Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Categories:
3D Printer
-
Categories:
3D Printer Accs
-
Categories:
3D Scanner
-
Categories:
3D Scanner Accs
-
Categories:
Filamets
-
Categories:
Resin
ELEGOO
ELEGOO Centauri Carbon 2
- 4-Color Printing Module for multi-color models
- RFID auto filament detection and syncing
- Upgraded chamber camera with Wi-Fi monitoring
- CoreXY motion system with 500 mm/s speed
- 20,000 mm/s² high-acceleration printing
- 256×256×256 mm build volume capacity
- Hardened brass-steel nozzle for CF materials
- 320°C nozzle for engineering filaments
- 110°C heated bed for strong first layers
- Supports CF, GF, ABS, PC, PA, ASA, PETG
- Triple Z-screws with linear guide rods
- 121-point auto leveling precision
- Dual-sided PEI flexible build plate
- Silent Drive motors for low noise
- Full-Auto Calibration for easy setup
SHINING 3D
Shining 3D Einscan Rigil
- Tri-Mode Laser with Hybrid Light Source
- Wireless Operation with Built-in Computing
- 0.04 + 0.06 mm/m Volumetric Accuracy
- Marker-Free Blue Laser Scanning
- 5MP Full Color Texture Camera
- Works Efficiently in Sunlight Outdoors
- Three Flexible Operation Modes
- Dual Camera System for Laser and IR
- High-Speed Scanning up to 4.4M pts/s
- 6.4" AMOLED Touchscreen with Casting
SHINING 3D
Shining 3D EinScan Industrial Pack
- Shining 3D EinScan Industrial Pack
- Electronic Turntable With Special Markers
- Aluminum Tripod with Ballhead
- Improve 3D scan quality
- Compatible with Einscan & Einstar Series
eSUN
eSun eTPU-95A
- eSun eTPU-95A Filament
- Flexible and soft
- Sturdy and durable
- Compatible with all of 3D Printers
- Extruder Temp 220-250℃
- Bed Temp 40-60℃
- Printing Speed 50mm/s
- Duribility 90%
CREALITY
Creality Space Pi Filament Dryer
- Creality Space Pi Filament Dryer
- 360° Hot-air Heating
- Real-time humidity & temperature monitoring
- Drying time setting 0-48h
- One-key set for 12 filaments
PHROZEN
Phrozen Castable Resin W40 Orange
- Phrozen Castable Resin W40 Orange
- 40% wax content
- Low shrinkage, high precision
- No foul/strong odor
- Compatible with 405nm 3D Printers
- XY resolution：0.050 mm
ELEGOO
ELEGOO PLA-CF Carbon Fiber
- Carbon fiber reinforced for high strength
- Lightweight with excellent rigidity
- Superior strength-to-weight ratio
- Minimal shrinkage and warping
- High dimensional accuracy
- Smooth matte textured finish
- Reduced visible layer lines
- Easy printing like standard PLA
- Compatible with most FDM printers
- Stable and consistent extrusion
- Ideal for functional prototypes
- Strong bending modulus performance
- Precision fit for assemblies
- 1kg spool with tight winding quality
CREALITY
Creality Sermoon X1 3D Scanner
- Creality Sermoon X1 Wireless 3D Scanner
- Multi-Light: 1+7+34 Lasers + 4-Lens NIR
- Ultra Precision: Up to 0.02mm Accuracy
- Fast Scan Speed: Up to 90 FPS
- Huge Scan Range: 5mm to 4000mm Objects
- No Spray Needed: Scans Black & Metal
- Marker-Free for Faces & Large Parts
- Smart AI: Temp Compensation & Tracking
- High Outdoor Tolerance: Up to 100,000 Lux
- Seamless CAD/3D Print Integration
- Compact, Wireless-Ready Design
CREALITY
Creality K2 Plus Combo
- Creality K2 Plus Combo 3D Printer
- Multi Filament 3D Printing With CFS
- Apus Direct Drive Extruder
- Build Volume 350x350x350mm
- Printing Speed Up to 600mm/s
- Max Nozzle Temp 350°C
- Max Bed Temp 120°C
- Ai Pritning Control System
- Fully Automatic Leveling
- Actively heated chamber
- Conectivity RJ45 ethernet, Wifi
CREALITY
Creality Space Pi Filament Dryer Plus
- Creality Space Pi Filament Dryer Plus
- Two Rolls Capacity
- 360° Hot-air Heating
- Real-time humidity & temperature monitoring
- Drying time setting 0-48h
- One-key set for 12 filaments
PHROZEN
Phrozen Castable Resin W20 Green
- Phrozen Castable Resin W20 Green
- 20% wax content
- Low shrinkage, high precision
- No foul/strong odor
- Compatible with 405nm 3D Printers
- XY resolution：0.050 mm
ELEGOO
ELEGOO Rapid PETG
- High-speed printing up to 600 mm/s
- ±0.02 mm precise dimensional accuracy
- Strong impact and tensile strength
- Water and weather resistant material
- Low warping and smooth extrusion
- No clogging and bubble-free printing
- Eco-friendly cardboard spool
- Vacuum sealed with desiccant
- Excellent layer adhesion
- Wide FDM printer compatibility
- Heat formable for post-processing
- Optimized for rapid production
- Durable for outdoor applications
- Balanced PLA ease with ABS strength
SHINING 3D
Shining3D EINSTAR Rockit
- Scan Speed: 2,800,000 points/s
- Accuracy up to 0.05 mm
- Frame Rate: 90 fps
- Marker-Free Laser Scanning
- True Wireless with Wi-Fi & USB-C
- Battery runtime up to 3 hours
- Works in light up to 110,000 Lux
- RGB 5MP Color Camera
- Supports STL, OBJ, PLY, 3MF, ASC
- Compact design: 425 g, 130×37×61 mm
CREALITY
Creality K2 PRO Combo 3D Printer
- 300×300×300 mm large build volume
- CFS for up to 4-color multi-material printing
- Active air chamber heating system
- Expandable to 16 colors with 4 CFS units
- Equipped with a heated print chamber
- 32GB EMMC File Storage
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy controla
ANYCUBIC
Anycubic Water-Wash Resin+
- Water Washable & Slight Odor
- Low Viscosity for Fast Printing
- High Precision with Low Shrinkage
- Density 1.2 g/cm3
- Viscosity 150~250 mPa
- Hardness 80Shore D
- Tensile Strength 30-45MPa
CREALITY
Creality CR-Wood Printing Filament
- Natural wood texture with realistic grain look
- Premium wood color for artistic 3D prints
- PLA-based and environmentally friendly material
- Non-toxic and odorless during printing
- Stable printing with low shrinkage rate
- Warp-free performance for flat models
- Smooth feeding with neat filament winding
- Reduced clogging for reliable extrusion
- Easy to print on standard FDM printers
- Wide compatibility with common print beds
- Flexible printing temperature range
- Suitable for decorative and creative projects
- Clean surface finish with wood appearance
- Ideal for crafts, models, and gifts
SHINING 3D
Shining3D EINSTAR 2
- Scan speed up to 2,500,000 points/s
- Accuracy up to 0.05 mm
- Max FOV 1170 × 1385 mm
- Lightweight body, only 420 g
- True wireless with 3h battery
- Hybrid light: Blue Laser + IR VCSEL
- No spray required for dark objects
- Works outdoors up to 110,000 Lux
- Full-body scan in just 60 seconds
- Built-in RGB camera for vivid color
CREALITY
Creality K2 Combo 3D Printer
- 260×260×260 mm large build volume
- CFS for up to 4-color multi-material printing
- Expandable to 16 colors with 4 CFS units
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
ANYCUBIC
Anycubic ABS-Like Resin V2
- Anycubic ABS-Like Resin V2
- Water-Washable
- Excellent Toughness
- Durability and Well-Performance
- High Precision Minimal Shrinkage
CREALITY
Creality Sonic Pad
- Creality Sonic Pad
- 3D Printing Pad Based on Klipper
- Compatible with most FDM printers
- Upgrade Printing Speed 2X~5X
- Equipped with RJ45 Ethernet port
- Control up to 4 FDM 3D Printers
- Controlling multiple 3D printers
- 2Gb RAM and 8Gb ROM
- 7" 1024*600 Pixel Multi Touch Screen
- Pre-Configured with 22 Creality Models
CREALITY
Creality Hyper PLA RFID 3D Printing Filament
- 10× faster printing, up to 600 mm/s speed
- High-fluidity formula for smooth extrusion
- Rapid cooling for precise high-speed shaping
- Higher tensile strength than ABS
- Tougher and stronger than standard PLA
- Consistent diameter 1.75 mm ±0.03 mm
- Two-way laser diameter measurement
- Neatly spooled to prevent tangling
- Stable extrusion for long print jobs
- Smart RFID for auto filament recognition
- Optimized for Creality high-speed printers
- Premium raw materials with strict QC
CREALITY
Creality K2 Standard 3D Printer
- 260×260×260 mm large build volume
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
Revopoint
Revopoint MetroX 3D Scanner
- Revopoint MetroX 3D Scanner
- Metrology Grade Accuracy up to 0.01 mm
- Scanning Speed Up to 7,000,000 Points/s
- 14 Blue Laser Cross lines Light Source
- 62 lines of blue light fast point cloud creation
- Compatible With Automated Turntable Scan
- 6-AXIS 3D Scanning Stabilizer
- Output formats PLY, OBJ, STL, ASC, 3MF, GLTF, FBX
ANYCUBIC
Anycubic Standard Resin V2
- Anycubic Standard Resin V2
- Superior Strength and Durability
- Elongation at break 25-30%
- Density 1.05-1.25g/cm³
- Viscosity 250-350 cP·mPa·s
- Hardness 80-83D
- Flexural modulus 1500-2100 MPa
- Resin wash Alcohol
- Exceptional Precision with Minimal Distortion
- High Impact Resistance and Broad Compatibility
CREALITY
Creality Filament Dry Box 2.0
- Creality Filament Dry Box 2.0
- Temperature range 45°C-65°C
- 360° hot air heating
- Real-time monitoring
- 24-hour timer
- Compatible With all of Filaments
- Secure power switch
CREALITY
Creality K2 PRO Standard 3D Printer
- 300×300×300 mm large build volume
- Equipped with a heated print chamber
- 32GB EMMC File Storage
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
SHINING 3D
Shining 3D Einstar VEGA
- Shining 3D Einstar VEGA 3D Scanner
- 6.4'' 2K OLED Touch Screen
- Fully Portable And No need to PC
- High Accuracy 0.05mm
- Working Distance 100~1500mm
- Point Distance 0.05~10mm
- Align Mode Feature; Texture; Markers; Hybrid
- Support Color 3D Scanning
- Light Source Infrared MEMS & VCSEL
- RAM: 32 GB LPDDR4 Memory
- Built-in 5000mAh Battery
- Internal Hard Drive 32GB eMMC + 512GB SSD
- CPU 8-core CPU, 2.4GHz
ANYCUBIC
Anycubic Tough Resin 2.0
- Anycubic Tough Resin 2.0
- Density 1.10-1.15g/cm³
- Elongation at break 30-50%
- Hardness 76 Shore D
- Viscosity 150-250MPa·s（25℃）
- Heat deflection temp>60-65℃
- Exceptional Toughness & Resistant to Breakage
- Strong Elongation & High Flexibility
- High Precision, Minimal Shrinkage
CREALITY
Creality CR-PLA Carbon 3D Printing Filament
- Carbon-reinforced PLA with high rigidity
- High hardness for durable printed parts
- Non-toxic and odorless during printing
- Environmentally friendly PLA composite
- Smooth feeding and stable extrusion
- Warp-free printing for flat models
- Zero bubbles for clean surface finish
- Precise 1.75mm filament diameter
- Strong layer bonding and stability
- Wide printing temperature range
- Compatible with most FDM printers
- Excellent adhesion on PEI surfaces
- Matte carbon texture hides layer lines
- Ideal for functional 3D applications
CREALITY
Creality 3D Digital Spool Rack-S
- Accurate Filament Weighing
- Smooth Filament Feeding
- Wide Adaptability
- HD Display
- Compatible With all of FDM Printers
- Large-diameter roller design
English
العربية
