Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Type:
RESIN
-
Brand:
ANYCUBIC
-
Brand:
HeyGears
ANYCUBIC
Anycubic Photon P1 Resin 3D Printer
- Industrial-grade ball screw for ultra-stable motion
- Supports high-viscosity resins up to 8000 cps
- Wave Release tech reduces peel force by 60%
- Precision-milled steel build plate <80 microns
- LCD alignment accuracy below 70 microns
- LighTurbo 4.0 with <2° light collimation
- Over 92% full-screen light uniformity
- Dual-material printing with optional kit
- Resin temperature control up to 40°C
- Intelligent Leveling System 3.0
- Dynamic Release System 3.0
- Light-Off Compensation 3.0
- NFEP film for smooth, consistent curing
- Remote monitoring via built-in camera
- One-click slicing in Photon Workshop 4.0
HeyGears
HeyGears Reflex 2 3D Printer
- 161 OptiZone Light Engine for precision
- 10.7-inch 6K Amber Pro screen upgrade
- Screen lifespan exceeds 6 000 hours
- AI light calibration across 86 000 zones
- C5 grade Z-axis ± 2 µm accuracy
- Die-cast unibody base for rigidity
- Advanced thermal cooling system
- Intelligent temperature control ± 1 °C
- High-sensitivity residue detection 0.01 N
- Auto leveling platform 0.15° deviation
- Wide compatibility with pro resins
- Modular design for easy maintenance
ANYCUBIC
Anycubic Photon Mono M7 Pro
- Anycubic Photon Mono M7 Pro
- Max Printing Speed 170mm/h
- 10.1'', 14K Mono LCD
- Resolution 13320 * 5120
- 5" IPS Touch Controller
- Auto Resin Refill, Withdrawal
- Auto-Adaptive Technology Control Heating
- Intelligent Workflow-Assist Printing
- Dynamic Temperature Control Resin VAT
HeyGears
HeyGears UltraCraft Reflex RS Turbo Combo
- Amber 8K Screen with 566:1 contrast ratio
- Ultra-sharp details with ±15 μm printing accuracy
- 4.5s per layer high-speed 3D printing
- Dynamic Motion Algorithm 3.0 boosts speed by 33%
- Adaptive resin optimization for 180+ process combos
- Automatic one-click pre-processing & slicing
- Real-time force monitoring with residue detection
- Heated resin tank for stable viscosity and print quality
- C5-grade Z-axis module with ≤2 μm positioning error
- WiFi & USB connectivity for seamless workflow
ANYCUBIC
Anycubic Photon Mono M7 Max
- Anycubic Photon Mono M7 Max
- Resin Auto-Fill Unit
- Build Volume 298x164x300mm
- 13.6 inch monochrome 7K screen
- X/Y Axis Resolution 46*46μm
- LighTurbo 3.0 High-Precision Light Source System
- Maximum print speed op to 86mm/h
- Dynamic temperature control resin vat
- Intelligence Assisted Printing System
- Light Source COB light source+ Fresnel lens
- Light Intensity 4500±10%μW/cm²
ANYCUBIC
Anycubic Photon Mono M5s Pro
- 10.1-inch 14K Mono LCD
- ACF Release Film
- LED matrix UV light source
- Print Speed Up to 105mm/h
- XY Resolution of 16.8*24.8μm
- Wi-Fi Transfer Speeds of 6-10Mbps
- Build Volume of 200x223.78x126.38 mm³
- 4.3-inch Capacitive Touch Screen Controller
- Equipped to Air Heater & Purifier
ANYCUBIC
Anycubic Photon Mono M5s
- Anycubic Photon Mono M5s Resin 3D Printer
- 10.1" monochrome LCD 12K
- Maximum Print Dimmention 200x218x123mm
- Leveling-free Printing Plate
- 4.3" TFT touch-controller
- Light Source LED matrix UV light
- XY Resolution 19*24nm
- Resin Status Detection Sensor
ANYCUBIC
Anycubic Photon Mono 4
- Anycubic Photon Mono 4 Resin 3D Printer
- 7 Inches 10K Monochrome LCD
- Resolution 9024x5120 Pixel
- Xy resolution 17*17μm
- 2.8" Touch Screen Controller
- Light intensity ~3000μW /cm²
- 4-point manual Printing Plate leveling
- LighTurbo Light Source
- Max Printing Volume 153.4*87*165mm
- Layer height 0.03-0.15mm
- Printing Speed up to 70mm/h
ANYCUBIC
Anycubic Photon Mono 4 Ultra
- Anycubic Photon Mono 4 Ultra
- 7 Inches 10K MonoChrome LCD
- XY 17*17μm
- Printing Speed Up to 80-120mm/h
- Priting Volume 153.4*87*165 mm
- COB Light Source
- ACF Release Film
- 4 Point Manual Leveling
- WiFi6 and Lan Connectivity
- 4.3Inch Touch screen controller
- Internal Air Purifier
English
العربية
