Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Categories:
3D Printer
-
Categories:
3D Printer Accs
-
Categories:
Filamets
ELEGOO
ELEGOO Centauri Carbon 2
- 4-Color Printing Module for multi-color models
- RFID auto filament detection and syncing
- Upgraded chamber camera with Wi-Fi monitoring
- CoreXY motion system with 500 mm/s speed
- 20,000 mm/s² high-acceleration printing
- 256×256×256 mm build volume capacity
- Hardened brass-steel nozzle for CF materials
- 320°C nozzle for engineering filaments
- 110°C heated bed for strong first layers
- Supports CF, GF, ABS, PC, PA, ASA, PETG
- Triple Z-screws with linear guide rods
- 121-point auto leveling precision
- Dual-sided PEI flexible build plate
- Silent Drive motors for low noise
- Full-Auto Calibration for easy setup
eSUN
eSun eTPU-95A
- eSun eTPU-95A Filament
- Flexible and soft
- Sturdy and durable
- Compatible with all of 3D Printers
- Extruder Temp 220-250℃
- Bed Temp 40-60℃
- Printing Speed 50mm/s
- Duribility 90%
CREALITY
Creality Space Pi Filament Dryer
- Creality Space Pi Filament Dryer
- 360° Hot-air Heating
- Real-time humidity & temperature monitoring
- Drying time setting 0-48h
- One-key set for 12 filaments
ELEGOO
ELEGOO PLA-CF Carbon Fiber
- Carbon fiber reinforced for high strength
- Lightweight with excellent rigidity
- Superior strength-to-weight ratio
- Minimal shrinkage and warping
- High dimensional accuracy
- Smooth matte textured finish
- Reduced visible layer lines
- Easy printing like standard PLA
- Compatible with most FDM printers
- Stable and consistent extrusion
- Ideal for functional prototypes
- Strong bending modulus performance
- Precision fit for assemblies
- 1kg spool with tight winding quality
CREALITY
Creality K2 Plus Combo
- Creality K2 Plus Combo 3D Printer
- Multi Filament 3D Printing With CFS
- Apus Direct Drive Extruder
- Build Volume 350x350x350mm
- Printing Speed Up to 600mm/s
- Max Nozzle Temp 350°C
- Max Bed Temp 120°C
- Ai Pritning Control System
- Fully Automatic Leveling
- Actively heated chamber
- Conectivity RJ45 ethernet, Wifi
CREALITY
Creality Space Pi Filament Dryer Plus
- Creality Space Pi Filament Dryer Plus
- Two Rolls Capacity
- 360° Hot-air Heating
- Real-time humidity & temperature monitoring
- Drying time setting 0-48h
- One-key set for 12 filaments
ELEGOO
ELEGOO Rapid PETG
- High-speed printing up to 600 mm/s
- ±0.02 mm precise dimensional accuracy
- Strong impact and tensile strength
- Water and weather resistant material
- Low warping and smooth extrusion
- No clogging and bubble-free printing
- Eco-friendly cardboard spool
- Vacuum sealed with desiccant
- Excellent layer adhesion
- Wide FDM printer compatibility
- Heat formable for post-processing
- Optimized for rapid production
- Durable for outdoor applications
- Balanced PLA ease with ABS strength
CREALITY
Creality K2 PRO Combo 3D Printer
- 300×300×300 mm large build volume
- CFS for up to 4-color multi-material printing
- Active air chamber heating system
- Expandable to 16 colors with 4 CFS units
- Equipped with a heated print chamber
- 32GB EMMC File Storage
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy controla
CREALITY
Creality CR-Wood Printing Filament
- Natural wood texture with realistic grain look
- Premium wood color for artistic 3D prints
- PLA-based and environmentally friendly material
- Non-toxic and odorless during printing
- Stable printing with low shrinkage rate
- Warp-free performance for flat models
- Smooth feeding with neat filament winding
- Reduced clogging for reliable extrusion
- Easy to print on standard FDM printers
- Wide compatibility with common print beds
- Flexible printing temperature range
- Suitable for decorative and creative projects
- Clean surface finish with wood appearance
- Ideal for crafts, models, and gifts
CREALITY
Creality K2 Combo 3D Printer
- 260×260×260 mm large build volume
- CFS for up to 4-color multi-material printing
- Expandable to 16 colors with 4 CFS units
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
CREALITY
Creality Sonic Pad
- Creality Sonic Pad
- 3D Printing Pad Based on Klipper
- Compatible with most FDM printers
- Upgrade Printing Speed 2X~5X
- Equipped with RJ45 Ethernet port
- Control up to 4 FDM 3D Printers
- Controlling multiple 3D printers
- 2Gb RAM and 8Gb ROM
- 7" 1024*600 Pixel Multi Touch Screen
- Pre-Configured with 22 Creality Models
CREALITY
Creality Hyper PLA RFID 3D Printing Filament
- 10× faster printing, up to 600 mm/s speed
- High-fluidity formula for smooth extrusion
- Rapid cooling for precise high-speed shaping
- Higher tensile strength than ABS
- Tougher and stronger than standard PLA
- Consistent diameter 1.75 mm ±0.03 mm
- Two-way laser diameter measurement
- Neatly spooled to prevent tangling
- Stable extrusion for long print jobs
- Smart RFID for auto filament recognition
- Optimized for Creality high-speed printers
- Premium raw materials with strict QC
CREALITY
Creality K2 Standard 3D Printer
- 260×260×260 mm large build volume
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
CREALITY
Creality Filament Dry Box 2.0
- Creality Filament Dry Box 2.0
- Temperature range 45°C-65°C
- 360° hot air heating
- Real-time monitoring
- 24-hour timer
- Compatible With all of Filaments
- Secure power switch
CREALITY
Creality K2 PRO Standard 3D Printer
- 300×300×300 mm large build volume
- Equipped with a heated print chamber
- 32GB EMMC File Storage
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
CREALITY
Creality CR-PLA Carbon 3D Printing Filament
- Carbon-reinforced PLA with high rigidity
- High hardness for durable printed parts
- Non-toxic and odorless during printing
- Environmentally friendly PLA composite
- Smooth feeding and stable extrusion
- Warp-free printing for flat models
- Zero bubbles for clean surface finish
- Precise 1.75mm filament diameter
- Strong layer bonding and stability
- Wide printing temperature range
- Compatible with most FDM printers
- Excellent adhesion on PEI surfaces
- Matte carbon texture hides layer lines
- Ideal for functional 3D applications
CREALITY
Creality 3D Digital Spool Rack-S
- Accurate Filament Weighing
- Smooth Filament Feeding
- Wide Adaptability
- HD Display
- Compatible With all of FDM Printers
- Large-diameter roller design
CREALITY
Creality Hyper PC Filament 1.75mm 1KG
- Engineering-grade polycarbonate (PC) filament
- Precise 1.75mm diameter with stable tolerance
- Net weight 1KG (2.2 lb) spool
- High tensile strength up to 53.44 MPa
- Excellent flexural strength up to 81.29 MPa
- Ideal for functional and industrial parts
- Recommended nozzle temp 240–260°C
- Heated bed temperature 50–80°C
- Supports printing speeds up to 300mm/s
- Strong X-Y layer adhesion
- Compatible with PEI and carbon plates
- Higher heat resistance than PLA & PETG
- Suitable for high-speed CoreXY printers
- Perfect for prototyping and mechanical parts
FLASHFORGE
Flashforge AD5X Color 3D Printer
- True 4-color intelligent printing
- Max speed up to 600 mm/s
- Acceleration up to 20000 mm/s²
- Auto filament switching system
- 99% power-loss recovery
- Quick-release nozzle design
- Nozzle options: 0.25–0.8 mm
- Core XY stable motion system
- Multi-material compatibility
- 4.3-inch full touch display
- Build volume 220×220×220 mm
- Max bed temp up to 110°C
- WIFI, Ethernet, USB connectivity
- Supports Prusa/Cura/Orca slicers
- Compact 363×363×413 mm body
ELEGOO
ELEGOO Mercury XS Bundle
- ELEGOO Mercury XS Bundle
- 360° all-round exposure
- Dual function of Curing & Washing
- Large washing volume of 7000ml
- Easy and intuitive operation
- UV Protection Cover
- Wide Compatibility
ELEGOO
ELEGOO RAPID PLA Plus Filament
- Ultra-fast printing speed up to 600mm/s
- Enhanced toughness and high tensile strength
- Strong layer adhesion for smooth surfaces
- ±0.02mm high dimensional accuracy
- Tangle-free spools for uninterrupted printing
- Vacuum-sealed to prevent moisture and bubbles
- Eco-friendly biodegradable cardboard spool
- Wide compatibility with 1.75mm FDM printers
- Produces glossy, smooth, high-quality finishes
- Ideal for prototypes, models, and mass printing
CREALITY
Creality Hi Combo
- Creality Hi Combo 3D Printer
- Support Multicolor 3D Printing
- Build Volume 260×260×300mm
- Printing Speed up to 500mm/s
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
- Full-auto leveling
- 3.2" color touch screen
- Built-in Sensor to Read Filament Info
- All-metal Body
- Monitoring Camera with a Privacy Cap
ELEGOO
ELEGOO Mercury X Bundle
- ELEGOO Mercury X Bundle
- Washing and Curing Machine
- 60 ° Three-Dimensional Curing
- Large washing volume of 7000ml
- Easy and intuitive operation
- UV Protection Cover
- Wide Compatibility
CREALITY
CREALITY SPARKX i7 COMBO
- CREALITY SPARKX i7 COMBO
- Build Volume: 260×260×255 mm
- Max Speed: ≤500 mm/s
- Acceleration: ≤10000 mm/s²
- Extruder: Direct Drive
- Nozzle System: Quick-Swap Hotend
- Supported Nozzles: 0.2 / 0.4 / 0.6 / 0.8 mm
- Input Shaping + Pressure Advance
- AI Camera: 720p with Smart Detection
- Auto Leveling and Z-Offset Calibration
- Print Surface: Dual-sided PEI Plate
- Compatible Materials: PLA, PETG, TPU, PLA-CF
- Connectivity: Wi-Fi, USB Drive, RS-485
- Storage: 8G EMMC + Creality OS
- CFS Lite / CFS Mini Multicolor Support
CREALITY
Creality UW-01
- Creality UW-01
- Washing & Curing Machine
- Dual Band UV Light Source
- Large Size Washing Container
- 2~90min Washing & Curing
- Touch Buttons
- Washing Container Size 190*154*200mm
eSUN
eSun PLA+
- eSun PLA+ 1.75mm Filament
- Enhanced durability and resilience
- Versatile printer compatibility
- Superb layer bonding for optimal prints
- Recommended Printing Temperature: 210 - 230 °C
- Recommended Bed Temperature: 45 - 60°C
- Density 1.23 g/cm3
- Tensile Strength 60MPa
- Elongation at Break 60%
ANYCUBIC
Anycubic Kobra X Color 3D Printer
- Native 4-Color Printing System
- 260×260×260 mm³ Build Volume
- Expandable Up to 19 Colors
- ACE GEN 2 Multicolor Technology
- 81.25% Less Filament Change Waste
- 300 mm/s Default Print Speed
- 600 mm/s Maximum Print Speed
- 20,000 mm/s² Max Acceleration
- LeviQ 3.0 49-Point Auto-Leveling
- Direct Drive Extruder System
- Supports PLA, PETG, TPU, ASA
- AI Spaghetti & Object Detection
- 720P Camera for Live Monitoring
- Ultra-Quiet Operation ≤48 dB
ANYCUBIC
Anycubic Wash & Cure 3
- Anycubic Wash & Cure 3
- 4L Extra-Large Cleaning Bucket Size
- Gooseneck UV Lighting
- Dual-layer Design
- IPA Saving Design
- Very Low Noise Working
- Curing Size 160*180mm
CREALITY
Creality Hyper Series PLA
- Creality Hyper Series PLA 1.75mm Filament
- 10x Faster Printing
- Keep Precision While Keeping Ultra-high Speed
- Strengthen Models with Enhanced Toughness
- Recommended Printing Temperature: 190 - 230 °C
- Recommended Bed Temperature: 25 - 60°C
CREALITY
Creality Ender-5 Max
- Creality Ender-5 Max 3D Printer
- Enormous 400×400×400mm Build volume
- Ultra Fast Printing 700 mm/s
- die-cast aluminum alloy frame
- 36-point auto leveling
- Printing Accuracy 100±0.1 mm
- Layer Height 0.05-0.3 mm
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
ANYCUBIC
Anycubic Wash & Cure 3 Plus
- Anycubic Wash & Cure 3 Plus
- Size Upgrade: 7.6L
- Curing Size 228*128*260mm
- Increase Energy Value 30,000uW/cm²
- IPA Saving: Dual-layer Curing Platform
- 12L Washing Bucket
- Curing Max Size φ220*260mm
eSUN
eSun ePLA-Silk Magic
- eSun ePLA-Silk Magic
- Different Colors at Different Angles
- Extruder Temp 210-230°C
- Bed Temp 45-60°C
- Density 1.256cm3
- Tensil Strength 57.64
- Durability 40%
- Printability 90%
CREALITY
Creality Ender-3 V3 Plus
- Creality Ender-3 V3 Plus 3D Printer
- Max Printing Volume 300*300*300mm
- Max Printing Speed 600mm/s
- Max Extruder Temp 300°C
- Max Bed Temp 100°C
- Fully Automatic Bed Leveling
- 4.3Inch Touch Screen Controller
- Tough Aerospace Aluminum Alloy
- Quick-swap Nozzle
- Two Powerful Motors on Y-axis
- Automated XZ Belt Tensioning
- Printing Accuracy ±0.2mm
CREALITY
Creality K1 Max Dual-Sided Build Plate
- Creality K1 Max Dual-Sided Printing Platform Board Kit
- Dual Use Functionality
- High Adhesion
- Quick Installation
- Cost Effective
- Easy to Demold
- Highly Flat
- Wear Resistant & Durable
CREALITY
Creality&BASF Ultra Series PLA
- Creality&BASF Ultra Series PLA 1.75mm Filament
- Faster cooling and shaping
- Higher accuracy
- Faster Priting Speed 600mm/s
- Recommended Printing Temperature: 200-230℃
- Recommended Bed Temperature: 25 - 60°C
English
العربية
