Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Availability:
Not available
-
Selections:
New product
-
Brand:
ANYCUBIC
-
Brand:
CREALITY
-
Brand:
ELEGOO
ELEGOO
ELEGOO JUPITER 2 16K
- Large build volume: 302.4 × 161.98 × 300 mm
- 14-inch 16K LCD with 20×26μm XY resolution
- New dual-door design for better accessibility
- Multi-point auto-leveling system for precision
- Quick LCD replacement in just 10 minutes
- Release film replacement in only 10 seconds
- Smart resin feeding and recycling system (2kg tank)
- Heated resin vat for stable printing temperature
- Built-in camera with adaptive lighting and alerts
- Compatible with Elegoo SatelLite slicer software
ANYCUBIC
Anycubic Kobra S1 Max Combo
- Massive 350×350×350 mm³ build volume
- Fully enclosed CoreXY high-speed system
- 65 °C active chamber heating control
- 350 °C hardened steel high-temp nozzle
- Supports up to 16-color multi-printing
- ACE 2 Pro automatic refill and drying
- Prints PLA, ABS, ASA, PC, PA-CF & more
- 600 mm/s max print speed, 20 000 mm/s² accel
- Pressure advance and flow calibration
- Activated-carbon air purification filter
- 4.3″ capacitive touchscreen interface
- AI spaghetti detection & object skip
- 720 p camera for live view & timelapse
- Wi-Fi 6 / LAN / USB smart connectivity
- Power-loss recovery & filament sensor
ELEGOO
ELEGOO Centauri Carbon 2
- 4-Color Printing Module for multi-color models
- RFID auto filament detection and syncing
- Upgraded chamber camera with Wi-Fi monitoring
- CoreXY motion system with 500 mm/s speed
- 20,000 mm/s² high-acceleration printing
- 256×256×256 mm build volume capacity
- Hardened brass-steel nozzle for CF materials
- 320°C nozzle for engineering filaments
- 110°C heated bed for strong first layers
- Supports CF, GF, ABS, PC, PA, ASA, PETG
- Triple Z-screws with linear guide rods
- 121-point auto leveling precision
- Dual-sided PEI flexible build plate
- Silent Drive motors for low noise
- Full-Auto Calibration for easy setup
ANYCUBIC
Anycubic Photon P1 Resin 3D Printer
- Industrial-grade ball screw for ultra-stable motion
- Supports high-viscosity resins up to 8000 cps
- Wave Release tech reduces peel force by 60%
- Precision-milled steel build plate <80 microns
- LCD alignment accuracy below 70 microns
- LighTurbo 4.0 with <2° light collimation
- Over 92% full-screen light uniformity
- Dual-material printing with optional kit
- Resin temperature control up to 40°C
- Intelligent Leveling System 3.0
- Dynamic Release System 3.0
- Light-Off Compensation 3.0
- NFEP film for smooth, consistent curing
- Remote monitoring via built-in camera
- One-click slicing in Photon Workshop 4.0
CREALITY
CREALITY SPARKX i7 COMBO
- CREALITY SPARKX i7 COMBO
- Build Volume: 260×260×255 mm
- Max Speed: ≤500 mm/s
- Acceleration: ≤10000 mm/s²
- Extruder: Direct Drive
- Nozzle System: Quick-Swap Hotend
- Supported Nozzles: 0.2 / 0.4 / 0.6 / 0.8 mm
- Input Shaping + Pressure Advance
- AI Camera: 720p with Smart Detection
- Auto Leveling and Z-Offset Calibration
- Print Surface: Dual-sided PEI Plate
- Compatible Materials: PLA, PETG, TPU, PLA-CF
- Connectivity: Wi-Fi, USB Drive, RS-485
- Storage: 8G EMMC + Creality OS
- CFS Lite / CFS Mini Multicolor Support
English
العربية
