Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Categories:
Filamets
-
Categories:
Power Solutions
-
Categories:
Resin
Zoupw
ZOUPW 450 Watt Portable Solar Panel N-Type...
- 450W high-power solar charging output
- 25% efficiency with N-Type 16BB cells
- Premium monocrystalline solar cells
- Excellent low-light performance
- Advanced 16BB cell technology
- Smart bypass diodes for safer use
- Up to 10% better shade performance
- Durable ETFE weatherproof surface
- IP68 protection for outdoor use
- Foldable and lightweight design
- 20% lighter than standard panels
- Strong anodized aluminum frame
- Wide connector compatibility
- Includes cables, bag, and 3-year warranty
eSUN
eSun eTPU-95A
- eSun eTPU-95A Filament
- Flexible and soft
- Sturdy and durable
- Compatible with all of 3D Printers
- Extruder Temp 220-250℃
- Bed Temp 40-60℃
- Printing Speed 50mm/s
- Duribility 90%
PHROZEN
Phrozen Castable Resin W40 Orange
- Phrozen Castable Resin W40 Orange
- 40% wax content
- Low shrinkage, high precision
- No foul/strong odor
- Compatible with 405nm 3D Printers
- XY resolution：0.050 mm
Zoupw
ZOUPW 400 Watt Portable Solar Panel N-Type...
- 400W powerful solar charging output
- 25% conversion efficiency
- Advanced N-Type 16BB solar cells
- Premium monocrystalline cells
- Excellent low-light performance
- Stable output in cloudy weather
- Smart parallel wiring design
- Reinforced adjustable kickstands
- 5000+ fold cycle durability
- ETFE waterproof surface
- IP68 outdoor protection
- Foldable and lightweight build
- Strong anodized aluminum frame
- Wide connector compatibility
- Includes bag, cables, and warranty
ELEGOO
ELEGOO PLA-CF Carbon Fiber
- Carbon fiber reinforced for high strength
- Lightweight with excellent rigidity
- Superior strength-to-weight ratio
- Minimal shrinkage and warping
- High dimensional accuracy
- Smooth matte textured finish
- Reduced visible layer lines
- Easy printing like standard PLA
- Compatible with most FDM printers
- Stable and consistent extrusion
- Ideal for functional prototypes
- Strong bending modulus performance
- Precision fit for assemblies
- 1kg spool with tight winding quality
PHROZEN
Phrozen Castable Resin W20 Green
- Phrozen Castable Resin W20 Green
- 20% wax content
- Low shrinkage, high precision
- No foul/strong odor
- Compatible with 405nm 3D Printers
- XY resolution：0.050 mm
Bluetti
BLUETTI Apex 300 Versatile Power Station
- 2,764.8Wh base battery, expandable to 58kWh
- 3,840W output with 7,680W surge power
- Expandable output up to 11.52kW
- 20ms UPS seamless backup switching
- Industry-first 12kW bypass support
- Up to 19.2kW solar input support
- 2,400W fast solar charging input
- LiFePO₄ battery with 6,000+ cycles
- Up to 17 years battery lifespan
- Smart app control via Wi-Fi & Bluetooth
- Supports home, RV, and off-grid use
- Ultra-low self-consumption design
- Fast AC and generator charging
- Durable compact premium build
- 5-year official BLUETTI warranty
ELEGOO
ELEGOO Rapid PETG
- High-speed printing up to 600 mm/s
- ±0.02 mm precise dimensional accuracy
- Strong impact and tensile strength
- Water and weather resistant material
- Low warping and smooth extrusion
- No clogging and bubble-free printing
- Eco-friendly cardboard spool
- Vacuum sealed with desiccant
- Excellent layer adhesion
- Wide FDM printer compatibility
- Heat formable for post-processing
- Optimized for rapid production
- Durable for outdoor applications
- Balanced PLA ease with ABS strength
ANYCUBIC
Anycubic Water-Wash Resin+
- Water Washable & Slight Odor
- Low Viscosity for Fast Printing
- High Precision with Low Shrinkage
- Density 1.2 g/cm3
- Viscosity 150~250 mPa
- Hardness 80Shore D
- Tensile Strength 30-45MPa
Bluetti
BLUETTI Elite 300 Portable Power Station
- 3,014Wh long-life LiFePO₄ battery
- 2,400W output, 4,800W surge power
- World’s smallest 3kWh power station
- 21% lighter than similar 3kWh units
- 12V/30A DC port for campervan use
- 2,300W ultra-fast AC charging
- Up to 1,200W solar charging input
- Supports combined AC + DC charging
- 10ms UPS instant backup switching
- Bluetooth & Wi-Fi smart app control
- 6,000+ battery cycles to 80%
- Compact and travel-friendly design
- Pass-through charging supported
- 5-year official warranty coverage
CREALITY
Creality CR-Wood Printing Filament
- Natural wood texture with realistic grain look
- Premium wood color for artistic 3D prints
- PLA-based and environmentally friendly material
- Non-toxic and odorless during printing
- Stable printing with low shrinkage rate
- Warp-free performance for flat models
- Smooth feeding with neat filament winding
- Reduced clogging for reliable extrusion
- Easy to print on standard FDM printers
- Wide compatibility with common print beds
- Flexible printing temperature range
- Suitable for decorative and creative projects
- Clean surface finish with wood appearance
- Ideal for crafts, models, and gifts
ANYCUBIC
Anycubic ABS-Like Resin V2
- Anycubic ABS-Like Resin V2
- Water-Washable
- Excellent Toughness
- Durability and Well-Performance
- High Precision Minimal Shrinkage
Zoupw
ZOUPW 350 Watt Portable Solar Panel
- 400W powerful solar charging output
- 25% conversion efficiency
- Advanced N-Type 16BB solar cells
- Premium monocrystalline cells
- Excellent low-light performance
- Stable output in cloudy weather
- Smart parallel wiring design
- Reinforced adjustable kickstands
- 5000+ fold cycle durability
- ETFE waterproof surface
- IP68 outdoor protection
- Foldable and lightweight build
- Strong anodized aluminum frame
- Wide connector compatibility
- Includes bag, cables, and warranty
CREALITY
Creality Hyper PLA RFID 3D Printing Filament
- 10× faster printing, up to 600 mm/s speed
- High-fluidity formula for smooth extrusion
- Rapid cooling for precise high-speed shaping
- Higher tensile strength than ABS
- Tougher and stronger than standard PLA
- Consistent diameter 1.75 mm ±0.03 mm
- Two-way laser diameter measurement
- Neatly spooled to prevent tangling
- Stable extrusion for long print jobs
- Smart RFID for auto filament recognition
- Optimized for Creality high-speed printers
- Premium raw materials with strict QC
ANYCUBIC
Anycubic Standard Resin V2
- Anycubic Standard Resin V2
- Superior Strength and Durability
- Elongation at break 25-30%
- Density 1.05-1.25g/cm³
- Viscosity 250-350 cP·mPa·s
- Hardness 80-83D
- Flexural modulus 1500-2100 MPa
- Resin wash Alcohol
- Exceptional Precision with Minimal Distortion
- High Impact Resistance and Broad Compatibility
ANYCUBIC
Anycubic Tough Resin 2.0
- Anycubic Tough Resin 2.0
- Density 1.10-1.15g/cm³
- Elongation at break 30-50%
- Hardness 76 Shore D
- Viscosity 150-250MPa·s（25℃）
- Heat deflection temp>60-65℃
- Exceptional Toughness & Resistant to Breakage
- Strong Elongation & High Flexibility
- High Precision, Minimal Shrinkage
CREALITY
Creality CR-PLA Carbon 3D Printing Filament
- Carbon-reinforced PLA with high rigidity
- High hardness for durable printed parts
- Non-toxic and odorless during printing
- Environmentally friendly PLA composite
- Smooth feeding and stable extrusion
- Warp-free printing for flat models
- Zero bubbles for clean surface finish
- Precise 1.75mm filament diameter
- Strong layer bonding and stability
- Wide printing temperature range
- Compatible with most FDM printers
- Excellent adhesion on PEI surfaces
- Matte carbon texture hides layer lines
- Ideal for functional 3D applications
CREALITY
Creality Hyper PC Filament 1.75mm 1KG
- Engineering-grade polycarbonate (PC) filament
- Precise 1.75mm diameter with stable tolerance
- Net weight 1KG (2.2 lb) spool
- High tensile strength up to 53.44 MPa
- Excellent flexural strength up to 81.29 MPa
- Ideal for functional and industrial parts
- Recommended nozzle temp 240–260°C
- Heated bed temperature 50–80°C
- Supports printing speeds up to 300mm/s
- Strong X-Y layer adhesion
- Compatible with PEI and carbon plates
- Higher heat resistance than PLA & PETG
- Suitable for high-speed CoreXY printers
- Perfect for prototyping and mechanical parts
ANYCUBIC
Anycubic Tough Resin Ultra
- Anycubic Tough Resin Ultra
- Density 1.05-1.25g/cm³
- Elongation at break 70-80%
- Flexural strength 15-25 MPa
- Hardness 71-75D
- Strong lmpact Resistance
- Flexible with Excellent Rebound
ELEGOO
ELEGOO RAPID PLA Plus Filament
- Ultra-fast printing speed up to 600mm/s
- Enhanced toughness and high tensile strength
- Strong layer adhesion for smooth surfaces
- ±0.02mm high dimensional accuracy
- Tangle-free spools for uninterrupted printing
- Vacuum-sealed to prevent moisture and bubbles
- Eco-friendly biodegradable cardboard spool
- Wide compatibility with 1.75mm FDM printers
- Produces glossy, smooth, high-quality finishes
- Ideal for prototypes, models, and mass printing
PHROZEN
Phrozen Castable Jewelry 3D Printing Resin
- Phrozen Castable Jewelry 3D Printing Resin
- Surface Hardness: 76 Shore D
- Tensile Stress at Break: 25.1 MPa
- Elongation at Break, EAB: 20.63 %
- Notched Izod Impact：28.98 J/m
- Specifically designed for casting
- Low shrinkage, high precision
- No foul/strong odor
- Compatible with 405nm 3D Printers
- XY resolution：0.050 mm
ANYCUBIC
Anycubic High Clear Resin
- Anycubic High Clear Resin
- Density 1.05-1.25g/cm³
- Elongation at break 14.6%
- Hardness 78D
- Tensile strength 28.1 MPa
- Molding shrinkage 3.72-4.24%
- Prevents Yellowing
- Durable and Robust
- Mild Scent and Safe
eSUN
eSun PLA+
- eSun PLA+ 1.75mm Filament
- Enhanced durability and resilience
- Versatile printer compatibility
- Superb layer bonding for optimal prints
- Recommended Printing Temperature: 210 - 230 °C
- Recommended Bed Temperature: 45 - 60°C
- Density 1.23 g/cm3
- Tensile Strength 60MPa
- Elongation at Break 60%
Jamg HE
JAMG HE Water Washable ABS Like Resin
- JAMG HE Water Washable ABS Like Resin
- Fast Curing
- Good Process Performance
- Low Viscosity
- Advantage of improved formulation
- Low Odour And Easy to Clean
CREALITY
Creality Hyper Series PLA
- Creality Hyper Series PLA 1.75mm Filament
- 10x Faster Printing
- Keep Precision While Keeping Ultra-high Speed
- Strengthen Models with Enhanced Toughness
- Recommended Printing Temperature: 190 - 230 °C
- Recommended Bed Temperature: 25 - 60°C
Jamg HE
JAMG HE Gingiva Mask Resin
- JAMG HE Gingiva Mask Resin
- Available in Two Colors
- High Tensile Strength
- Low Odor & Non-Toxic
- Flexibility & Elasticity
- Compatibility with LCD & DLP 3D Printers
eSUN
eSun ePLA-Silk Magic
- eSun ePLA-Silk Magic
- Different Colors at Different Angles
- Extruder Temp 210-230°C
- Bed Temp 45-60°C
- Density 1.256cm3
- Tensil Strength 57.64
- Durability 40%
- Printability 90%
Jamg HE
JAMG HE Dental Castable Resin
- JAMG HE Dental Castable Resin
- High Accurate
- Ideal for make Crown or frame casting
- Ultra low shrinkage
- Ash free for casting
- Compatible Printer: DLP,LCD,SLA
CREALITY
Creality&BASF Ultra Series PLA
- Creality&BASF Ultra Series PLA 1.75mm Filament
- Faster cooling and shaping
- Higher accuracy
- Faster Priting Speed 600mm/s
- Recommended Printing Temperature: 200-230℃
- Recommended Bed Temperature: 25 - 60°C
Jamg HE
JAMG HE Ultra Cast Resin
- JAMG HE Ultra Cast Resin
- Easy printing
- 90% wax resin
- Extremely easy casting
- No casting skill required
Jamg HE
JAMG HE High Wax Plus Resin
- JAMG HE High Wax Plus Resin
- 60% wax resin
- Great performance
- Smooth surface
- Suitable for filigree and diamond jewelry casting
- Weight 1000g
ANYCUBIC
Anycubic PLA Basic
- Anycubic PLA Basic 3D Printer Filament
- Neat Spool and No Tangle
- High Precision and Accuracy
- Eco-Friendly, Biodegradable
Jamg HE
JAMG HE X Cast Resin
- JAMG HE X Cast Resin
- Sutible for jewelry or silver & gold casting
- High detail prints
- Easy cleaning
- Super casting
- Easy to set diamond or stone
- Weight 1000g
ANYCUBIC
Anycubic PLA High Speed
- Anycubic PLA High Speed
- Priting Up to 500mm/s
- Enhanced Fluidity and Better Cooling Effect
Jamg HE
JAMG HE 10K Low Shrinkage Nano Resin
- JAMG HE 10K Low Shrinkage Nano Resin
- Density 1.05-1.25 g/cm3
- Jewelry Silicone Rubber Mold Resin
- Flexural modulus 1.882-2.385Mpa
- Flexural strength 59-70MPa
- Thermal expansion 95*E-6
- Tensile modulus 1.779-2.385 MPa
English
العربية
