Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Categories:
3D Printer
-
Categories:
3D Printer Accs
-
Categories:
Filamets
CREALITY
Creality Ender-5 Max
- Creality Ender-5 Max 3D Printer
- Enormous 400×400×400mm Build volume
- Ultra Fast Printing 700 mm/s
- die-cast aluminum alloy frame
- 36-point auto leveling
- Printing Accuracy 100±0.1 mm
- Layer Height 0.05-0.3 mm
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
ANYCUBIC
Anycubic PLA High Speed
- Anycubic PLA High Speed
- Priting Up to 500mm/s
- Enhanced Fluidity and Better Cooling Effect
CREALITY
Creality UW-01
- Creality UW-01
- Washing & Curing Machine
- Dual Band UV Light Source
- Large Size Washing Container
- 2~90min Washing & Curing
- Touch Buttons
- Washing Container Size 190*154*200mm
ANYCUBIC
Anycubic PLA Silk
- Anycubic PLA Silk Filament
- Silk Feel and Lustre
- Eco-Friendly, Biodegradable
- Widely Applicable to Printers
CREALITY
Creality Ender-3 V3 Plus
- Creality Ender-3 V3 Plus 3D Printer
- Max Printing Volume 300*300*300mm
- Max Printing Speed 600mm/s
- Max Extruder Temp 300°C
- Max Bed Temp 100°C
- Fully Automatic Bed Leveling
- 4.3Inch Touch Screen Controller
- Tough Aerospace Aluminum Alloy
- Quick-swap Nozzle
- Two Powerful Motors on Y-axis
- Automated XZ Belt Tensioning
- Printing Accuracy ±0.2mm
ANYCUBIC
Anycubic Wash & Cure 3
- Anycubic Wash & Cure 3
- 4L Extra-Large Cleaning Bucket Size
- Gooseneck UV Lighting
- Dual-layer Design
- IPA Saving Design
- Very Low Noise Working
- Curing Size 160*180mm
CREALITY
Creality HALOT X1 Resin 3D Printer
- Creality HALOT X1 16K
- 10.1-inch advanced monochrome LCD screen
- Pixel size 14 × 19 µm for extreme accuracy
- True leveling-free printing system built-in
- Fast printing speed up to 170 mm per hour
- One-second quick-release build plate design
- Quick-release resin vat for easy handling
- 92-zone intelligent exposure for clarity
- Stable top-down motion with dual rails
- Z-axis accuracy up to 0.01 mm guaranteed
- Smart AFU resin management system built-in
- Supports versatile 405 nm UV printing resin
- Easy file transfer via USB and WiFi options
- 3.98-inch capacitive touchscreen interface
- 3DRAYAN.COM official Piocreat dealer in UAE
ANYCUBIC
Anycubic PLA+
- Anycubic PLA+ 3D Pinter Filament
- High Toughness
- High precision and minimal shrinkage
- Eco-Friendly
- Compatible with all of FDM 3D Printer
ANYCUBIC
Anycubic Wash & Cure 3 Plus
- Anycubic Wash & Cure 3 Plus
- Size Upgrade: 7.6L
- Curing Size 228*128*260mm
- Increase Energy Value 30,000uW/cm²
- IPA Saving: Dual-layer Curing Platform
- 12L Washing Bucket
- Curing Max Size φ220*260mm
CREALITY
Creality Hi 3D Printer
- Creality Hi 3D Printer
- Build Volume 260×260×300mm
- Printing Speed up to 500mm/s
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
- Full-auto leveling
- 3.2" color touch screen
- Built-in Sensor to Read Filament Info
- All-metal Body
- Monitoring Camera with a Privacy Cap
eSUN
eSUN PETG
- eSun PETG Filament
- Resistant to Variety of Chemicals
- High Precision Printing
- Density 1.27
- Heat Distortion Temp 64
- Tensin Strength 52.2 MPa
- Elogation at Break 83%
- Extruder Temp 230-250
- Bed Temp 75~950
CREALITY
Creality K1 Max Dual-Sided Build Plate
- Creality K1 Max Dual-Sided Printing Platform Board Kit
- Dual Use Functionality
- High Adhesion
- Quick Installation
- Cost Effective
- Easy to Demold
- Highly Flat
- Wear Resistant & Durable
ANYCUBIC
Anycubic Photon P1 Resin 3D Printer
- Industrial-grade ball screw for ultra-stable motion
- Supports high-viscosity resins up to 8000 cps
- Wave Release tech reduces peel force by 60%
- Precision-milled steel build plate <80 microns
- LCD alignment accuracy below 70 microns
- LighTurbo 4.0 with <2° light collimation
- Over 92% full-screen light uniformity
- Dual-material printing with optional kit
- Resin temperature control up to 40°C
- Intelligent Leveling System 3.0
- Dynamic Release System 3.0
- Light-Off Compensation 3.0
- NFEP film for smooth, consistent curing
- Remote monitoring via built-in camera
- One-click slicing in Photon Workshop 4.0
eSUN
eSUN ABS
- eSUN ABS Filament
- Unbelievable Toughness
- Impact resistance
- Heat resistance
- Density(g/cm3) 1.04
- Heat Distortion 78℃ 0.45MPa
- Melt Flow Index(g/10min) 12(220℃/10kg）
- Tensile Strength 43MPa
- Elongation at Break 22%
- Extruder Temp 230 – 270℃
- Bed Temp 95 – 110°C
ANYCUBIC
Anycubic Wash & Cure Max
- Anycubic Wash & Cure Max
- 14.9L Impressive Maximum Cleaning Size
- 360° Spray Cleaning
- Alcohol-Efficient, Saving over 50%
- Supports Large 3D Models
HeyGears
HeyGears Reflex 2 3D Printer
- 161 OptiZone Light Engine for precision
- 10.7-inch 6K Amber Pro screen upgrade
- Screen lifespan exceeds 6 000 hours
- AI light calibration across 86 000 zones
- C5 grade Z-axis ± 2 µm accuracy
- Die-cast unibody base for rigidity
- Advanced thermal cooling system
- Intelligent temperature control ± 1 °C
- High-sensitivity residue detection 0.01 N
- Auto leveling platform 0.15° deviation
- Wide compatibility with pro resins
- Modular design for easy maintenance
eSUN
eSun eTPU-95A
- eSun eTPU-95A Filament
- Flexible and soft
- Sturdy and durable
- Compatible with all of 3D Printers
- Extruder Temp 220-250℃
- Bed Temp 40-60℃
- Printing Speed 50mm/s
- Duribility 90%
CREALITY
Creality Filament Vacuum Storage Kit
- Creality Filament Vacuum Storage Kit
- vacuum storage of filament
- Strong Suction for Fast Pumping
- Food-grade Material for Recycling
- One-button Vacuuming
HeyGears
HeyGears Reflex 2 Pro 3D Printer
- 230×144×350 mm Build Volume
- 2.3× Larger Print Capacity
- 1032-Zone OptiZone Light Engine
- 86,000+ AI Light Calibration Zones
- Amber Screen Pro with 6000h Lifespan
- C5 Grade Precision Z-Axis Module
- Intelligent ±1°C Temperature Control
- Auto Resin Refill with Ultrasonic Sensor
- Floating Build Platform Auto-Leveling
- Die-Cast Unibody Aluminum Frame
- 0.15 mm Residue Detection Sensor
- Supports High-Viscosity Resins
- 25,600 Microstep FOC Motor Control
- Available at 3DRAYAN.COM UAE
BAMBU LAB
Bambu Temperature Plate Smooth PEI
- Bambu Temperature Plate Smooth PEI
- Surface temperature resistance Up to 120℃
- Spring steel thickness 0.4 mm
- Usable print size 256*256 mm
- Excellent adhesion
- Works well with the Automatic Calibration
- Can be replaced by the user
eSUN
eSun eTPU-HS
- eSun eTPU-HS Filament
- Flexible and soft
- High elasticity
- High toughness
- Nozzle Temp 220~250°C
- Bed Temp 45~60°C
- Durability 90%
- Printing Speed 50 – 200mm/s
- Build Surface : Masking paper, PVP solid glue, PEI
ANYCUBIC
Anycubic ACE Pro
- Multicolour Filament system
- For drying and storage
- Equipped with four spool slots
- Capable of eight-color printing
- Features anti-tangle protection
- Includes RFID detection system
eSUN
eSUN ePLA-HS
- eSun ePLA-HS Filament
- Suitable for high-speed printing
- Smooth flow without blocking
- Quick Cooling and forming
- Density 1.24 g/cm3
- Extruder Temp 210-230
- Bed Temp 45-60
- Printing Speed 350mm/s
ANYCUBIC
Anycubic Photon Mono M7 Pro
- Anycubic Photon Mono M7 Pro
- Max Printing Speed 170mm/h
- 10.1'', 14K Mono LCD
- Resolution 13320 * 5120
- 5" IPS Touch Controller
- Auto Resin Refill, Withdrawal
- Auto-Adaptive Technology Control Heating
- Intelligent Workflow-Assist Printing
- Dynamic Temperature Control Resin VAT
English
العربية
