Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Availability:
In stock
-
Categories:
3D Printer
-
Categories:
Filamets
ELEGOO
ELEGOO Centauri Carbon 2
- 4-Color Printing Module for multi-color models
- RFID auto filament detection and syncing
- Upgraded chamber camera with Wi-Fi monitoring
- CoreXY motion system with 500 mm/s speed
- 20,000 mm/s² high-acceleration printing
- 256×256×256 mm build volume capacity
- Hardened brass-steel nozzle for CF materials
- 320°C nozzle for engineering filaments
- 110°C heated bed for strong first layers
- Supports CF, GF, ABS, PC, PA, ASA, PETG
- Triple Z-screws with linear guide rods
- 121-point auto leveling precision
- Dual-sided PEI flexible build plate
- Silent Drive motors for low noise
- Full-Auto Calibration for easy setup
eSUN
eSun eTPU-95A
- eSun eTPU-95A Filament
- Flexible and soft
- Sturdy and durable
- Compatible with all of 3D Printers
- Extruder Temp 220-250℃
- Bed Temp 40-60℃
- Printing Speed 50mm/s
- Duribility 90%
ELEGOO
ELEGOO PLA-CF Carbon Fiber
- Carbon fiber reinforced for high strength
- Lightweight with excellent rigidity
- Superior strength-to-weight ratio
- Minimal shrinkage and warping
- High dimensional accuracy
- Smooth matte textured finish
- Reduced visible layer lines
- Easy printing like standard PLA
- Compatible with most FDM printers
- Stable and consistent extrusion
- Ideal for functional prototypes
- Strong bending modulus performance
- Precision fit for assemblies
- 1kg spool with tight winding quality
ELEGOO
ELEGOO Rapid PETG
- High-speed printing up to 600 mm/s
- ±0.02 mm precise dimensional accuracy
- Strong impact and tensile strength
- Water and weather resistant material
- Low warping and smooth extrusion
- No clogging and bubble-free printing
- Eco-friendly cardboard spool
- Vacuum sealed with desiccant
- Excellent layer adhesion
- Wide FDM printer compatibility
- Heat formable for post-processing
- Optimized for rapid production
- Durable for outdoor applications
- Balanced PLA ease with ABS strength
CREALITY
Creality K2 PRO Combo 3D Printer
- 300×300×300 mm large build volume
- CFS for up to 4-color multi-material printing
- Active air chamber heating system
- Expandable to 16 colors with 4 CFS units
- Equipped with a heated print chamber
- 32GB EMMC File Storage
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy controla
CREALITY
Creality CR-Wood Printing Filament
- Natural wood texture with realistic grain look
- Premium wood color for artistic 3D prints
- PLA-based and environmentally friendly material
- Non-toxic and odorless during printing
- Stable printing with low shrinkage rate
- Warp-free performance for flat models
- Smooth feeding with neat filament winding
- Reduced clogging for reliable extrusion
- Easy to print on standard FDM printers
- Wide compatibility with common print beds
- Flexible printing temperature range
- Suitable for decorative and creative projects
- Clean surface finish with wood appearance
- Ideal for crafts, models, and gifts
CREALITY
Creality K2 Combo 3D Printer
- 260×260×260 mm large build volume
- CFS for up to 4-color multi-material printing
- Expandable to 16 colors with 4 CFS units
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
CREALITY
Creality Hyper PLA RFID 3D Printing Filament
- 10× faster printing, up to 600 mm/s speed
- High-fluidity formula for smooth extrusion
- Rapid cooling for precise high-speed shaping
- Higher tensile strength than ABS
- Tougher and stronger than standard PLA
- Consistent diameter 1.75 mm ±0.03 mm
- Two-way laser diameter measurement
- Neatly spooled to prevent tangling
- Stable extrusion for long print jobs
- Smart RFID for auto filament recognition
- Optimized for Creality high-speed printers
- Premium raw materials with strict QC
CREALITY
Creality K2 Standard 3D Printer
- 260×260×260 mm large build volume
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
CREALITY
Creality K2 PRO Standard 3D Printer
- 300×300×300 mm large build volume
- Equipped with a heated print chamber
- 32GB EMMC File Storage
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
CREALITY
Creality CR-PLA Carbon 3D Printing Filament
- Carbon-reinforced PLA with high rigidity
- High hardness for durable printed parts
- Non-toxic and odorless during printing
- Environmentally friendly PLA composite
- Smooth feeding and stable extrusion
- Warp-free printing for flat models
- Zero bubbles for clean surface finish
- Precise 1.75mm filament diameter
- Strong layer bonding and stability
- Wide printing temperature range
- Compatible with most FDM printers
- Excellent adhesion on PEI surfaces
- Matte carbon texture hides layer lines
- Ideal for functional 3D applications
CREALITY
Creality Hyper PC Filament 1.75mm 1KG
- Engineering-grade polycarbonate (PC) filament
- Precise 1.75mm diameter with stable tolerance
- Net weight 1KG (2.2 lb) spool
- High tensile strength up to 53.44 MPa
- Excellent flexural strength up to 81.29 MPa
- Ideal for functional and industrial parts
- Recommended nozzle temp 240–260°C
- Heated bed temperature 50–80°C
- Supports printing speeds up to 300mm/s
- Strong X-Y layer adhesion
- Compatible with PEI and carbon plates
- Higher heat resistance than PLA & PETG
- Suitable for high-speed CoreXY printers
- Perfect for prototyping and mechanical parts
ELEGOO
ELEGOO RAPID PLA Plus Filament
- Ultra-fast printing speed up to 600mm/s
- Enhanced toughness and high tensile strength
- Strong layer adhesion for smooth surfaces
- ±0.02mm high dimensional accuracy
- Tangle-free spools for uninterrupted printing
- Vacuum-sealed to prevent moisture and bubbles
- Eco-friendly biodegradable cardboard spool
- Wide compatibility with 1.75mm FDM printers
- Produces glossy, smooth, high-quality finishes
- Ideal for prototypes, models, and mass printing
CREALITY
Creality Ender-5 Max
- Creality Ender-5 Max 3D Printer
- Enormous 400×400×400mm Build volume
- Ultra Fast Printing 700 mm/s
- die-cast aluminum alloy frame
- 36-point auto leveling
- Printing Accuracy 100±0.1 mm
- Layer Height 0.05-0.3 mm
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
CREALITY
Creality Ender-3 V3 Plus
- Creality Ender-3 V3 Plus 3D Printer
- Max Printing Volume 300*300*300mm
- Max Printing Speed 600mm/s
- Max Extruder Temp 300°C
- Max Bed Temp 100°C
- Fully Automatic Bed Leveling
- 4.3Inch Touch Screen Controller
- Tough Aerospace Aluminum Alloy
- Quick-swap Nozzle
- Two Powerful Motors on Y-axis
- Automated XZ Belt Tensioning
- Printing Accuracy ±0.2mm
CREALITY
Creality HALOT X1 Resin 3D Printer
- Creality HALOT X1 16K
- 10.1-inch advanced monochrome LCD screen
- Pixel size 14 × 19 µm for extreme accuracy
- True leveling-free printing system built-in
- Fast printing speed up to 170 mm per hour
- One-second quick-release build plate design
- Quick-release resin vat for easy handling
- 92-zone intelligent exposure for clarity
- Stable top-down motion with dual rails
- Z-axis accuracy up to 0.01 mm guaranteed
- Smart AFU resin management system built-in
- Supports versatile 405 nm UV printing resin
- Easy file transfer via USB and WiFi options
- 3.98-inch capacitive touchscreen interface
- 3DRAYAN.COM official Piocreat dealer in UAE
CREALITY
Creality Hi 3D Printer
- Creality Hi 3D Printer
- Build Volume 260×260×300mm
- Printing Speed up to 500mm/s
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
- Full-auto leveling
- 3.2" color touch screen
- Built-in Sensor to Read Filament Info
- All-metal Body
- Monitoring Camera with a Privacy Cap
HeyGears
HeyGears Reflex 2 3D Printer
- 161 OptiZone Light Engine for precision
- 10.7-inch 6K Amber Pro screen upgrade
- Screen lifespan exceeds 6 000 hours
- AI light calibration across 86 000 zones
- C5 grade Z-axis ± 2 µm accuracy
- Die-cast unibody base for rigidity
- Advanced thermal cooling system
- Intelligent temperature control ± 1 °C
- High-sensitivity residue detection 0.01 N
- Auto leveling platform 0.15° deviation
- Wide compatibility with pro resins
- Modular design for easy maintenance
HeyGears
HeyGears Reflex 2 Pro 3D Printer
- 230×144×350 mm Build Volume
- 2.3× Larger Print Capacity
- 1032-Zone OptiZone Light Engine
- 86,000+ AI Light Calibration Zones
- Amber Screen Pro with 6000h Lifespan
- C5 Grade Precision Z-Axis Module
- Intelligent ±1°C Temperature Control
- Auto Resin Refill with Ultrasonic Sensor
- Floating Build Platform Auto-Leveling
- Die-Cast Unibody Aluminum Frame
- 0.15 mm Residue Detection Sensor
- Supports High-Viscosity Resins
- 25,600 Microstep FOC Motor Control
- Available at 3DRAYAN.COM UAE
ANYCUBIC
Anycubic Photon Mono M7 Pro
- Anycubic Photon Mono M7 Pro
- Max Printing Speed 170mm/h
- 10.1'', 14K Mono LCD
- Resolution 13320 * 5120
- 5" IPS Touch Controller
- Auto Resin Refill, Withdrawal
- Auto-Adaptive Technology Control Heating
- Intelligent Workflow-Assist Printing
- Dynamic Temperature Control Resin VAT
ELEGOO
ELEGOO OrangeStorm Giga
- ELEGOO OrangeStorm Giga
- Build Volume 800x800x1000mm
- Printing Speed 300mm/s
- Multi-Nozzle Printing
- Portable 7-inch Controller
- Multi link Printing Plate
- Max Bed Temp 90°C
- Max Extruder Temp 300℃
CREALITY
Creality K1 Max
- Creality K1 Max 3D Printer
- 600mm/s Printing Speed
- Versatile Ai LiDAR
- Priting Dimention : 300*300*300mm
- Maximum Hotend Temp 300℃
- Maximum HotBed Temp 100℃
- Equipted to Ai Camera
- equipped to Air Purifier
CREALITY
Creality Ender-5 Max Full Kit
- Creality Ender-5 Max Full Kit
- With Encloser Box
- Enormous 400×400×400mm Build volume
- Ultra Fast Printing 700 mm/s
- die-cast aluminum alloy frame
- 36-point auto leveling
- Printing Accuracy 100±0.1 mm
- Layer Height 0.05-0.3 mm
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
English
العربية
