Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Categories:
3D Printer
-
Categories:
3D Printer Accs
-
Categories:
Filamets
-
Categories:
Laser Engravers
-
Categories:
Resin
XTool
XTOOL F2 Ultra
- XTOOL F2 Ultra Laser Engraver & Cutter
- Dual Lasers: 60W MOPA + 40W Diode
- Engraving Speed up to 15,000mm/s
- Color Engraving on Stainless & Titanium
- Cuts 23mm Wood and 20mm Acrylic
- Dual 48MP AI Cameras for Precision
- Autofocus & Smart Camera Preview
- Max Work Area: 220×500mm with Conveyor
- Supports Objects up to 150mm Height
- Pre-assembled Plug-and-Play Design
- Compatible with SVG, DXF, JPG, PNG, etc.
![]()
BAMBU LAB
Bambu Lab H2D AMS Combo 3D Printer
- Dual-nozzle system for multi-material & multi-color printing
- Maximum print speed up to 600mm/s
- Massive build volume: 350×320×325 mm³
- High-temperature all-metal hotend: up to 350°C
- 65°C actively heated chamber for warp-free printing
- Supports over 20 materials: PLA, ABS, PETG, TPU, PC, PA
- REAL High-Flow Hotend: up to 65mm³/s flow rate
- Intelligent DynaSense Extruder with closed-loop servo control
- Automatic multi-color and multi-filament printing
- Supports up to 16 filaments
- 15-point filament monitoring system for feeding, tip location, tension & flow
- AI and Smart Features
- AI-powered pre-flight checklist
- Built-in cameras: BirdsEye, Nozzle, Toolhead
- Auto bed leveling and Z-offset calibration
- Real-time error detection (clogs, tangles, under-extrusion)
- Power loss recovery & filament runout detection
- Compatible with optional 10W / 40W laser modules
- Compatible with digital cutting blade module
- Compatible with pen plotter tool for writing/drawing
- Quick-swap toolheads with automatic recognition
- Laser Power: 10W or 40W (455nm)
- Engraving area: up to 310×270 mm
- Engraves and cuts wood, acrylic, leather, rubber, and more
- Micro Lidar for 3D mesh generation and Z-height sensing
- Built-in air assist, flame detection, and safety systems
- Digital Cutting & Drawing
- Cutting area: 300×285 mm²
- Blade pressure: 50gf to 600gf
- Supports vinyl, paper, fabric, leather, etc.
CREALITY
Creality Space Pi Filament Dryer
- Creality Space Pi Filament Dryer
- 360° Hot-air Heating
- Real-time humidity & temperature monitoring
- Drying time setting 0-48h
- One-key set for 12 filaments
PHROZEN
Phrozen Castable Resin W40 Orange
- Phrozen Castable Resin W40 Orange
- 40% wax content
- Low shrinkage, high precision
- No foul/strong odor
- Compatible with 405nm 3D Printers
- XY resolution：0.050 mm
XTool
xTool F2 Ultra UV
- 5W 355 nm ultra-precise UV laser
- Cold processing with no burn marks
- Spot size as small as 0.01 × 0.01 mm
- Dual 48MP cameras for accuracy
- 0.2 mm camera positioning precision
- LiDAR-assisted autofocus system
- 200 × 200 mm surface engraving area
- 70 × 70 mm inner-glass engraving
- Up to 15,000 mm/s engraving speed
- Cuts 15 mm basswood (multi-pass)
- Cuts 12 mm acrylic (multi-pass)
- Works on glass, crystal, acrylic, ceramic
- Supports 2D/3D formats including STL, OBJ
- Smart camera live preview system
- 150 mm max rotary engraving diameter
- USB, Wi-Fi, and IP connectivity
- Class 4 certified, industrial build quality
BAMBU LAB
Bambu Lab H2S AMS Combo 3D Printer
- Large build volume 340×320×340 mm
- Multi-color printing with AMS 2 Pro
- Supports up to 24 colors & materials
- Optical calibration at 5μm accuracy
- All-metal nozzle with 350°C heat
- Heated chamber up to 65°C
- Automatic filament drying system
- 23 smart sensors & 3 AI cameras
- Print speed up to 1000 mm/s
- Servo motor with 67% more extrusion
- Optional 10W laser cutting module
- Active vibration compensation system
- Sturdy, integrated metal body design
- Ultra-quiet operation under 50 dB
CREALITY
Creality Space Pi Filament Dryer Plus
- Creality Space Pi Filament Dryer Plus
- Two Rolls Capacity
- 360° Hot-air Heating
- Real-time humidity & temperature monitoring
- Drying time setting 0-48h
- One-key set for 12 filaments
PHROZEN
Phrozen Castable Resin W20 Green
- Phrozen Castable Resin W20 Green
- 20% wax content
- Low shrinkage, high precision
- No foul/strong odor
- Compatible with 405nm 3D Printers
- XY resolution：0.050 mm
XTool
Xtool F2 Laser Engraver
- Dual Laser Source: 15W Diode + 5W IR Laser
- True 6000mm/s High-Speed Engraving
- 50MP Built-in Camera with 0.1mm Alignment
- Auto & Manual Dual-Mode Focusing System
- Ultra-Fine Laser Spot Down to 0.03mm
- 4× Extended Working Area with Slide Module
- Rotary Engraving for Cylindrical Objects
- Compatible with Metals, Wood & Acrylic
- AI-Powered Smart Positioning & Preview
- CoreXY Motion for Vibration-Free Precision
- Supports Wi-Fi, USB, and IP Connectivity
- Compact 4.8kg Portable Industrial Design
- Pre-Assembled, Plug-and-Play Operation
- Class-4 Certified Laser Safety Protection
- Works with xTool Studio & Creative Space
ANYCUBIC
Anycubic Water-Wash Resin+
- Water Washable & Slight Odor
- Low Viscosity for Fast Printing
- High Precision with Low Shrinkage
- Density 1.2 g/cm3
- Viscosity 150~250 mPa
- Hardness 80Shore D
- Tensile Strength 30-45MPa
BAMBU LAB
Bambu Lab A1 Combo
- Bambu Lab A1 Combo 3D printer
- Multi-Color Printing With AMS
- Build Volume:256*256*256 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 100℃
- built-in Monitoring camera
XTool
XTOOL F2 Ultra + Conveyor
- XTOOL F2 Ultra + Conveyor
- Expandable Working Area 220mm*550mm
- Automated production solution
- Dual Lasers: 60W MOPA + 40W Diode
- Engraving Speed up to 15,000mm/s
- Color Engraving on Stainless & Titanium
- Cuts 23mm Wood and 20mm Acrylic
- Dual 48MP AI Cameras for Precision
- Autofocus & Smart Camera Preview
- Max Work Area: 220×500mm with Conveyor
- Supports Objects up to 150mm Height
- Pre-assembled Plug-and-Play Design
- Compatible with SVG, DXF, JPG, PNG, etc.
ELEGOO
ELEGOO Centauri Carbon 3D Printer
- ELEGOO Centauri Carbon 3D Printer
- Build Volume 256×256×256 mm
- Fully enclosed chamber
- Max Printing Speed 500 mm/s
- Support Auto-Leveling
- Layer Thickness 0.1-0.4 mm
- 4.3-inch Capacitive Touch Screen Controller
- Max Hot End Temperature 320 °C
- Max Heated Bed Temperature 110 °C
ANYCUBIC
Anycubic ABS-Like Resin V2
- Anycubic ABS-Like Resin V2
- Water-Washable
- Excellent Toughness
- Durability and Well-Performance
- High Precision Minimal Shrinkage
CREALITY
Creality Sonic Pad
- Creality Sonic Pad
- 3D Printing Pad Based on Klipper
- Compatible with most FDM printers
- Upgrade Printing Speed 2X~5X
- Equipped with RJ45 Ethernet port
- Control up to 4 FDM 3D Printers
- Controlling multiple 3D printers
- 2Gb RAM and 8Gb ROM
- 7" 1024*600 Pixel Multi Touch Screen
- Pre-Configured with 22 Creality Models
XTool
XTOOL F1 Ultra Deluxe Bundle
- xTool F1 Ultra 20W Laser Engraving Machine
- 20W Fiber & 20W Diode Dual Laser
- Almost All Materials Applicable
- Large Working Area 220*220mm
- Expandable Working Area With Conveyor
- Fully Enclosed Safe Cover
- Easy to Use With 16Mp Smart Camera
- Auto Streamline Production
- Cut up to 0.4mm brass sheet & 15mm Wood
- Color engraving on metal
- Compatible With Lightburn , XCS Software
CREALITY
Creality Hi Combo
- Creality Hi Combo 3D Printer
- Support Multicolor 3D Printing
- Build Volume 260×260×300mm
- Printing Speed up to 500mm/s
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
- Full-auto leveling
- 3.2" color touch screen
- Built-in Sensor to Read Filament Info
- All-metal Body
- Monitoring Camera with a Privacy Cap
ANYCUBIC
Anycubic Standard Resin V2
- Anycubic Standard Resin V2
- Superior Strength and Durability
- Elongation at break 25-30%
- Density 1.05-1.25g/cm³
- Viscosity 250-350 cP·mPa·s
- Hardness 80-83D
- Flexural modulus 1500-2100 MPa
- Resin wash Alcohol
- Exceptional Precision with Minimal Distortion
- High Impact Resistance and Broad Compatibility
CREALITY
Creality Filament Dry Box 2.0
- Creality Filament Dry Box 2.0
- Temperature range 45°C-65°C
- 360° hot air heating
- Real-time monitoring
- 24-hour timer
- Compatible With all of Filaments
- Secure power switch
XTool
xTool F1 Ultra 20W Laser Engraver
- xTool F1 Ultra 20W Laser Engraving Machine
- 20W Fiber & 20W Diode Dual Laser
- Almost All Materials Applicable
- Large Working Area 220*220mm
- Expandable Working Area With Conveyor
- Fully Enclosed Safe Cover
- Easy to Use With 16Mp Smart Camera
- Auto Streamline Production
- Cut up to 0.4mm brass sheet & 15mm Wood
- Color engraving on metal
- Compatible With Lightburn , XCS Software
ANYCUBIC
Anycubic Tough Resin 2.0
- Anycubic Tough Resin 2.0
- Density 1.10-1.15g/cm³
- Elongation at break 30-50%
- Hardness 76 Shore D
- Viscosity 150-250MPa·s（25℃）
- Heat deflection temp>60-65℃
- Exceptional Toughness & Resistant to Breakage
- Strong Elongation & High Flexibility
- High Precision, Minimal Shrinkage
ANYCUBIC
Anycubic Photon Mono M7 Pro
- Anycubic Photon Mono M7 Pro
- Max Printing Speed 170mm/h
- 10.1'', 14K Mono LCD
- Resolution 13320 * 5120
- 5" IPS Touch Controller
- Auto Resin Refill, Withdrawal
- Auto-Adaptive Technology Control Heating
- Intelligent Workflow-Assist Printing
- Dynamic Temperature Control Resin VAT
CREALITY
Creality 3D Digital Spool Rack-S
- Accurate Filament Weighing
- Smooth Filament Feeding
- Wide Adaptability
- HD Display
- Compatible With all of FDM Printers
- Large-diameter roller design
English
العربية
