• 450W high-power solar charging output
• 25% efficiency with N-Type 16BB cells
• Premium monocrystalline solar cells
• Excellent low-light performance
• Advanced 16BB cell technology
• Smart bypass diodes for safer use
• Up to 10% better shade performance
• Durable ETFE weatherproof surface
• IP68 protection for outdoor use
• Foldable and lightweight design
• 20% lighter than standard panels
• Strong anodized aluminum frame
• Wide connector compatibility
• Includes cables, bag, and 3-year warranty

• 4-Color Printing Module for multi-color models
• RFID auto filament detection and syncing
• Upgraded chamber camera with Wi-Fi monitoring
• CoreXY motion system with 500 mm/s speed
• 20,000 mm/s² high-acceleration printing
• 256×256×256 mm build volume capacity
• Hardened brass-steel nozzle for CF materials
• 320°C nozzle for engineering filaments
• 110°C heated bed for strong first layers
• Supports CF, GF, ABS, PC, PA, ASA, PETG
• Triple Z-screws with linear guide rods
• 121-point auto leveling precision
• Dual-sided PEI flexible build plate
• Silent Drive motors for low noise
• Full-Auto Calibration for easy setup

• Shining3D Accessories Pro Kit
• Magnetic marker balls enhance tracking stability
• Reusable components for flexible scanning setups
• 300mm turntable for precise object rotation
• Ideal for featureless and complex surfaces
• Marker cards and sheets improve scan accuracy
• Fixture columns support small object positioning

• Tri-Mode Laser with Hybrid Light Source
• Wireless Operation with Built-in Computing
• 0.04 + 0.06 mm/m Volumetric Accuracy
• Marker-Free Blue Laser Scanning
• 5MP Full Color Texture Camera
• Works Efficiently in Sunlight Outdoors
• Three Flexible Operation Modes
• Dual Camera System for Laser and IR
• High-Speed Scanning up to 4.4M pts/s
• 6.4" AMOLED Touchscreen with Casting

• Creality Space Pi Filament Dryer
• 360° Hot-air Heating
• Real-time humidity & temperature monitoring
• Drying time setting 0-48h
• One-key set for 12 filaments

• 400W powerful solar charging output
• 25% conversion efficiency
• Advanced N-Type 16BB solar cells
• Premium monocrystalline cells
• Excellent low-light performance
• Stable output in cloudy weather
• Smart parallel wiring design
• Reinforced adjustable kickstands
• 5000+ fold cycle durability
• ETFE waterproof surface
• IP68 outdoor protection
• Foldable and lightweight build
• Strong anodized aluminum frame
• Wide connector compatibility
• Includes bag, cables, and warranty

• Dual Sizes: 3mm & 6mm Options
• 400PCS High-Reflective Dots per Pack
• Universal 3D Scanner Compatibility
• Improves Tracking Accuracy
• Ideal for Smooth & Dark Surfaces
• Strong Adhesion, Easy Removal
• Reduces Re-Scanning & Alignment Errors

• Creality Sermoon X1 Wireless 3D Scanner
• Multi-Light: 1+7+34 Lasers + 4-Lens NIR
• Ultra Precision: Up to 0.02mm Accuracy
• Fast Scan Speed: Up to 90 FPS
• Huge Scan Range: 5mm to 4000mm Objects
• No Spray Needed: Scans Black & Metal
• Marker-Free for Faces & Large Parts
• Smart AI: Temp Compensation & Tracking
• High Outdoor Tolerance: Up to 100,000 Lux
• Seamless CAD/3D Print Integration
• Compact, Wireless-Ready Design

• Creality K2 Plus Combo 3D Printer
• Multi Filament 3D Printing With CFS
•  Apus Direct Drive Extruder​
• Build Volume 350x350x350mm
• Printing Speed Up to 600mm/s
• Max Nozzle Temp 350°C
• Max Bed Temp 120°C
• Ai Pritning Control System
• Fully Automatic Leveling
• Actively heated chamber
• Conectivity RJ45 ethernet, Wifi

• Creality Space Pi Filament Dryer Plus
• Two Rolls Capacity
• 360° Hot-air Heating
• Real-time humidity & temperature monitoring
• Drying time setting 0-48h
• One-key set for 12 filaments

• 2,764.8Wh base battery, expandable to 58kWh
• 3,840W output with 7,680W surge power
• Expandable output up to 11.52kW
• 20ms UPS seamless backup switching
• Industry-first 12kW bypass support
• Up to 19.2kW solar input support
• 2,400W fast solar charging input
• LiFePO₄ battery with 6,000+ cycles
• Up to 17 years battery lifespan
• Smart app control via Wi-Fi & Bluetooth
• Supports home, RV, and off-grid use
• Ultra-low self-consumption design
• Fast AC and generator charging
• Durable compact premium build
• 5-year official BLUETTI warranty

• Scan Speed: 2,800,000 points/s
• Accuracy up to 0.05 mm
• Frame Rate: 90 fps
• Marker-Free Laser Scanning
• True Wireless with Wi-Fi & USB-C
• Battery runtime up to 3 hours
• Works in light up to 110,000 Lux
• RGB 5MP Color Camera
• Supports STL, OBJ, PLY, 3MF, ASC
• Compact design: 425 g, 130×37×61 mm

• 300×300×300 mm large build volume
• CFS for up to 4-color multi-material printing
• Active air chamber heating system
• Expandable to 16 colors with 4 CFS units
• Equipped with a heated print chamber
• 32GB EMMC File Storage
• Max nozzle temp 300°C for advanced filaments
• Hardened steel nozzle, 40 mm³/s flow rate
• Speeds up to 600 mm/s, 20,000 mm/s² accel
• Intelligent auto bed leveling system
• Dual AI cameras for live monitoring
• Steel linear rail for smooth, durable motion
• 4-inch color touchscreen for easy controla

• Creality Scan Bridge
• Large Capacity & Fast Charging
• WiFi 6 AX6000 Fast Data Transmission
• Wireless Screen Mirroring
• Magnetic Quick Setup
• Intelligent Power-saving

• Simple Yet Refined
• Post-processing Tools
• 24PCS KIT
• Contain Nozzle Cleaning Tools
• Thoughtful Design
• Craftsmanship with Ingenuity

• 3,014Wh long-life LiFePO₄ battery
• 2,400W output, 4,800W surge power
• World’s smallest 3kWh power station
• 21% lighter than similar 3kWh units
• 12V/30A DC port for campervan use
• 2,300W ultra-fast AC charging
• Up to 1,200W solar charging input
• Supports combined AC + DC charging
• 10ms UPS instant backup switching
• Bluetooth & Wi-Fi smart app control
• 6,000+ battery cycles to 80%
• Compact and travel-friendly design
• Pass-through charging supported
• 5-year official warranty coverage

• Scan speed up to 2,500,000 points/s
• Accuracy up to 0.05 mm
• Max FOV 1170 × 1385 mm
• Lightweight body, only 420 g
• True wireless with 3h battery
• Hybrid light: Blue Laser + IR VCSEL
• No spray required for dark objects
• Works outdoors up to 110,000 Lux
• Full-body scan in just 60 seconds
• Built-in RGB camera for vivid color

• 260×260×260 mm large build volume
• CFS for up to 4-color multi-material printing
• Expandable to 16 colors with 4 CFS units
• Max nozzle temp 300°C for advanced filaments
• Hardened steel nozzle, 40 mm³/s flow rate
• Speeds up to 600 mm/s, 20,000 mm/s² accel
• Intelligent auto bed leveling system
• Dual AI cameras for live monitoring
• Steel linear rail for smooth, durable motion
• 4-inch color touchscreen for easy control

• Shining 3D EinScan Industrial Pack
• Electronic Turntable With Special Markers
• Aluminum Tripod with Ballhead
• Improve 3D scan quality
• Compatible with Einscan & Einstar Series

• Creality Sonic Pad 
• 3D Printing Pad Based on Klipper
• Compatible with most FDM printers
• Upgrade Printing Speed 2X~5X
• Equipped with RJ45 Ethernet port
• Control up to 4 FDM 3D Printers
• Controlling multiple 3D printers
• 2Gb RAM and 8Gb ROM
• 7" 1024*600 Pixel Multi Touch Screen
• Pre-Configured with 22 Creality Models

• 400W powerful solar charging output
• 25% conversion efficiency
• Advanced N-Type 16BB solar cells
• Premium monocrystalline cells
• Excellent low-light performance
• Stable output in cloudy weather
• Smart parallel wiring design
• Reinforced adjustable kickstands
• 5000+ fold cycle durability
• ETFE waterproof surface
• IP68 outdoor protection
• Foldable and lightweight build
• Strong anodized aluminum frame
• Wide connector compatibility
• Includes bag, cables, and warranty

• 260×260×260 mm large build volume
• Max nozzle temp 300°C for advanced filaments
• Hardened steel nozzle, 40 mm³/s flow rate
• Speeds up to 600 mm/s, 20,000 mm/s² accel
• Intelligent auto bed leveling system
• Dual AI cameras for live monitoring
• Steel linear rail for smooth, durable motion
• 4-inch color touchscreen for easy control

• Revopoint MetroX 3D Scanner
• Metrology Grade Accuracy up to 0.01 mm
• Scanning Speed Up to 7,000,000 Points/s
• 14 Blue Laser Cross lines Light Source
• 62 lines of blue light fast point cloud creation
• Compatible With Automated Turntable Scan
• 6-AXIS 3D Scanning Stabilizer
• Output formats PLY, OBJ, STL, ASC, 3MF, GLTF, FBX

• Shining 3D Color Pack for Einscan Pro HD
• External texture camera
• USB A Port

• Creality Filament Dry Box 2.0
• Temperature range 45°C-65°C
• 360° hot air heating
• Real-time monitoring
• 24-hour timer
• Compatible With all of Filaments
• Secure power switch

• 300×300×300 mm large build volume
• Equipped with a heated print chamber
• 32GB EMMC File Storage
• Max nozzle temp 300°C for advanced filaments
• Hardened steel nozzle, 40 mm³/s flow rate
• Speeds up to 600 mm/s, 20,000 mm/s² accel
• Intelligent auto bed leveling system
• Dual AI cameras for live monitoring
• Steel linear rail for smooth, durable motion
• 4-inch color touchscreen for easy control

• Shining 3D Einstar VEGA 3D Scanner
• 6.4'' 2K OLED Touch Screen 
• Fully Portable And No need to PC
• High Accuracy 0.05mm
• Working Distance 100~1500mm
• Point Distance 0.05~10mm
• Align Mode Feature; Texture; Markers; Hybrid
• Support Color 3D Scanning
• Light Source Infrared MEMS &  VCSEL
• RAM: 32 GB LPDDR4 Memory
• Built-in 5000mAh Battery
• Internal Hard Drive 32GB eMMC + 512GB SSD
• CPU 8-core CPU, 2.4GHz

• Shining 3D Color Pack for Einscan Pro 2X
• Color 3D Scanning Module
• Compatible with Einscan Pro 2X
• USA A Standard Port

• Accurate Filament Weighing
• Smooth Filament Feeding
• Wide Adaptability
• HD Display
• Compatible With all of FDM Printers
• Large-diameter roller design

• Fully enclosed chamber for stable printing
• Quad independent toolheads (4 nozzles)
• Up to 500% faster print performance
• Max travel speed: 600 mm/s
• Acceleration up to 30,000 mm/s²
• Near-zero purge waste technology
• FlashSwap multi-nozzle system
• Build volume: 256 × 256 × 256 mm
• Max nozzle temp: 320°C
• Heated bed up to 120°C
• Multi-material & multi-color printing
• Auto leveling & flow calibration
• Full HD camera remote monitoring
• WiFi, LAN & USB connectivity

• Multi-Light: 1+7+34 Lasers + 4-Lens NIR
• Ultra Precision: Up to 0.02mm Accuracy
• Fast Scan Speed: Up to 90 FPS
• Huge Scan Range: 5mm to 4000mm Objects
• No Spray Needed: Scans Black & Metal
• Marker-Free for Faces & Large Parts
• Smart AI: Temp Compensation & Tracking
• High Outdoor Tolerance: Up to 100,000 Lux
• Seamless CAD/3D Print Integration
• Compact, Wireless-Ready Design

• Einscan HX Adhesive Markers 6mm
• 3168 Adhesive Markers
• Compatible With EinScan HX , EinScan H2 & EinStar

• ELEGOO Mercury XS Bundle
• 360° all-round exposure
• Dual function of Curing & Washing
• Large washing volume of 7000ml
• Easy and intuitive operation
• UV Protection Cover
• Wide Compatibility

• Quad independent toolheads (4 nozzles)
• Up to 500% faster printing speed
• Max travel speed: 600 mm/s
• Acceleration up to 30,000 mm/s²
• Near-zero purge waste technology
• FlashSwap multi-nozzle system
• Build volume: 256 × 256 × 256 mm
• Max nozzle temp: 320°C
• Heated bed up to 120°C
• Multi-material & multi-color printing
• Auto leveling & flow calibration
• Full HD camera for monitoring
• WiFi, LAN & USB connectivity
• PEI flexible steel build plate
• Supports engineering-grade filaments

• Einscan HX Adhesive Markers 3mm
• 2040 Adhesive Markers
• Compatible With EinScan HX , EinScan H2 & EinStar

• Shining 3D Einscan HX2 3D Scanner
• Scan Accuracy Up to 0.04mm
• Volumetric Accuracy 0.04+0.06mm/m
• Scan Speed 1,200,000 points/s
• Working Distance 470mm
• Depth of Field 200mm-700mm
• Max FOV 420mm*440mm
• Light Source 13 Blue Laser Crosses + Blue LED