Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Availability:
In stock
-
Availability:
Available
-
Availability:
Not available
-
Brand:
BAMBU LAB
-
Brand:
HeyGears
-
Brand:
PHROZEN
-
Brand:
SOVOL
![]()
BAMBU LAB
Bambu Lab H2D AMS Combo 3D Printer
- Dual-nozzle system for multi-material & multi-color printing
- Maximum print speed up to 600mm/s
- Massive build volume: 350×320×325 mm³
- High-temperature all-metal hotend: up to 350°C
- 65°C actively heated chamber for warp-free printing
- Supports over 20 materials: PLA, ABS, PETG, TPU, PC, PA
- REAL High-Flow Hotend: up to 65mm³/s flow rate
- Intelligent DynaSense Extruder with closed-loop servo control
- Automatic multi-color and multi-filament printing
- Supports up to 16 filaments
- 15-point filament monitoring system for feeding, tip location, tension & flow
- AI and Smart Features
- AI-powered pre-flight checklist
- Built-in cameras: BirdsEye, Nozzle, Toolhead
- Auto bed leveling and Z-offset calibration
- Real-time error detection (clogs, tangles, under-extrusion)
- Power loss recovery & filament runout detection
- Compatible with optional 10W / 40W laser modules
- Compatible with digital cutting blade module
- Compatible with pen plotter tool for writing/drawing
- Quick-swap toolheads with automatic recognition
- Laser Power: 10W or 40W (455nm)
- Engraving area: up to 310×270 mm
- Engraves and cuts wood, acrylic, leather, rubber, and more
- Micro Lidar for 3D mesh generation and Z-height sensing
- Built-in air assist, flame detection, and safety systems
- Digital Cutting & Drawing
- Cutting area: 300×285 mm²
- Blade pressure: 50gf to 600gf
- Supports vinyl, paper, fabric, leather, etc.
BAMBU LAB
Bambu Lab H2S AMS Combo 3D Printer
- Large build volume 340×320×340 mm
- Multi-color printing with AMS 2 Pro
- Supports up to 24 colors & materials
- Optical calibration at 5μm accuracy
- All-metal nozzle with 350°C heat
- Heated chamber up to 65°C
- Automatic filament drying system
- 23 smart sensors & 3 AI cameras
- Print speed up to 1000 mm/s
- Servo motor with 67% more extrusion
- Optional 10W laser cutting module
- Active vibration compensation system
- Sturdy, integrated metal body design
- Ultra-quiet operation under 50 dB
BAMBU LAB
Bambu Lab A1 Combo
- Bambu Lab A1 Combo 3D printer
- Multi-Color Printing With AMS
- Build Volume:256*256*256 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 100℃
- built-in Monitoring camera
BAMBU LAB
Bambu Lab X1-Carbon Combo
- Bambu Lab X1 Carbon COMBO 3D printer
- Equipped with the AMS System
- Build Volume:256×256×256mm
- High quality printing with 7 μm Lidar Resolution
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab A1 mini
- Bambu Lab A1 mini 3D printer
- Build Volume:180*180*180 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 80℃
- built-in Monitoring camera
BAMBU LAB
Bambu Lab P1P
- Bambu Lab P1P 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab P1S Combo
- Bambu Lab P1S 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- Enclosed-body for high-temperature filament printing
- Up to 16-color printing with AMS
- built-in chamber camera
BAMBU LAB
Bambu Lab P1S
- Bambu Lab P1S 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
PHROZEN
Phrozen Sonic Mighty Revo
- 10.1-inch 14K mono LCD
- Build Volume of 22.3x12.6x23.5cm
- ACF Release Film
- Print Speed Up to 450Layers/h
- XY Resolution of 16.8x24µm
- High Speed WiFi Connection
- 5.0-inch Capacitive Touch Screen Controller
- 8GB Internal Storage
BAMBU LAB
Bambu Lab X1-Carbon
- Bambu Lab X1 Carbon 3D printer
- Build Volume:256×256×256mm
- High quality printing with 7 μm Lidar Resolution
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab X1E
- Bambu Lab X1E 3D printer
- Build Volume:256×256×256mm
- High quality printing with 7 μm Lidar Resolution
- Max Speed : 500mm/s
- Max Hot End Temperature : 320 ℃
- Chamber Control Temperature 60℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab A1 mini Combo
- Bambu Lab A1 mini Combo 3D printer
- Equipped with AMS system
- Build Volume:180*180*180 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 80℃
- built-in Monitoring camera
PHROZEN
Phrozen Sonic Mega 8K S
- Phrozen Sonic Mega 8K S
- 15" 8K Mono LCD
- Print Volume: 33x18.5x30cm
- Light Source : 405nm ParaLED Matrix 2.0
- Control Panel 3.5" in Large Touch Panel
- XY Resolution 43 µm
- Layer Thickness 0.01-0.30 mm
- Printing Speed 600 layers/hr
- Release Film ACF Film
- Seamless Integration With Pump & Fill
PHROZEN
Phrozen Sonic Mini 8K S
- Phrozen Sonic Mini 8K S Resin 3D Printer
- 7.1 inch mono LCD
- XY resolution 22 μm
- Build Volume 165x72x170
- Printing Speed 80mm/h
- Layer Thickness 0.01-0.30mm
- 3.5" Touch Controller
- Light Source linear projection
PHROZEN
Phrozen Sonic Mighty 12K
- Phrozen Sonic Mighty 12K
- 10.1 inch 12K mono LCD
- Build Volume 218x123x235mm
- XY Resolution of 19x24μm
- Printing Speed 400 layers/hr
- 5 inch touchscreen Controller
- Release Film nFEP Film
- Light Source Linear ProjectionLED
- Laser cut build Plate
SOVOL
Sovol Comgrow T300
- Sovol Comgrow T300 3D Printer
- Build Volume 300*300*350mm
- Printing Speed Up to 600mm/s
- Intelligent Core Based on Klipper
- All metal structure
- Reliable Filament Extrusion
- Nozzle Tempreture Up to 300℃
- Build Plate Tempreture Up to 100℃
- Layer Height 0.08-0.36mm
- Auto Bed Leveling
SOVOL
Sovol Comgrow T500
- Sovol Comgrow T500 3D printer
- Full Metal Aluminum Alloy Frame
- Build Volume 500*500*500mm
- Print Speed up to 500mm/s
- Maximum Nozzle Temp 300℃
- Maximum Build Plate Temp 80℃
- Linear Rails On XYZ Axis For Enhanced Stability
- Klipper Firmware Installed
- high-precision stepper motor system
- Impeccable 49-point leveling precision
SOVOL
Sovol SV08
- Sovol SV08 3D Printer
- Fast & Affordable Voron 2.4 Alternative
- Printing Speed Up to 700mm/s
- Build Volume 350x350x345mm
- 4 Independent Z Motors
- Quad-Gantry-Leveling
- All-axes Linear Rails
- Built-in Camera
- Maximum Bed Temp 100
- Maximum Nozzle Temp 300
- 5" Touch Screen Control Panel
PHROZEN
Phrozen Sonic Mega 8K V2
- Phrozen Sonic Mega 8K V2 Resin 3D Printer
- Printing Volume 33x18.5x40cm
- Printer Speed 400 layer/hr
- Automated Resin Feeder
- Two plug-in air purifiers
- 15" 8K Monochrome LCD
- XY resolution 43µm
PHROZEN
Phrozen Sonic Mighty 8K
- Phrozen Sonic Mighty 8K Resin 3D Printer
- Print Volume:21.8 x 12.3 x 23.5 cm
- Printing Speed: 70 mm/hr
- Built-in Memory
- 5" in Large Touch Control Panel
- 10" Monochrome LCD
- XY Resolution: 28 µm
- Connectivity USB | Ethernet | Wi-Fi
- Built-in HD Camera
PHROZEN
Phrozen Sonic Mini 8K
- Phrozen Sonic Mini 8K 3D Printer
- Print Volume 16.5 x 7.2 x 18 cm
- XY Resolution 22 µm
- Printing Speed 80 mm/hr
- Light Source Linear ProjectionLED Module
- 7.1” MonoChrome LCD Screen
- Frosted Laser Cut Building Plate
BAMBU LAB
Bambu Lab H2D 3D Printer
- Bambu Lab H2D 3D Printer
- Dual-nozzle printing
- 350×320×325 mm³ print volume
- 350°C nozzle & 65°C chamber heat
- Optional 10W/40W laser module
- Digital cutter and pen support
- 600 mm/s high-speed printing
- AI-powered nozzle and top cameras
- 5μm optical motion calibration
- Servo-controlled DynaSense extruder
- Auto pre-flight check and alignment
BAMBU LAB
Bambu H2D Laser Full Combo
- Bambu H2D Laser Full Combo
- Optional 10W/40W Laser and Cutting Module
- Multi-material 3D Printing
- Dual-nozzle printing
- 350×320×325 mm³ print volume
- 350°C nozzle & 65°C chamber heat
- Optional 10W/40W laser module
- Digital cutter and pen support
- 600 mm/s high-speed printing
- AI-powered nozzle and top cameras
- 5μm optical motion calibration
- Servo-controlled DynaSense extruder
- Auto pre-flight check and alignment
HeyGears
HeyGears UltraCraft Reflex RS Turbo Combo
- Amber 8K Screen with 566:1 contrast ratio
- Ultra-sharp details with ±15 μm printing accuracy
- 4.5s per layer high-speed 3D printing
- Dynamic Motion Algorithm 3.0 boosts speed by 33%
- Adaptive resin optimization for 180+ process combos
- Automatic one-click pre-processing & slicing
- Real-time force monitoring with residue detection
- Heated resin tank for stable viscosity and print quality
- C5-grade Z-axis module with ≤2 μm positioning error
- WiFi & USB connectivity for seamless workflow
English
العربية
