Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Availability:
Available
-
Availability:
Not available
-
Brand:
ANYCUBIC
-
Brand:
BAMBU LAB
-
Brand:
ELEGOO
-
Brand:
FLASHFORGE
-
Brand:
PRUSA
-
Brand:
SOVOL
![]()
BAMBU LAB
Bambu Lab H2D AMS Combo 3D Printer
- Dual-nozzle system for multi-material & multi-color printing
- Maximum print speed up to 600mm/s
- Massive build volume: 350×320×325 mm³
- High-temperature all-metal hotend: up to 350°C
- 65°C actively heated chamber for warp-free printing
- Supports over 20 materials: PLA, ABS, PETG, TPU, PC, PA
- REAL High-Flow Hotend: up to 65mm³/s flow rate
- Intelligent DynaSense Extruder with closed-loop servo control
- Automatic multi-color and multi-filament printing
- Supports up to 16 filaments
- 15-point filament monitoring system for feeding, tip location, tension & flow
- AI and Smart Features
- AI-powered pre-flight checklist
- Built-in cameras: BirdsEye, Nozzle, Toolhead
- Auto bed leveling and Z-offset calibration
- Real-time error detection (clogs, tangles, under-extrusion)
- Power loss recovery & filament runout detection
- Compatible with optional 10W / 40W laser modules
- Compatible with digital cutting blade module
- Compatible with pen plotter tool for writing/drawing
- Quick-swap toolheads with automatic recognition
- Laser Power: 10W or 40W (455nm)
- Engraving area: up to 310×270 mm
- Engraves and cuts wood, acrylic, leather, rubber, and more
- Micro Lidar for 3D mesh generation and Z-height sensing
- Built-in air assist, flame detection, and safety systems
- Digital Cutting & Drawing
- Cutting area: 300×285 mm²
- Blade pressure: 50gf to 600gf
- Supports vinyl, paper, fabric, leather, etc.
BAMBU LAB
Bambu Lab H2S AMS Combo 3D Printer
- Large build volume 340×320×340 mm
- Multi-color printing with AMS 2 Pro
- Supports up to 24 colors & materials
- Optical calibration at 5μm accuracy
- All-metal nozzle with 350°C heat
- Heated chamber up to 65°C
- Automatic filament drying system
- 23 smart sensors & 3 AI cameras
- Print speed up to 1000 mm/s
- Servo motor with 67% more extrusion
- Optional 10W laser cutting module
- Active vibration compensation system
- Sturdy, integrated metal body design
- Ultra-quiet operation under 50 dB
BAMBU LAB
Bambu Lab A1 Combo
- Bambu Lab A1 Combo 3D printer
- Multi-Color Printing With AMS
- Build Volume:256*256*256 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 100℃
- built-in Monitoring camera
ELEGOO
ELEGOO Centauri Carbon 3D Printer
- ELEGOO Centauri Carbon 3D Printer
- Build Volume 256×256×256 mm
- Fully enclosed chamber
- Max Printing Speed 500 mm/s
- Support Auto-Leveling
- Layer Thickness 0.1-0.4 mm
- 4.3-inch Capacitive Touch Screen Controller
- Max Hot End Temperature 320 °C
- Max Heated Bed Temperature 110 °C
ANYCUBIC
Anycubic Photon Mono M7 Pro
- Anycubic Photon Mono M7 Pro
- Max Printing Speed 170mm/h
- 10.1'', 14K Mono LCD
- Resolution 13320 * 5120
- 5" IPS Touch Controller
- Auto Resin Refill, Withdrawal
- Auto-Adaptive Technology Control Heating
- Intelligent Workflow-Assist Printing
- Dynamic Temperature Control Resin VAT
ELEGOO
ELEGOO OrangeStorm Giga
- ELEGOO OrangeStorm Giga
- Build Volume 800x800x1000mm
- Printing Speed 300mm/s
- Multi-Nozzle Printing
- Portable 7-inch Controller
- Multi link Printing Plate
- Max Bed Temp 90°C
- Max Extruder Temp 300℃
ANYCUBIC
Anycubic Kobra S1 Combo
- Anycubic Kobra S1 Combo
- Print Volume 250*250*250mm
- Printing Speed up to 600mm/s
- 8 Color 3D Printing
- Ultra-Quiet Printing 33dB
- Compatible with PLA, PETG, TPU，ABS, ASA
- Nozzle temperature 320°C
- Hotbed temperature 120℃
ELEGOO
ELEGOO Saturn 4 Ultra 16K
- Elegoo Saturn 4 Ultra 16K
- Build Volume 211.68*118.37*220
- 10Inch Monochrome LCD 11520*5120
- XY Resolution 19*24um
- Real-Time Monitoring Ai HD Camera
- Layer Thickness 0.01-0.2mm
- Fully Automatic Leveling
- Tilt Release Technology for faster Printing
- Printing Speed up to 150mm/h
- enhance printing by Heating tank
- Wi-Fi File Transfer & Cluster Printing
ANYCUBIC
Anycubic Photon Mono M7 Max
- Anycubic Photon Mono M7 Max
- Resin Auto-Fill Unit
- Build Volume 298x164x300mm
- 13.6 inch monochrome 7K screen
- X/Y Axis Resolution 46*46μm
- LighTurbo 3.0 High-Precision Light Source System
- Maximum print speed op to 86mm/h
- Dynamic temperature control resin vat
- Intelligence Assisted Printing System
- Light Source COB light source+ Fresnel lens
- Light Intensity 4500±10%μW/cm²
ELEGOO
ELEGOO Jupiter SE 6K
- 12.8-inch 6K mono LCD
- PFA Release Film
- Light Source COB light source
- Print Speed Up to 70mm/H
- XY Resolution of 51*51um
- Build Volume of 277.848*156.264*300 mm³
- 3.5-inch Capacitive Touch Screen Controller
ELEGOO
ELEGOO Mars 5 Ultra
- ELEGOO Mars 5 Ultra 3D Printer
- 7-inch 9K Mono LCD
- Printing Speed 150mm/h
- Resolution 8520x4320
- XY Resolution 18x18μm
- Smart Printing with AI Camera
- Automatic Build Plate Leveling
- Layer Thickness 0.01-0.2mm
- 9H Screen Protector
- 4.0-inch Capacitive Touch Screen Controller
- Z-AXIS Accuracy 0.02mm
- Real-Time Monitoring
BAMBU LAB
Bambu Lab X1-Carbon Combo
- Bambu Lab X1 Carbon COMBO 3D printer
- Equipped with the AMS System
- Build Volume:256×256×256mm
- High quality printing with 7 μm Lidar Resolution
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
ANYCUBIC
Anycubic Kobra 3 Combo
- Anycubic Kobra 3 Combo
- With Multi Filament 3D Priting Anycubic Ace Pro
- Max Print Volume 250*250*260mm
- Max Priting Speed 600mm/s
- Max Nozzle Temp 300℃
- Max Bed Temp 100℃
ELEGOO
ELEGOO Saturn 4 Ultra
- ELEGOO Saturn 4 Ultra Resin 3D Printer
- 10" Mono LCD 12K
- Resolution 11520*5120
- XY Resolution 19*24um
- Build Volume 218.88*122.88*220mm
- Layer Thickness 0.01-0.2mm
- Printing Speed 150mm/H
- Printing Technology : MSLA Stereo lithography
- Light Source COB + Fresnel Collimating Lens
- PFA release film
- 4-inch capacitive touch screen Controller
- Real-Time AI Monitoring And Time
- Automatic Build Plate Leveling
ANYCUBIC
Anycubic Photon Mono M5s Pro
- 10.1-inch 14K Mono LCD
- ACF Release Film
- LED matrix UV light source
- Print Speed Up to 105mm/h
- XY Resolution of 16.8*24.8μm
- Wi-Fi Transfer Speeds of 6-10Mbps
- Build Volume of 200x223.78x126.38 mm³
- 4.3-inch Capacitive Touch Screen Controller
- Equipped to Air Heater & Purifier
BAMBU LAB
Bambu Lab A1 mini
- Bambu Lab A1 mini 3D printer
- Build Volume:180*180*180 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 80℃
- built-in Monitoring camera
BAMBU LAB
Bambu Lab P1P
- Bambu Lab P1P 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab P1S Combo
- Bambu Lab P1S 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- Enclosed-body for high-temperature filament printing
- Up to 16-color printing with AMS
- built-in chamber camera
BAMBU LAB
Bambu Lab P1S
- Bambu Lab P1S 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
ELEGOO
ELEGOO Saturn 3 Ultra 12K
- 10-inch 12K Mono LCD
- ACF Release Film
- Light Source COB+Reflective Light Source
- Print Speed Up to 150mm/h
- Linux OS with 4Gb RAM
- XY Resolution of 19×24μm
- Wi-Fi Transfer Speeds of 6-10Mbps
- Build Volume of 218.88×122.88×260 mm³
- 4.0-inch Capacitive Touch Screen Controller
ELEGOO
ELEGOO Mars 3 Ultra 9K
- 7-inch 9K mono LCD
- ACF Release Film
- Light Source COB light source + Fresnel collimating lens
- Print Speed Up to 150mm/h
- Linux OS with 4Gb RAM
- XY Resolution of 18μm
- Wi-Fi Transfer Speeds of 6-10Mbps
- Build Volume of 153.36x77.76x165 mm³
- 4.0-inch Capacitive Touch Screen Controller
ELEGOO
Elegoo Neptune 4 Pro
- Elegoo Neptune 4 PRO 3D Printer
- Build Volume 225*225*265mm
- Print Speed Up to 500 mm/s
- Hotend Max Temp 300 °C
- Build Plate Max Temp 110 °C
- Automatic Levelling over 121 Points
- 4.3" Removable Touch Screen Controller
- Klipper Frimware
- Dual-Drive-Gear Extruder
ANYCUBIC
Anycubic Kobra 2 Max
- Anycubic Kobra 2 Max 3D Printer
- Build Volume 420*420*500mm
- Print Speed Up to 500 mm/s
- Hotend Max Temp 260 °C
- Build Plate Max Temp 90 °C
- Anycubic LeviQ 2.0 Automatic Leveling 49 Points
- 4.3" Removable Touch Screen Controller
- PEl Magnetic Spring Steel Printing bed
PRUSA
Prusa MK4 3D Printer
- Prusa MK4 3D Printer 3D Printer
- Build Volume 250x210x220mm
- Print Speed Up to 600 mm/s
- Hotend Max Temp 290 °C
- Build Plate Max Temp 120 °C
- Automatic, Mesh Bed Leveling
- 3.5" Removable Touch Screen Controller
- PEl Magnetic Spring Steel Printing bed
English
العربية
