Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Categories:
3D Printer
-
Categories:
3D Scanner Accs
-
Categories:
Filamets
![]()
BAMBU LAB
Bambu Lab H2D AMS Combo 3D Printer
- Dual-nozzle system for multi-material & multi-color printing
- Maximum print speed up to 600mm/s
- Massive build volume: 350×320×325 mm³
- High-temperature all-metal hotend: up to 350°C
- 65°C actively heated chamber for warp-free printing
- Supports over 20 materials: PLA, ABS, PETG, TPU, PC, PA
- REAL High-Flow Hotend: up to 65mm³/s flow rate
- Intelligent DynaSense Extruder with closed-loop servo control
- Automatic multi-color and multi-filament printing
- Supports up to 16 filaments
- 15-point filament monitoring system for feeding, tip location, tension & flow
- AI and Smart Features
- AI-powered pre-flight checklist
- Built-in cameras: BirdsEye, Nozzle, Toolhead
- Auto bed leveling and Z-offset calibration
- Real-time error detection (clogs, tangles, under-extrusion)
- Power loss recovery & filament runout detection
- Compatible with optional 10W / 40W laser modules
- Compatible with digital cutting blade module
- Compatible with pen plotter tool for writing/drawing
- Quick-swap toolheads with automatic recognition
- Laser Power: 10W or 40W (455nm)
- Engraving area: up to 310×270 mm
- Engraves and cuts wood, acrylic, leather, rubber, and more
- Micro Lidar for 3D mesh generation and Z-height sensing
- Built-in air assist, flame detection, and safety systems
- Digital Cutting & Drawing
- Cutting area: 300×285 mm²
- Blade pressure: 50gf to 600gf
- Supports vinyl, paper, fabric, leather, etc.
SHINING 3D
Shining 3D EinScan Industrial Pack
- Shining 3D EinScan Industrial Pack
- Electronic Turntable With Special Markers
- Aluminum Tripod with Ballhead
- Improve 3D scan quality
- Compatible with Einscan & Einstar Series
BAMBU LAB
Bambu Lab H2S AMS Combo 3D Printer
- Large build volume 340×320×340 mm
- Multi-color printing with AMS 2 Pro
- Supports up to 24 colors & materials
- Optical calibration at 5μm accuracy
- All-metal nozzle with 350°C heat
- Heated chamber up to 65°C
- Automatic filament drying system
- 23 smart sensors & 3 AI cameras
- Print speed up to 1000 mm/s
- Servo motor with 67% more extrusion
- Optional 10W laser cutting module
- Active vibration compensation system
- Sturdy, integrated metal body design
- Ultra-quiet operation under 50 dB
BAMBU LAB
Bambu Lab A1 Combo
- Bambu Lab A1 Combo 3D printer
- Multi-Color Printing With AMS
- Build Volume:256*256*256 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 100℃
- built-in Monitoring camera
ELEGOO
ELEGOO Centauri Carbon 3D Printer
- ELEGOO Centauri Carbon 3D Printer
- Build Volume 256×256×256 mm
- Fully enclosed chamber
- Max Printing Speed 500 mm/s
- Support Auto-Leveling
- Layer Thickness 0.1-0.4 mm
- 4.3-inch Capacitive Touch Screen Controller
- Max Hot End Temperature 320 °C
- Max Heated Bed Temperature 110 °C
CREALITY
Creality Hi Combo
- Creality Hi Combo 3D Printer
- Support Multicolor 3D Printing
- Build Volume 260×260×300mm
- Printing Speed up to 500mm/s
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
- Full-auto leveling
- 3.2" color touch screen
- Built-in Sensor to Read Filament Info
- All-metal Body
- Monitoring Camera with a Privacy Cap
ANYCUBIC
Anycubic Photon Mono M7 Pro
- Anycubic Photon Mono M7 Pro
- Max Printing Speed 170mm/h
- 10.1'', 14K Mono LCD
- Resolution 13320 * 5120
- 5" IPS Touch Controller
- Auto Resin Refill, Withdrawal
- Auto-Adaptive Technology Control Heating
- Intelligent Workflow-Assist Printing
- Dynamic Temperature Control Resin VAT
SHINING 3D
Shining 3D EinScan Pro Transport Case
- Shining 3D EinScan Pro Transport Case
- Protenct against of Shock and Dust
- Compatinble With Einscan Pro HD & Pro 2X
- With Carry On Handle
- Support Security Locks
CREALITY
Creality K2 Plus Combo
- Creality K2 Plus Combo 3D Printer
- Multi Filament 3D Printing With CFS
- Apus Direct Drive Extruder
- Build Volume 350x350x350mm
- Printing Speed Up to 600mm/s
- Max Nozzle Temp 350°C
- Max Bed Temp 120°C
- Ai Pritning Control System
- Fully Automatic Leveling
- Actively heated chamber
- Conectivity RJ45 ethernet, Wifi
CREALITY
Creality K2 PRO Combo 3D Printer
- 300×300×300 mm large build volume
- CFS for up to 4-color multi-material printing
- Expandable to 16 colors with 4 CFS units
- Equipped with a heated print chamber
- 32GB EMMC File Storage
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
CREALITY
Creality K2 Combo 3D Printer
- 260×260×260 mm large build volume
- CFS for up to 4-color multi-material printing
- Expandable to 16 colors with 4 CFS units
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
eSUN
eSun PLA+
- eSun PLA+ 1.75mm Filament
- Enhanced durability and resilience
- Versatile printer compatibility
- Superb layer bonding for optimal prints
- Recommended Printing Temperature: 210 - 230 °C
- Recommended Bed Temperature: 45 - 60°C
- Density 1.23 g/cm3
- Tensile Strength 60MPa
- Elongation at Break 60%
CREALITY
Creality Ender-5 Max
- Creality Ender-5 Max 3D Printer
- Enormous 400×400×400mm Build volume
- Ultra Fast Printing 700 mm/s
- die-cast aluminum alloy frame
- 36-point auto leveling
- Printing Accuracy 100±0.1 mm
- Layer Height 0.05-0.3 mm
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
CREALITY
Creality Hyper Series PLA
- Creality Hyper Series PLA 1.75mm Filament
- 10x Faster Printing
- Keep Precision While Keeping Ultra-high Speed
- Strengthen Models with Enhanced Toughness
- Recommended Printing Temperature: 190 - 230 °C
- Recommended Bed Temperature: 25 - 60°C
CREALITY
Creality Hi 3D Printer
- Creality Hi 3D Printer
- Build Volume 260×260×300mm
- Printing Speed up to 500mm/s
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
- Full-auto leveling
- 3.2" color touch screen
- Built-in Sensor to Read Filament Info
- All-metal Body
- Monitoring Camera with a Privacy Cap
AESUB
AESUB BLUE 3D Scanning Spray
- AESUB BLUE 3D Scanning Spray
- Layer thickness: 8-15 μm
- Vanishing Scanningspray
- 100% Scanable
- White coating
- Scanning time: approx. 1-2 h
- Sublimation time: approx. 4 h
- Developed and approved by scanning experts
English
العربية
