Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Categories:
3D Printer
-
Categories:
3D Scanner
-
Categories:
3D Scanner Accs
-
Categories:
Filamets
-
Categories:
Power Solutions
-
Categories:
Resin
Zoupw
ZOUPW 450 Watt Portable Solar Panel N-Type...
- 450W high-power solar charging output
- 25% efficiency with N-Type 16BB cells
- Premium monocrystalline solar cells
- Excellent low-light performance
- Advanced 16BB cell technology
- Smart bypass diodes for safer use
- Up to 10% better shade performance
- Durable ETFE weatherproof surface
- IP68 protection for outdoor use
- Foldable and lightweight design
- 20% lighter than standard panels
- Strong anodized aluminum frame
- Wide connector compatibility
- Includes cables, bag, and 3-year warranty
ELEGOO
ELEGOO Centauri Carbon 2
- 4-Color Printing Module for multi-color models
- RFID auto filament detection and syncing
- Upgraded chamber camera with Wi-Fi monitoring
- CoreXY motion system with 500 mm/s speed
- 20,000 mm/s² high-acceleration printing
- 256×256×256 mm build volume capacity
- Hardened brass-steel nozzle for CF materials
- 320°C nozzle for engineering filaments
- 110°C heated bed for strong first layers
- Supports CF, GF, ABS, PC, PA, ASA, PETG
- Triple Z-screws with linear guide rods
- 121-point auto leveling precision
- Dual-sided PEI flexible build plate
- Silent Drive motors for low noise
- Full-Auto Calibration for easy setup
SHINING 3D
Shining3D Accessories Pro Kit
- Shining3D Accessories Pro Kit
- Magnetic marker balls enhance tracking stability
- Reusable components for flexible scanning setups
- 300mm turntable for precise object rotation
- Ideal for featureless and complex surfaces
- Marker cards and sheets improve scan accuracy
- Fixture columns support small object positioning
SHINING 3D
Shining 3D Einscan Rigil
- Tri-Mode Laser with Hybrid Light Source
- Wireless Operation with Built-in Computing
- 0.04 + 0.06 mm/m Volumetric Accuracy
- Marker-Free Blue Laser Scanning
- 5MP Full Color Texture Camera
- Works Efficiently in Sunlight Outdoors
- Three Flexible Operation Modes
- Dual Camera System for Laser and IR
- High-Speed Scanning up to 4.4M pts/s
- 6.4" AMOLED Touchscreen with Casting
eSUN
eSun eTPU-95A
- eSun eTPU-95A Filament
- Flexible and soft
- Sturdy and durable
- Compatible with all of 3D Printers
- Extruder Temp 220-250℃
- Bed Temp 40-60℃
- Printing Speed 50mm/s
- Duribility 90%
PHROZEN
Phrozen Castable Resin W40 Orange
- Phrozen Castable Resin W40 Orange
- 40% wax content
- Low shrinkage, high precision
- No foul/strong odor
- Compatible with 405nm 3D Printers
- XY resolution：0.050 mm
Zoupw
ZOUPW 400 Watt Portable Solar Panel N-Type...
- 400W powerful solar charging output
- 25% conversion efficiency
- Advanced N-Type 16BB solar cells
- Premium monocrystalline cells
- Excellent low-light performance
- Stable output in cloudy weather
- Smart parallel wiring design
- Reinforced adjustable kickstands
- 5000+ fold cycle durability
- ETFE waterproof surface
- IP68 outdoor protection
- Foldable and lightweight build
- Strong anodized aluminum frame
- Wide connector compatibility
- Includes bag, cables, and warranty
CREALITY
Creality Scanner Reflective Markers
- Dual Sizes: 3mm & 6mm Options
- 400PCS High-Reflective Dots per Pack
- Universal 3D Scanner Compatibility
- Improves Tracking Accuracy
- Ideal for Smooth & Dark Surfaces
- Strong Adhesion, Easy Removal
- Reduces Re-Scanning & Alignment Errors
ELEGOO
ELEGOO PLA-CF Carbon Fiber
- Carbon fiber reinforced for high strength
- Lightweight with excellent rigidity
- Superior strength-to-weight ratio
- Minimal shrinkage and warping
- High dimensional accuracy
- Smooth matte textured finish
- Reduced visible layer lines
- Easy printing like standard PLA
- Compatible with most FDM printers
- Stable and consistent extrusion
- Ideal for functional prototypes
- Strong bending modulus performance
- Precision fit for assemblies
- 1kg spool with tight winding quality
CREALITY
Creality Sermoon X1 3D Scanner
- Creality Sermoon X1 Wireless 3D Scanner
- Multi-Light: 1+7+34 Lasers + 4-Lens NIR
- Ultra Precision: Up to 0.02mm Accuracy
- Fast Scan Speed: Up to 90 FPS
- Huge Scan Range: 5mm to 4000mm Objects
- No Spray Needed: Scans Black & Metal
- Marker-Free for Faces & Large Parts
- Smart AI: Temp Compensation & Tracking
- High Outdoor Tolerance: Up to 100,000 Lux
- Seamless CAD/3D Print Integration
- Compact, Wireless-Ready Design
CREALITY
Creality K2 Plus Combo
- Creality K2 Plus Combo 3D Printer
- Multi Filament 3D Printing With CFS
- Apus Direct Drive Extruder
- Build Volume 350x350x350mm
- Printing Speed Up to 600mm/s
- Max Nozzle Temp 350°C
- Max Bed Temp 120°C
- Ai Pritning Control System
- Fully Automatic Leveling
- Actively heated chamber
- Conectivity RJ45 ethernet, Wifi
PHROZEN
Phrozen Castable Resin W20 Green
- Phrozen Castable Resin W20 Green
- 20% wax content
- Low shrinkage, high precision
- No foul/strong odor
- Compatible with 405nm 3D Printers
- XY resolution：0.050 mm
Bluetti
BLUETTI Apex 300 Versatile Power Station
- 2,764.8Wh base battery, expandable to 58kWh
- 3,840W output with 7,680W surge power
- Expandable output up to 11.52kW
- 20ms UPS seamless backup switching
- Industry-first 12kW bypass support
- Up to 19.2kW solar input support
- 2,400W fast solar charging input
- LiFePO₄ battery with 6,000+ cycles
- Up to 17 years battery lifespan
- Smart app control via Wi-Fi & Bluetooth
- Supports home, RV, and off-grid use
- Ultra-low self-consumption design
- Fast AC and generator charging
- Durable compact premium build
- 5-year official BLUETTI warranty
ELEGOO
ELEGOO Rapid PETG
- High-speed printing up to 600 mm/s
- ±0.02 mm precise dimensional accuracy
- Strong impact and tensile strength
- Water and weather resistant material
- Low warping and smooth extrusion
- No clogging and bubble-free printing
- Eco-friendly cardboard spool
- Vacuum sealed with desiccant
- Excellent layer adhesion
- Wide FDM printer compatibility
- Heat formable for post-processing
- Optimized for rapid production
- Durable for outdoor applications
- Balanced PLA ease with ABS strength
SHINING 3D
Shining3D EINSTAR Rockit
- Scan Speed: 2,800,000 points/s
- Accuracy up to 0.05 mm
- Frame Rate: 90 fps
- Marker-Free Laser Scanning
- True Wireless with Wi-Fi & USB-C
- Battery runtime up to 3 hours
- Works in light up to 110,000 Lux
- RGB 5MP Color Camera
- Supports STL, OBJ, PLY, 3MF, ASC
- Compact design: 425 g, 130×37×61 mm
CREALITY
Creality K2 PRO Combo 3D Printer
- 300×300×300 mm large build volume
- CFS for up to 4-color multi-material printing
- Active air chamber heating system
- Expandable to 16 colors with 4 CFS units
- Equipped with a heated print chamber
- 32GB EMMC File Storage
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy controla
CREALITY
Creality Scan Bridge
- Creality Scan Bridge
- Large Capacity & Fast Charging
- WiFi 6 AX6000 Fast Data Transmission
- Wireless Screen Mirroring
- Magnetic Quick Setup
- Intelligent Power-saving
ANYCUBIC
Anycubic Water-Wash Resin+
- Water Washable & Slight Odor
- Low Viscosity for Fast Printing
- High Precision with Low Shrinkage
- Density 1.2 g/cm3
- Viscosity 150~250 mPa
- Hardness 80Shore D
- Tensile Strength 30-45MPa
Bluetti
BLUETTI Elite 300 Portable Power Station
- 3,014Wh long-life LiFePO₄ battery
- 2,400W output, 4,800W surge power
- World’s smallest 3kWh power station
- 21% lighter than similar 3kWh units
- 12V/30A DC port for campervan use
- 2,300W ultra-fast AC charging
- Up to 1,200W solar charging input
- Supports combined AC + DC charging
- 10ms UPS instant backup switching
- Bluetooth & Wi-Fi smart app control
- 6,000+ battery cycles to 80%
- Compact and travel-friendly design
- Pass-through charging supported
- 5-year official warranty coverage
CREALITY
Creality CR-Wood Printing Filament
- Natural wood texture with realistic grain look
- Premium wood color for artistic 3D prints
- PLA-based and environmentally friendly material
- Non-toxic and odorless during printing
- Stable printing with low shrinkage rate
- Warp-free performance for flat models
- Smooth feeding with neat filament winding
- Reduced clogging for reliable extrusion
- Easy to print on standard FDM printers
- Wide compatibility with common print beds
- Flexible printing temperature range
- Suitable for decorative and creative projects
- Clean surface finish with wood appearance
- Ideal for crafts, models, and gifts
SHINING 3D
Shining3D EINSTAR 2
- Scan speed up to 2,500,000 points/s
- Accuracy up to 0.05 mm
- Max FOV 1170 × 1385 mm
- Lightweight body, only 420 g
- True wireless with 3h battery
- Hybrid light: Blue Laser + IR VCSEL
- No spray required for dark objects
- Works outdoors up to 110,000 Lux
- Full-body scan in just 60 seconds
- Built-in RGB camera for vivid color
CREALITY
Creality K2 Combo 3D Printer
- 260×260×260 mm large build volume
- CFS for up to 4-color multi-material printing
- Expandable to 16 colors with 4 CFS units
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
SHINING 3D
Shining 3D EinScan Industrial Pack
- Shining 3D EinScan Industrial Pack
- Electronic Turntable With Special Markers
- Aluminum Tripod with Ballhead
- Improve 3D scan quality
- Compatible with Einscan & Einstar Series
ANYCUBIC
Anycubic ABS-Like Resin V2
- Anycubic ABS-Like Resin V2
- Water-Washable
- Excellent Toughness
- Durability and Well-Performance
- High Precision Minimal Shrinkage
Zoupw
ZOUPW 350 Watt Portable Solar Panel
- 400W powerful solar charging output
- 25% conversion efficiency
- Advanced N-Type 16BB solar cells
- Premium monocrystalline cells
- Excellent low-light performance
- Stable output in cloudy weather
- Smart parallel wiring design
- Reinforced adjustable kickstands
- 5000+ fold cycle durability
- ETFE waterproof surface
- IP68 outdoor protection
- Foldable and lightweight build
- Strong anodized aluminum frame
- Wide connector compatibility
- Includes bag, cables, and warranty
CREALITY
Creality Hyper PLA RFID 3D Printing Filament
- 10× faster printing, up to 600 mm/s speed
- High-fluidity formula for smooth extrusion
- Rapid cooling for precise high-speed shaping
- Higher tensile strength than ABS
- Tougher and stronger than standard PLA
- Consistent diameter 1.75 mm ±0.03 mm
- Two-way laser diameter measurement
- Neatly spooled to prevent tangling
- Stable extrusion for long print jobs
- Smart RFID for auto filament recognition
- Optimized for Creality high-speed printers
- Premium raw materials with strict QC
CREALITY
Creality K2 Standard 3D Printer
- 260×260×260 mm large build volume
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
Revopoint
Revopoint MetroX 3D Scanner
- Revopoint MetroX 3D Scanner
- Metrology Grade Accuracy up to 0.01 mm
- Scanning Speed Up to 7,000,000 Points/s
- 14 Blue Laser Cross lines Light Source
- 62 lines of blue light fast point cloud creation
- Compatible With Automated Turntable Scan
- 6-AXIS 3D Scanning Stabilizer
- Output formats PLY, OBJ, STL, ASC, 3MF, GLTF, FBX
ANYCUBIC
Anycubic Standard Resin V2
- Anycubic Standard Resin V2
- Superior Strength and Durability
- Elongation at break 25-30%
- Density 1.05-1.25g/cm³
- Viscosity 250-350 cP·mPa·s
- Hardness 80-83D
- Flexural modulus 1500-2100 MPa
- Resin wash Alcohol
- Exceptional Precision with Minimal Distortion
- High Impact Resistance and Broad Compatibility
CREALITY
Creality K2 PRO Standard 3D Printer
- 300×300×300 mm large build volume
- Equipped with a heated print chamber
- 32GB EMMC File Storage
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
SHINING 3D
Shining 3D Einstar VEGA
- Shining 3D Einstar VEGA 3D Scanner
- 6.4'' 2K OLED Touch Screen
- Fully Portable And No need to PC
- High Accuracy 0.05mm
- Working Distance 100~1500mm
- Point Distance 0.05~10mm
- Align Mode Feature; Texture; Markers; Hybrid
- Support Color 3D Scanning
- Light Source Infrared MEMS & VCSEL
- RAM: 32 GB LPDDR4 Memory
- Built-in 5000mAh Battery
- Internal Hard Drive 32GB eMMC + 512GB SSD
- CPU 8-core CPU, 2.4GHz
ANYCUBIC
Anycubic Tough Resin 2.0
- Anycubic Tough Resin 2.0
- Density 1.10-1.15g/cm³
- Elongation at break 30-50%
- Hardness 76 Shore D
- Viscosity 150-250MPa·s（25℃）
- Heat deflection temp>60-65℃
- Exceptional Toughness & Resistant to Breakage
- Strong Elongation & High Flexibility
- High Precision, Minimal Shrinkage
CREALITY
Creality CR-PLA Carbon 3D Printing Filament
- Carbon-reinforced PLA with high rigidity
- High hardness for durable printed parts
- Non-toxic and odorless during printing
- Environmentally friendly PLA composite
- Smooth feeding and stable extrusion
- Warp-free printing for flat models
- Zero bubbles for clean surface finish
- Precise 1.75mm filament diameter
- Strong layer bonding and stability
- Wide printing temperature range
- Compatible with most FDM printers
- Excellent adhesion on PEI surfaces
- Matte carbon texture hides layer lines
- Ideal for functional 3D applications
FLASHFORGE
FlashForge Creator 5 PRO 3D Printer
- Fully enclosed chamber for stable printing
- Quad independent toolheads (4 nozzles)
- Up to 500% faster print performance
- Max travel speed: 600 mm/s
- Acceleration up to 30,000 mm/s²
- Near-zero purge waste technology
- FlashSwap multi-nozzle system
- Build volume: 256 × 256 × 256 mm
- Max nozzle temp: 320°C
- Heated bed up to 120°C
- Multi-material & multi-color printing
- Auto leveling & flow calibration
- Full HD camera remote monitoring
- WiFi, LAN & USB connectivity
English
العربية
