Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Availability:
Available
-
Availability:
Not available
-
Brand:
BAMBU LAB
-
Brand:
FLSUN
-
Brand:
Piocreat
-
Brand:
PRUSA
![]()
BAMBU LAB
Bambu Lab H2D AMS Combo 3D Printer
- Dual-nozzle system for multi-material & multi-color printing
- Maximum print speed up to 600mm/s
- Massive build volume: 350×320×325 mm³
- High-temperature all-metal hotend: up to 350°C
- 65°C actively heated chamber for warp-free printing
- Supports over 20 materials: PLA, ABS, PETG, TPU, PC, PA
- REAL High-Flow Hotend: up to 65mm³/s flow rate
- Intelligent DynaSense Extruder with closed-loop servo control
- Automatic multi-color and multi-filament printing
- Supports up to 16 filaments
- 15-point filament monitoring system for feeding, tip location, tension & flow
- AI and Smart Features
- AI-powered pre-flight checklist
- Built-in cameras: BirdsEye, Nozzle, Toolhead
- Auto bed leveling and Z-offset calibration
- Real-time error detection (clogs, tangles, under-extrusion)
- Power loss recovery & filament runout detection
- Compatible with optional 10W / 40W laser modules
- Compatible with digital cutting blade module
- Compatible with pen plotter tool for writing/drawing
- Quick-swap toolheads with automatic recognition
- Laser Power: 10W or 40W (455nm)
- Engraving area: up to 310×270 mm
- Engraves and cuts wood, acrylic, leather, rubber, and more
- Micro Lidar for 3D mesh generation and Z-height sensing
- Built-in air assist, flame detection, and safety systems
- Digital Cutting & Drawing
- Cutting area: 300×285 mm²
- Blade pressure: 50gf to 600gf
- Supports vinyl, paper, fabric, leather, etc.
BAMBU LAB
Bambu Lab H2S AMS Combo 3D Printer
- Large build volume 340×320×340 mm
- Multi-color printing with AMS 2 Pro
- Supports up to 24 colors & materials
- Optical calibration at 5μm accuracy
- All-metal nozzle with 350°C heat
- Heated chamber up to 65°C
- Automatic filament drying system
- 23 smart sensors & 3 AI cameras
- Print speed up to 1000 mm/s
- Servo motor with 67% more extrusion
- Optional 10W laser cutting module
- Active vibration compensation system
- Sturdy, integrated metal body design
- Ultra-quiet operation under 50 dB
BAMBU LAB
Bambu Lab A1 Combo
- Bambu Lab A1 Combo 3D printer
- Multi-Color Printing With AMS
- Build Volume:256*256*256 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 100℃
- built-in Monitoring camera
BAMBU LAB
Bambu Lab X1-Carbon Combo
- Bambu Lab X1 Carbon COMBO 3D printer
- Equipped with the AMS System
- Build Volume:256×256×256mm
- High quality printing with 7 μm Lidar Resolution
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab A1 mini
- Bambu Lab A1 mini 3D printer
- Build Volume:180*180*180 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 80℃
- built-in Monitoring camera
BAMBU LAB
Bambu Lab P1P
- Bambu Lab P1P 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab P1S Combo
- Bambu Lab P1S 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- Enclosed-body for high-temperature filament printing
- Up to 16-color printing with AMS
- built-in chamber camera
BAMBU LAB
Bambu Lab P1S
- Bambu Lab P1S 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
PRUSA
Prusa MK4 3D Printer
- Prusa MK4 3D Printer 3D Printer
- Build Volume 250x210x220mm
- Print Speed Up to 600 mm/s
- Hotend Max Temp 290 °C
- Build Plate Max Temp 120 °C
- Automatic, Mesh Bed Leveling
- 3.5" Removable Touch Screen Controller
- PEl Magnetic Spring Steel Printing bed
BAMBU LAB
Bambu Lab X1-Carbon
- Bambu Lab X1 Carbon 3D printer
- Build Volume:256×256×256mm
- High quality printing with 7 μm Lidar Resolution
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab X1E
- Bambu Lab X1E 3D printer
- Build Volume:256×256×256mm
- High quality printing with 7 μm Lidar Resolution
- Max Speed : 500mm/s
- Max Hot End Temperature : 320 ℃
- Chamber Control Temperature 60℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab A1 mini Combo
- Bambu Lab A1 mini Combo 3D printer
- Equipped with AMS system
- Build Volume:180*180*180 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 80℃
- built-in Monitoring camera
FLSUN
FLSUN S1
- FLSUN S1 3D Printer
- Max Printing Speed 1200mm/s
- Max Build Volume 320*320*430 mm³
- Printing Control System Microtac Radar
- Fully Automatic Leveling
- Max Nozzle Temp 350℃
- Max Bed Temp 120℃
- Dual-Gear Direct Drive Extruder
- Printing Accuracy 0.1mm
- Layer Height 0.1-0.35mm
FLSUN
FLSUN T1
- FLSUN T1 3D Printer
- Max Printing Speed 1000mm/s
- Max Build Volume ⌀320*430mm
- Ai Printing Quality contorl
- Fully Automatic Leveling
- Max Nozzle Temp 300℃
- Max Bed Temp 110℃
- Dual-Gear Direct Drive Extruder
- Printing Accuracy 0.1mm
- Layer Height 0.1-0.35mm
FLSUN
FLSUN S1 PRO
- FLSUN S1 PRO 3D Printer
- Max Printing Speed 1200mm/s
- Max Build Volume Φ320*430mm
- Fine Printing with FLSUN Algorithms 2.0 and AI Inspection
- Fully Automatic Leveling
- Quieter down to 55dB
- Max Nozzle Temp 350℃
- Max Bed Temp 120℃
- Dual-Gear Direct Drive Extruder
- Printing Accuracy 0.1mm
- Layer Height 0.1-0.35mm
BAMBU LAB
Bambu Lab H2D 3D Printer
- Bambu Lab H2D 3D Printer
- Dual-nozzle printing
- 350×320×325 mm³ print volume
- 350°C nozzle & 65°C chamber heat
- Optional 10W/40W laser module
- Digital cutter and pen support
- 600 mm/s high-speed printing
- AI-powered nozzle and top cameras
- 5μm optical motion calibration
- Servo-controlled DynaSense extruder
- Auto pre-flight check and alignment
BAMBU LAB
Bambu H2D Laser Full Combo
- Bambu H2D Laser Full Combo
- Optional 10W/40W Laser and Cutting Module
- Multi-material 3D Printing
- Dual-nozzle printing
- 350×320×325 mm³ print volume
- 350°C nozzle & 65°C chamber heat
- Optional 10W/40W laser module
- Digital cutter and pen support
- 600 mm/s high-speed printing
- AI-powered nozzle and top cameras
- 5μm optical motion calibration
- Servo-controlled DynaSense extruder
- Auto pre-flight check and alignment
BAMBU LAB
Bambu Lab H2S 3D Printer
- 340×320×340mm³ large build volume
- AI-powered optical motion calibration
- Motion accuracy under 50 microns
- 350°C all-metal hotend for engineering filaments
- 65°C actively heated print chamber
- 23 smart sensors with 3 onboard cameras
- Full-path AI filament monitoring system
- High-speed printing up to 1000 mm/s
- Active vibration compensation technology
- Integrated air filtration & smart venting
- Durable die-cast aluminum frame design
- Cloud & offline control with developer mode
BAMBU LAB
Bambu Lab H2S Laser Full Combo
- Large build volume 340×320×340 mm
- Multi-color printing with AMS 2 Pro
- 10W Laser and Cutting Module
- Supports up to 24 colors & materials
- Optical calibration at 5μm accuracy
- All-metal nozzle with 350°C heat
- Heated chamber up to 65°C
- Automatic filament drying system
- 23 smart sensors & 3 AI cameras
- Print speed up to 1000 mm/s
- Servo motor with 67% more extrusion
- Optional 10W laser cutting module
- Active vibration compensation system
- Sturdy, integrated metal body design
- Ultra-quiet operation under 50 dB
Piocreat
Piocreat HALOT X1 Resin 3D Printer
- Ultra 16K resolution with stunning details
- 10.1-inch advanced monochrome LCD screen
- Pixel size 14 × 19 µm for extreme accuracy
- True leveling-free printing system built-in
- Fast printing speed up to 170 mm per hour
- One-second quick-release build plate design
- Quick-release resin vat for easy handling
- 92-zone intelligent exposure for clarity
- Stable top-down motion with dual rails
- Z-axis accuracy up to 0.01 mm guaranteed
- Smart AFU resin management system built-in
- Supports versatile 405 nm UV printing resin
- Easy file transfer via USB and WiFi options
- 3.98-inch capacitive touchscreen interface
- 3DRAYAN.COM official Piocreat dealer in UAE
BAMBU LAB
Bambu Lab P2S 3D Printer
- 256×256×256 mm build volume for large models
- Print speed up to 600 mm/s with precision
- Multi-color printing with 4 filament support
- 5-inch touchscreen with 2nd-gen smart UI
- PMSM extruder – 70% more extrusion force
- Auto flow dynamics calibration system
- Cold-air cooling for perfect overhangs
- 50°C chamber for engineering materials
- AI-powered error detection & monitoring
- Quick-swap nozzle in under 30 seconds
- Hardened steel nozzle and extruder gear
- AMS 2 Pro with active filament drying
- 1080p camera for live view & timelapse
- Compatible with PLA, ABS, PETG, TPU, CF
BAMBU LAB
Bambu Lab H2C 3D Printer
- Vortek hotend swap with zero color bleed
- Ultra-low purge waste at only 532g
- Up to 24 materials in one print
- Six-color system with support nozzle
- 8-second induction nozzle heating
- 10kg PMSM high-torque extruder
- 50µm ultra-fine motion accuracy
- TPU joints for functional mechanisms
- 65°C active heated chamber
- Triple-stage air filtration system
- Fully automated nozzle calibration
- AI monitoring with multi-camera vision
- 1000mm/s high-speed printing
- Contactless hotend connection design
- Ideal for engineering-grade materials
English
العربية
