Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Categories:
3D Printer
-
Categories:
3D Scanner
-
Categories:
Filamets
ELEGOO
ELEGOO Centauri Carbon 2
- 4-Color Printing Module for multi-color models
- RFID auto filament detection and syncing
- Upgraded chamber camera with Wi-Fi monitoring
- CoreXY motion system with 500 mm/s speed
- 20,000 mm/s² high-acceleration printing
- 256×256×256 mm build volume capacity
- Hardened brass-steel nozzle for CF materials
- 320°C nozzle for engineering filaments
- 110°C heated bed for strong first layers
- Supports CF, GF, ABS, PC, PA, ASA, PETG
- Triple Z-screws with linear guide rods
- 121-point auto leveling precision
- Dual-sided PEI flexible build plate
- Silent Drive motors for low noise
- Full-Auto Calibration for easy setup
SHINING 3D
Shining 3D Einscan Rigil
- Tri-Mode Laser with Hybrid Light Source
- Wireless Operation with Built-in Computing
- 0.04 + 0.06 mm/m Volumetric Accuracy
- Marker-Free Blue Laser Scanning
- 5MP Full Color Texture Camera
- Works Efficiently in Sunlight Outdoors
- Three Flexible Operation Modes
- Dual Camera System for Laser and IR
- High-Speed Scanning up to 4.4M pts/s
- 6.4" AMOLED Touchscreen with Casting
eSUN
eSun eTPU-95A
- eSun eTPU-95A Filament
- Flexible and soft
- Sturdy and durable
- Compatible with all of 3D Printers
- Extruder Temp 220-250℃
- Bed Temp 40-60℃
- Printing Speed 50mm/s
- Duribility 90%
ELEGOO
ELEGOO PLA-CF Carbon Fiber
- Carbon fiber reinforced for high strength
- Lightweight with excellent rigidity
- Superior strength-to-weight ratio
- Minimal shrinkage and warping
- High dimensional accuracy
- Smooth matte textured finish
- Reduced visible layer lines
- Easy printing like standard PLA
- Compatible with most FDM printers
- Stable and consistent extrusion
- Ideal for functional prototypes
- Strong bending modulus performance
- Precision fit for assemblies
- 1kg spool with tight winding quality
CREALITY
Creality Sermoon X1 3D Scanner
- Creality Sermoon X1 Wireless 3D Scanner
- Multi-Light: 1+7+34 Lasers + 4-Lens NIR
- Ultra Precision: Up to 0.02mm Accuracy
- Fast Scan Speed: Up to 90 FPS
- Huge Scan Range: 5mm to 4000mm Objects
- No Spray Needed: Scans Black & Metal
- Marker-Free for Faces & Large Parts
- Smart AI: Temp Compensation & Tracking
- High Outdoor Tolerance: Up to 100,000 Lux
- Seamless CAD/3D Print Integration
- Compact, Wireless-Ready Design
CREALITY
Creality K2 Plus Combo
- Creality K2 Plus Combo 3D Printer
- Multi Filament 3D Printing With CFS
- Apus Direct Drive Extruder
- Build Volume 350x350x350mm
- Printing Speed Up to 600mm/s
- Max Nozzle Temp 350°C
- Max Bed Temp 120°C
- Ai Pritning Control System
- Fully Automatic Leveling
- Actively heated chamber
- Conectivity RJ45 ethernet, Wifi
ELEGOO
ELEGOO Rapid PETG
- High-speed printing up to 600 mm/s
- ±0.02 mm precise dimensional accuracy
- Strong impact and tensile strength
- Water and weather resistant material
- Low warping and smooth extrusion
- No clogging and bubble-free printing
- Eco-friendly cardboard spool
- Vacuum sealed with desiccant
- Excellent layer adhesion
- Wide FDM printer compatibility
- Heat formable for post-processing
- Optimized for rapid production
- Durable for outdoor applications
- Balanced PLA ease with ABS strength
SHINING 3D
Shining3D EINSTAR Rockit
- Scan Speed: 2,800,000 points/s
- Accuracy up to 0.05 mm
- Frame Rate: 90 fps
- Marker-Free Laser Scanning
- True Wireless with Wi-Fi & USB-C
- Battery runtime up to 3 hours
- Works in light up to 110,000 Lux
- RGB 5MP Color Camera
- Supports STL, OBJ, PLY, 3MF, ASC
- Compact design: 425 g, 130×37×61 mm
CREALITY
Creality K2 PRO Combo 3D Printer
- 300×300×300 mm large build volume
- CFS for up to 4-color multi-material printing
- Active air chamber heating system
- Expandable to 16 colors with 4 CFS units
- Equipped with a heated print chamber
- 32GB EMMC File Storage
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy controla
CREALITY
Creality CR-Wood Printing Filament
- Natural wood texture with realistic grain look
- Premium wood color for artistic 3D prints
- PLA-based and environmentally friendly material
- Non-toxic and odorless during printing
- Stable printing with low shrinkage rate
- Warp-free performance for flat models
- Smooth feeding with neat filament winding
- Reduced clogging for reliable extrusion
- Easy to print on standard FDM printers
- Wide compatibility with common print beds
- Flexible printing temperature range
- Suitable for decorative and creative projects
- Clean surface finish with wood appearance
- Ideal for crafts, models, and gifts
SHINING 3D
Shining3D EINSTAR 2
- Scan speed up to 2,500,000 points/s
- Accuracy up to 0.05 mm
- Max FOV 1170 × 1385 mm
- Lightweight body, only 420 g
- True wireless with 3h battery
- Hybrid light: Blue Laser + IR VCSEL
- No spray required for dark objects
- Works outdoors up to 110,000 Lux
- Full-body scan in just 60 seconds
- Built-in RGB camera for vivid color
CREALITY
Creality K2 Combo 3D Printer
- 260×260×260 mm large build volume
- CFS for up to 4-color multi-material printing
- Expandable to 16 colors with 4 CFS units
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
CREALITY
Creality Hyper PLA RFID 3D Printing Filament
- 10× faster printing, up to 600 mm/s speed
- High-fluidity formula for smooth extrusion
- Rapid cooling for precise high-speed shaping
- Higher tensile strength than ABS
- Tougher and stronger than standard PLA
- Consistent diameter 1.75 mm ±0.03 mm
- Two-way laser diameter measurement
- Neatly spooled to prevent tangling
- Stable extrusion for long print jobs
- Smart RFID for auto filament recognition
- Optimized for Creality high-speed printers
- Premium raw materials with strict QC
CREALITY
Creality K2 Standard 3D Printer
- 260×260×260 mm large build volume
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
Revopoint
Revopoint MetroX 3D Scanner
- Revopoint MetroX 3D Scanner
- Metrology Grade Accuracy up to 0.01 mm
- Scanning Speed Up to 7,000,000 Points/s
- 14 Blue Laser Cross lines Light Source
- 62 lines of blue light fast point cloud creation
- Compatible With Automated Turntable Scan
- 6-AXIS 3D Scanning Stabilizer
- Output formats PLY, OBJ, STL, ASC, 3MF, GLTF, FBX
CREALITY
Creality K2 PRO Standard 3D Printer
- 300×300×300 mm large build volume
- Equipped with a heated print chamber
- 32GB EMMC File Storage
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
SHINING 3D
Shining 3D Einstar VEGA
- Shining 3D Einstar VEGA 3D Scanner
- 6.4'' 2K OLED Touch Screen
- Fully Portable And No need to PC
- High Accuracy 0.05mm
- Working Distance 100~1500mm
- Point Distance 0.05~10mm
- Align Mode Feature; Texture; Markers; Hybrid
- Support Color 3D Scanning
- Light Source Infrared MEMS & VCSEL
- RAM: 32 GB LPDDR4 Memory
- Built-in 5000mAh Battery
- Internal Hard Drive 32GB eMMC + 512GB SSD
- CPU 8-core CPU, 2.4GHz
CREALITY
Creality CR-PLA Carbon 3D Printing Filament
- Carbon-reinforced PLA with high rigidity
- High hardness for durable printed parts
- Non-toxic and odorless during printing
- Environmentally friendly PLA composite
- Smooth feeding and stable extrusion
- Warp-free printing for flat models
- Zero bubbles for clean surface finish
- Precise 1.75mm filament diameter
- Strong layer bonding and stability
- Wide printing temperature range
- Compatible with most FDM printers
- Excellent adhesion on PEI surfaces
- Matte carbon texture hides layer lines
- Ideal for functional 3D applications
CREALITY
Creality Hyper PC Filament 1.75mm 1KG
- Engineering-grade polycarbonate (PC) filament
- Precise 1.75mm diameter with stable tolerance
- Net weight 1KG (2.2 lb) spool
- High tensile strength up to 53.44 MPa
- Excellent flexural strength up to 81.29 MPa
- Ideal for functional and industrial parts
- Recommended nozzle temp 240–260°C
- Heated bed temperature 50–80°C
- Supports printing speeds up to 300mm/s
- Strong X-Y layer adhesion
- Compatible with PEI and carbon plates
- Higher heat resistance than PLA & PETG
- Suitable for high-speed CoreXY printers
- Perfect for prototyping and mechanical parts
FLASHFORGE
Flashforge AD5X Color 3D Printer
- True 4-color intelligent printing
- Max speed up to 600 mm/s
- Acceleration up to 20000 mm/s²
- Auto filament switching system
- 99% power-loss recovery
- Quick-release nozzle design
- Nozzle options: 0.25–0.8 mm
- Core XY stable motion system
- Multi-material compatibility
- 4.3-inch full touch display
- Build volume 220×220×220 mm
- Max bed temp up to 110°C
- WIFI, Ethernet, USB connectivity
- Supports Prusa/Cura/Orca slicers
- Compact 363×363×413 mm body
CREALITY
Creality Sermoon S1 3D Scanner
- Multi-Light: 1+7+34 Lasers + 4-Lens NIR
- Ultra Precision: Up to 0.02mm Accuracy
- Fast Scan Speed: Up to 90 FPS
- Huge Scan Range: 5mm to 4000mm Objects
- No Spray Needed: Scans Black & Metal
- Marker-Free for Faces & Large Parts
- Smart AI: Temp Compensation & Tracking
- High Outdoor Tolerance: Up to 100,000 Lux
- Seamless CAD/3D Print Integration
- Compact, Wireless-Ready Design
ELEGOO
ELEGOO RAPID PLA Plus Filament
- Ultra-fast printing speed up to 600mm/s
- Enhanced toughness and high tensile strength
- Strong layer adhesion for smooth surfaces
- ±0.02mm high dimensional accuracy
- Tangle-free spools for uninterrupted printing
- Vacuum-sealed to prevent moisture and bubbles
- Eco-friendly biodegradable cardboard spool
- Wide compatibility with 1.75mm FDM printers
- Produces glossy, smooth, high-quality finishes
- Ideal for prototypes, models, and mass printing
CREALITY
Creality Hi Combo
- Creality Hi Combo 3D Printer
- Support Multicolor 3D Printing
- Build Volume 260×260×300mm
- Printing Speed up to 500mm/s
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
- Full-auto leveling
- 3.2" color touch screen
- Built-in Sensor to Read Filament Info
- All-metal Body
- Monitoring Camera with a Privacy Cap
SHINING 3D
Shining 3D Einscan HX2
- Shining 3D Einscan HX2 3D Scanner
- Scan Accuracy Up to 0.04mm
- Volumetric Accuracy 0.04+0.06mm/m
- Scan Speed 1,200,000 points/s
- Working Distance 470mm
- Depth of Field 200mm-700mm
- Max FOV 420mm*440mm
- Light Source 13 Blue Laser Crosses + Blue LED
CREALITY
CREALITY SPARKX i7 COMBO
- CREALITY SPARKX i7 COMBO
- Build Volume: 260×260×255 mm
- Max Speed: ≤500 mm/s
- Acceleration: ≤10000 mm/s²
- Extruder: Direct Drive
- Nozzle System: Quick-Swap Hotend
- Supported Nozzles: 0.2 / 0.4 / 0.6 / 0.8 mm
- Input Shaping + Pressure Advance
- AI Camera: 720p with Smart Detection
- Auto Leveling and Z-Offset Calibration
- Print Surface: Dual-sided PEI Plate
- Compatible Materials: PLA, PETG, TPU, PLA-CF
- Connectivity: Wi-Fi, USB Drive, RS-485
- Storage: 8G EMMC + Creality OS
- CFS Lite / CFS Mini Multicolor Support
SHINING 3D
Shining 3D Einscan H2
- Shining 3D Einscan H2 3D Scanner
- Light Source : White Light + IR
- Scan Accuracy Up to 0.05mm
- Scan Speed 1,200,000points/s
- Volumetric Accuracy 0.05±0.1mm/m
- Frame rate 55FPS
- Depth of Field 200-1500mm
- Maximum FOV 780mm*900mm
- Point distance 0.2mm-3mm
eSUN
eSun PLA+
- eSun PLA+ 1.75mm Filament
- Enhanced durability and resilience
- Versatile printer compatibility
- Superb layer bonding for optimal prints
- Recommended Printing Temperature: 210 - 230 °C
- Recommended Bed Temperature: 45 - 60°C
- Density 1.23 g/cm3
- Tensile Strength 60MPa
- Elongation at Break 60%
ANYCUBIC
Anycubic Kobra X Color 3D Printer
- Native 4-Color Printing System
- 260×260×260 mm³ Build Volume
- Expandable Up to 19 Colors
- ACE GEN 2 Multicolor Technology
- 81.25% Less Filament Change Waste
- 300 mm/s Default Print Speed
- 600 mm/s Maximum Print Speed
- 20,000 mm/s² Max Acceleration
- LeviQ 3.0 49-Point Auto-Leveling
- Direct Drive Extruder System
- Supports PLA, PETG, TPU, ASA
- AI Spaghetti & Object Detection
- 720P Camera for Live Monitoring
- Ultra-Quiet Operation ≤48 dB
SHINING 3D
Shining 3D EinScan Libre
- Shining 3D Einscan Liber 3D Scanner
- 101 parallel blue laser line accelerates scanning
- speed for high resolution
- 101 blue laser lines, marker free
- Fast scan speed up to 4,500,000 points/s
- High resolution to 0.05mm
- Working distance from 200~500mm
- Color texture capturing
CREALITY
Creality Hyper Series PLA
- Creality Hyper Series PLA 1.75mm Filament
- 10x Faster Printing
- Keep Precision While Keeping Ultra-high Speed
- Strengthen Models with Enhanced Toughness
- Recommended Printing Temperature: 190 - 230 °C
- Recommended Bed Temperature: 25 - 60°C
CREALITY
Creality Ender-5 Max
- Creality Ender-5 Max 3D Printer
- Enormous 400×400×400mm Build volume
- Ultra Fast Printing 700 mm/s
- die-cast aluminum alloy frame
- 36-point auto leveling
- Printing Accuracy 100±0.1 mm
- Layer Height 0.05-0.3 mm
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
CREALITY
Creality CR-Scan Raptor
- Creality CR-Scan Raptor 3D Scanner
- 7 Blue Parallel Laser Lines
- Accuracy, up to 0.02mm
- Scanning Speed up to 60fps
- Objects between 5-2000mm
- 24-Bit Full-Color Scanning
- Anti-shaking for Smooth Scanning
- Unique Face & Body Algorithm
- Scan Black/Metal Objects without Sprays
- Peaceful Scanning in Various Environments
eSUN
eSun ePLA-Silk Magic
- eSun ePLA-Silk Magic
- Different Colors at Different Angles
- Extruder Temp 210-230°C
- Bed Temp 45-60°C
- Density 1.256cm3
- Tensil Strength 57.64
- Durability 40%
- Printability 90%
CREALITY
Creality Ender-3 V3 Plus
- Creality Ender-3 V3 Plus 3D Printer
- Max Printing Volume 300*300*300mm
- Max Printing Speed 600mm/s
- Max Extruder Temp 300°C
- Max Bed Temp 100°C
- Fully Automatic Bed Leveling
- 4.3Inch Touch Screen Controller
- Tough Aerospace Aluminum Alloy
- Quick-swap Nozzle
- Two Powerful Motors on Y-axis
- Automated XZ Belt Tensioning
- Printing Accuracy ±0.2mm
CREALITY
Creality&BASF Ultra Series PLA
- Creality&BASF Ultra Series PLA 1.75mm Filament
- Faster cooling and shaping
- Higher accuracy
- Faster Priting Speed 600mm/s
- Recommended Printing Temperature: 200-230℃
- Recommended Bed Temperature: 25 - 60°C
SHINING 3D
Shining 3D Einscan HX
- Shining 3D Einscan HX 3D Scanner
- Scan Accuracy Up to 0.04mm
- Volumetric Accuracy 0.04+0.06mm/m
- Scan Speed 1,200,000 points/s
- Working Distance 470mm
- Depth of Field 200mm-700mm
- Max FOV 420mm*440mm
- Light Source 7 Blue Laser Crosses + Blue LED
English
العربية
