• Speeds up to 600 mm/s, 20,000 mm/s² accel
• Intelligent auto bed leveling system
• Dual AI cameras for live monitoring
• Steel linear rail for smooth, durable motion
• 4-inch color touchscreen for easy control

• 300×300×300 mm large build volume
• Equipped with a heated print chamber
• 32GB EMMC File Storage
• Max nozzle temp 300°C for advanced filaments
• Hardened steel nozzle, 40 mm³/s flow rate
• Speeds up to 600 mm/s, 20,000 mm/s² accel
• Intelligent auto bed leveling system
• Dual AI cameras for live monitoring
• Steel linear rail for smooth, durable motion
• 4-inch color touchscreen for easy control

• Quad independent toolheads (4 nozzles)
• Up to 500% faster printing speed
• Max travel speed: 600 mm/s
• Acceleration up to 30,000 mm/s²
• Near-zero purge waste technology
• FlashSwap multi-nozzle system
• Build volume: 256 × 256 × 256 mm
• Max nozzle temp: 320°C
• Heated bed up to 120°C
• Multi-material & multi-color printing
• Auto leveling & flow calibration
• Full HD camera for monitoring
• WiFi, LAN & USB connectivity
• PEI flexible steel build plate
• Supports engineering-grade filaments

• True 4-color intelligent printing
• Max speed up to 600 mm/s
• Acceleration up to 20000 mm/s²
• Auto filament switching system
• 99% power-loss recovery
• Quick-release nozzle design
• Nozzle options: 0.25–0.8 mm
• Core XY stable motion system
• Multi-material compatibility
• 4.3-inch full touch display
• Build volume 220×220×220 mm
• Max bed temp up to 110°C
• WIFI, Ethernet, USB connectivity
• Supports Prusa/Cura/Orca slicers
• Compact 363×363×413 mm body

• Creality Hi Combo 3D Printer
• Support Multicolor 3D Printing
• Build Volume 260×260×300mm
• Printing Speed up to 500mm/s
• Max Nozzle Temperature ≤ 300 ℃
• Max Heatbed Temperature ≤ 100 ℃
• Full-auto leveling
• 3.2" color touch screen
• Built-in Sensor to Read Filament Info
• All-metal Body
• Monitoring Camera with a Privacy Cap

• CREALITY SPARKX i7 COMBO
• Build Volume: 260×260×255 mm
• Max Speed: ≤500 mm/s
• Acceleration: ≤10000 mm/s²
• Extruder: Direct Drive
• Nozzle System: Quick-Swap Hotend
• Supported Nozzles: 0.2 / 0.4 / 0.6 / 0.8 mm
• Input Shaping + Pressure Advance
• AI Camera: 720p with Smart Detection
• Auto Leveling and Z-Offset Calibration
• Print Surface: Dual-sided PEI Plate
• Compatible Materials: PLA, PETG, TPU, PLA-CF
• Connectivity: Wi-Fi, USB Drive, RS-485
• Storage: 8G EMMC + Creality OS
• CFS Lite / CFS Mini Multicolor Support

• Native 4-Color Printing System
• 260×260×260 mm³ Build Volume
• Expandable Up to 19 Colors
• ACE GEN 2 Multicolor Technology
• 81.25% Less Filament Change Waste
• 300 mm/s Default Print Speed
• 600 mm/s Maximum Print Speed
• 20,000 mm/s² Max Acceleration
• LeviQ 3.0 49-Point Auto-Leveling
• Direct Drive Extruder System
• Supports PLA, PETG, TPU, ASA
• AI Spaghetti & Object Detection
• 720P Camera for Live Monitoring
• Ultra-Quiet Operation ≤48 dB

• Anycubic Kobra 3 MAX
• With Multi Filament 3D Priting Anycubic Ace Pro
• Max Print Volume 425*425*500mm
• Max Priting Speed 600mm/s
• Max Nozzle Temp 300℃
• Max Bed Temp 110℃
• Vibration Compensation System

• Creality Ender-5 Max Full Kit
• With Encloser Box
• Enormous 400×400×400mm Build volume
• Ultra Fast Printing 700 mm/s
• die-cast aluminum alloy frame
• 36-point auto leveling
• Printing Accuracy 100±0.1 mm
• Layer Height 0.05-0.3 mm
• Max Nozzle Temperature ≤ 300 ℃
• Max Heatbed Temperature ≤ 100 ℃

• Creality Ender-5 Max 3D Printer
• Enormous 400×400×400mm Build volume
• Ultra Fast Printing 700 mm/s
• die-cast aluminum alloy frame
• 36-point auto leveling
• Printing Accuracy 100±0.1 mm
• Layer Height 0.05-0.3 mm
• Max Nozzle Temperature ≤ 300 ℃
• Max Heatbed Temperature ≤ 100 ℃

• Creality Ender-3 V3 Plus 3D Printer
• Max Printing Volume 300*300*300mm
• Max Printing Speed 600mm/s
• Max Extruder Temp 300°C
• Max Bed Temp 100°C
• Fully Automatic Bed Leveling
• 4.3Inch Touch Screen Controller
• Tough Aerospace Aluminum Alloy
• Quick-swap Nozzle
• Two Powerful Motors on Y-axis
• Automated XZ Belt Tensioning
• Printing Accuracy ±0.2mm

• Creality HALOT X1 16K
• 10.1-inch advanced monochrome LCD screen
• Pixel size 14 × 19 µm for extreme accuracy
• True leveling-free printing system built-in
• Fast printing speed up to 170 mm per hour
• One-second quick-release build plate design
• Quick-release resin vat for easy handling
• 92-zone intelligent exposure for clarity
• Stable top-down motion with dual rails
• Z-axis accuracy up to 0.01 mm guaranteed
• Smart AFU resin management system built-in
• Supports versatile 405 nm UV printing resin
• Easy file transfer via USB and WiFi options
• 3.98-inch capacitive touchscreen interface
• 3DRAYAN.COM official Piocreat dealer in UAE

• Creality Hi 3D Printer
• Build Volume 260×260×300mm
• Printing Speed up to 500mm/s
• Max Nozzle Temperature ≤ 300 ℃
• Max Heatbed Temperature ≤ 100 ℃
• Full-auto leveling
• 3.2" color touch screen
• Built-in Sensor to Read Filament Info
• All-metal Body
• Monitoring Camera with a Privacy Cap

• 14-inch 12K LCD for ultra-fine details
• 24.8 μm XY resolution for precision prints
• Large build size: 285.5 × 214 × 300 mm
• Massive 18.3L printing volume
• Advanced COB + Fresnel light source
• LightTurbo 4.0 uniform light technology
• Intelligent Auto-Leveling 3.0 system
• Precision C7-grade ball screw Z-axis
• Remote control via App & camera monitoring
• Large 1900 ml resin vat capacity

• Industrial-grade ball screw for ultra-stable motion
• Supports high-viscosity resins up to 8000 cps
• Wave Release tech reduces peel force by 60%
• Precision-milled steel build plate <80 microns
• LCD alignment accuracy below 70 microns
• LighTurbo 4.0 with <2° light collimation
• Over 92% full-screen light uniformity
• Dual-material printing with optional kit
• Resin temperature control up to 40°C
• Intelligent Leveling System 3.0
• Dynamic Release System 3.0
• Light-Off Compensation 3.0
• NFEP film for smooth, consistent curing
• Remote monitoring via built-in camera
• One-click slicing in Photon Workshop 4.0

• 161 OptiZone Light Engine for precision
• 10.7-inch 6K Amber Pro screen upgrade
• Screen lifespan exceeds 6 000 hours
• AI light calibration across 86 000 zones
• C5 grade Z-axis ± 2 µm accuracy
• Die-cast unibody base for rigidity
• Advanced thermal cooling system
• Intelligent temperature control ± 1 °C
• High-sensitivity residue detection 0.01 N
• Auto leveling platform 0.15° deviation
• Wide compatibility with pro resins
• Modular design for easy maintenance

• 230×144×350 mm Build Volume
• 2.3× Larger Print Capacity
• 1032-Zone OptiZone Light Engine
• 86,000+ AI Light Calibration Zones
• Amber Screen Pro with 6000h Lifespan
• C5 Grade Precision Z-Axis Module
• Intelligent ±1°C Temperature Control
• Auto Resin Refill with Ultrasonic Sensor
• Floating Build Platform Auto-Leveling
• Die-Cast Unibody Aluminum Frame
• 0.15 mm Residue Detection Sensor
• Supports High-Viscosity Resins
• 25,600 Microstep FOC Motor Control
• Available at 3DRAYAN.COM UAE

• Anycubic Photon Mono M7 Pro
• Max Printing Speed 170mm/h
• 10.1'', 14K Mono LCD
• Resolution 13320 * 5120 
• 5" IPS Touch Controller
• Auto Resin Refill, Withdrawal
• Auto-Adaptive Technology Control Heating
• Intelligent Workflow-Assist Printing
• Dynamic Temperature Control Resin VAT

• Fully automated 3D printing workflow
• Ultra-high precision with 33μm XY resolution
• Smart AI-assisted peeling force management
• Automatic resin level detection and refill
• Heated resin tray for stable print quality
• Powerful 385+nm UV light for faster curing
• Optimized dual curing for stronger materials
• Intelligent regional exposure technology
• Advanced Z-axis compensation for smooth surfaces
• Consistent printing performance over time
• Wide compatibility with advanced resins
• Compact design with Wi-Fi and Ethernet support

• Amber 8K Screen with 566:1 contrast ratio
• Ultra-sharp details with ±15 μm printing accuracy
• 4.5s per layer high-speed 3D printing
• Dynamic Motion Algorithm 3.0 boosts speed by 33%
• Adaptive resin optimization for 180+ process combos
• Automatic one-click pre-processing & slicing
• Real-time force monitoring with residue detection
• Heated resin tank for stable viscosity and print quality
• C5-grade Z-axis module with ≤2 μm positioning error
• WiFi & USB connectivity for seamless workflow

• AI-assisted peeling for flawless layer separation
• 33μm XY resolution with ±16μm printing accuracy
• Automatic resin refill with ±5g weight detection
• Heated resin tray maintains optimal 22°C temperature
• 90.6% detail restoration with ≤0.05mm surface tolerance
• Intelligent regional exposure for stronger structures
• Z-axis compensation reduces deformation and defects
• 385+nm UV light for 1.5× faster resin curing
• 90% uniformity across the entire build plate
• Supports advanced engineering-grade resins

• Large build volume 340×320×340 mm
• Multi-color printing with AMS 2 Pro
• Supports up to 24 colors & materials
• Optical calibration at 5μm accuracy
• All-metal nozzle with 350°C heat
• Heated chamber up to 65°C
• Automatic filament drying system
• 23 smart sensors & 3 AI cameras
• Print speed up to 1000 mm/s
• Servo motor with 67% more extrusion
• Optional 10W laser cutting module
• Active vibration compensation system
• Sturdy, integrated metal body design
• Ultra-quiet operation under 50 dB

• Dual-nozzle system for multi-material & multi-color printing
• Maximum print speed up to 600mm/s
• Massive build volume: 350×320×325 mm³
• High-temperature all-metal hotend: up to 350°C
• 65°C actively heated chamber for warp-free printing
• Supports over 20 materials: PLA, ABS, PETG, TPU, PC, PA
• REAL High-Flow Hotend: up to 65mm³/s flow rate
• Intelligent DynaSense Extruder with closed-loop servo control
• Automatic multi-color and multi-filament printing
• Supports up to 16 filaments
• 15-point filament monitoring system for feeding, tip location, tension & flow
• AI and Smart Features
• AI-powered pre-flight checklist
• Built-in cameras: BirdsEye, Nozzle, Toolhead
• Auto bed leveling and Z-offset calibration
• Real-time error detection (clogs, tangles, under-extrusion)
• Power loss recovery & filament runout detection
• Compatible with optional 10W / 40W laser modules
• Compatible with digital cutting blade module
• Compatible with pen plotter tool for writing/drawing
• Quick-swap toolheads with automatic recognition
• Laser Power: 10W or 40W (455nm)
• Engraving area: up to 310×270 mm
• Engraves and cuts wood, acrylic, leather, rubber, and more
• Micro Lidar for 3D mesh generation and Z-height sensing
• Built-in air assist, flame detection, and safety systems
• Digital Cutting & Drawing
• Cutting area: 300×285 mm²
• Blade pressure: 50gf to 600gf
• Supports vinyl, paper, fabric, leather, etc.

• Bambu Lab A1 Combo 3D printer
• Multi-Color Printing With AMS
• Build Volume:256*256*256 mm³
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 100℃
• built-in Monitoring camera

• Anycubic Kobra S1 Combo
• Print Volume 250*250*250mm
• Printing Speed up to 600mm/s
• 8 Color 3D Printing
• Ultra-Quiet Printing 33dB
• Compatible with PLA, PETG, TPU，ABS, ASA
• Nozzle temperature 320°C
• Hotbed temperature 120℃ 

• Anycubic Photon Mono M7 Max
• Resin Auto-Fill Unit
• Build Volume 298x164x300mm
• 13.6 inch monochrome 7K screen
• X/Y Axis Resolution 46*46μm
• LighTurbo 3.0 High-Precision Light Source System
• Maximum print speed op to 86mm/h
• Dynamic temperature control resin vat
• Intelligence Assisted Printing System
• Light Source COB light source+ Fresnel lens
• Light Intensity 4500±10%μW/cm²

• Creality K1C 3D Printer
• 600mm/s Printing Speed
• Versatile Ai LiDAR
• Priting Dimention : 220*220*250mm
• Maximum Hotend Temp  300℃
• Maximum HotBed Temp  100℃
• Equipted to Ai Camera
• equipped to Air Purifier

• Creality K1 Max 3D Printer
• 600mm/s Printing Speed
• Versatile Ai LiDAR
• Priting Dimention : 300*300*300mm
• Maximum Hotend Temp  300℃
• Maximum HotBed Temp  100℃
• Equipted to Ai Camera
• equipped to Air Purifier

• Creality Ender-3 V3 KE 3D Printer
• Build Volume 220*220*240mm
• Max Printing Speed 500mm/s
• Max Nozzle Temp 300
• Max Bed Temp 100
• 4.3" Color Touch Screen Controller
• Layer Thickness 0.1-0.35mm

• Massive 350×350×350 mm³ build volume
• Fully enclosed CoreXY high-speed system
• 65 °C active chamber heating control
• 350 °C hardened steel high-temp nozzle
• Supports up to 16-color multi-printing
• ACE 2 Pro automatic refill and drying
• Prints PLA, ABS, ASA, PC, PA-CF & more
• 600 mm/s max print speed, 20 000 mm/s² accel
• Pressure advance and flow calibration
• Activated-carbon air purification filter
• 4.3″ capacitive touchscreen interface
• AI spaghetti detection & object skip
• 720 p camera for live view & timelapse
• Wi-Fi 6 / LAN / USB smart connectivity
• Power-loss recovery & filament sensor

• Creality K2 Plus 3D Printer
• Build Volume 350x350x350mm
• Printing Speed Up to 600mm/s
• Max Nozzle Temp 350°C
• Max Bed Temp 120°C
• Ai Pritning Control System
• Printing Accuracy 100mm±0.1mm
• Extruder Apus dual-gear direct drive extruder
• Fully Automatic Leveling
• Actively heated chamber
• Conectivity RJ45 ethernet, Wifi

• Bambu Lab X1 Carbon COMBO 3D printer
• Equipped with the AMS System
• Build Volume:256×256×256mm
• High quality printing with 7 μm Lidar Resolution
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 110℃
• built-in chamber camera