Home

Creality Hyper PLA RFID Veri Peri Dubai.Abu Dhabi.UAE

New

CREALITY Creality Hyper PLA RFID 3D Printing Filament

10× faster printing, up to 600 mm/s speed
High-fluidity formula for smooth extrusion
Rapid cooling for precise high-speed shaping
Higher tensile strength than ABS
Tougher and stronger than standard PLA
Consistent diameter 1.75 mm ±0.03 mm
Two-way laser diameter measurement
Neatly spooled to prevent tangling
Stable extrusion for long print jobs
Smart RFID for auto filament recognition
Optimized for Creality high-speed printers
Premium raw materials with strict QC

AED73.50

ELEGOO Centauri Carbon 2 Dubai.Abu Dhabi.UAE

-10%
New

ELEGOO ELEGOO Centauri Carbon 2

4-Color Printing Module for multi-color models
RFID auto filament detection and syncing
Upgraded chamber camera with Wi-Fi monitoring
CoreXY motion system with 500 mm/s speed
20,000 mm/s² high-acceleration printing
256×256×256 mm build volume capacity
Hardened brass-steel nozzle for CF materials
320°C nozzle for engineering filaments
110°C heated bed for strong first layers
Supports CF, GF, ABS, PC, PA, ASA, PETG
Triple Z-screws with linear guide rods
121-point auto leveling precision
Dual-sided PEI flexible build plate
Silent Drive motors for low noise
Full-Auto Calibration for easy setup

AED2,969.10 AED3,299.00

Out-of-Stock

PHROZEN Phrozen Castable Resin W40 Orange

Phrozen Castable Resin W40 Orange
40% wax content
Low shrinkage, high precision
No foul/strong odor
Compatible with 405nm 3D Printers
XY resolution：0.050 mm

AED480.00

ELEGOO RAPID PLA Plus Black Dubai Abu Dhabi UAE

ELEGOO ELEGOO RAPID PLA Plus Filament

Ultra-fast printing speed up to 600mm/s
Enhanced toughness and high tensile strength
Strong layer adhesion for smooth surfaces
±0.02mm high dimensional accuracy
Tangle-free spools for uninterrupted printing
Vacuum-sealed to prevent moisture and bubbles
Eco-friendly biodegradable cardboard spool
Wide compatibility with 1.75mm FDM printers
Produces glossy, smooth, high-quality finishes
Ideal for prototypes, models, and mass printing

AED89.00

Creality K2 Plus Combo Dubai Abu Dhabi UAE

Out-of-Stock

CREALITY Creality K2 Plus Combo

Creality K2 Plus Combo 3D Printer
Multi Filament 3D Printing With CFS
Apus Direct Drive Extruder
Build Volume 350x350x350mm
Printing Speed Up to 600mm/s
Max Nozzle Temp 350°C
Max Bed Temp 120°C
Ai Pritning Control System
Fully Automatic Leveling
Actively heated chamber
Conectivity RJ45 ethernet, Wifi

AED6,990.00

Out-of-Stock

PHROZEN Phrozen Castable Resin W20 Green

Phrozen Castable Resin W20 Green
20% wax content
Low shrinkage, high precision
No foul/strong odor
Compatible with 405nm 3D Printers
XY resolution：0.050 mm

AED480.00

Creality K2 PRO Combo Dubai.Abu Dhabi.UAE

CREALITY Creality K2 PRO Combo 3D Printer

300×300×300 mm large build volume
CFS for up to 4-color multi-material printing
Active air chamber heating system
Expandable to 16 colors with 4 CFS units
Equipped with a heated print chamber
32GB EMMC File Storage
Max nozzle temp 300°C for advanced filaments
Hardened steel nozzle, 40 mm³/s flow rate
Speeds up to 600 mm/s, 20,000 mm/s² accel
Intelligent auto bed leveling system
Dual AI cameras for live monitoring
Steel linear rail for smooth, durable motion
4-inch color touchscreen for easy controla

AED3,999.00

Anycubic Water-Wash Resin+ Dubai Abu Dhabi UAE

Out-of-Stock

ANYCUBIC Anycubic Water-Wash Resin+

Water Washable & Slight Odor
Low Viscosity for Fast Printing
High Precision with Low Shrinkage
Density 1.2 g/cm3
Viscosity 150~250 mPa
Hardness 80Shore D
Tensile Strength 30-45MPa

AED125.00

Out-of-Stock

eSUN eSun PLA+

eSun PLA+ 1.75mm Filament
Enhanced durability and resilience
Versatile printer compatibility
Superb layer bonding for optimal prints
Recommended Printing Temperature: 210 - 230 °C
Recommended Bed Temperature: 45 - 60°C
Density 1.23 g/cm3
Tensile Strength 60MPa
Elongation at Break 60%

AED70.00

CREALITY Creality K2 Combo 3D Printer

260×260×260 mm large build volume
CFS for up to 4-color multi-material printing
Expandable to 16 colors with 4 CFS units
Max nozzle temp 300°C for advanced filaments
Hardened steel nozzle, 40 mm³/s flow rate
Speeds up to 600 mm/s, 20,000 mm/s² accel
Intelligent auto bed leveling system
Dual AI cameras for live monitoring
Steel linear rail for smooth, durable motion
4-inch color touchscreen for easy control

AED3,250.00

Anycubic ABS-Like Resin V2 Dubai Abu Dhabi UAE

Out-of-Stock

ANYCUBIC Anycubic ABS-Like Resin V2

Anycubic ABS-Like Resin V2
Water-Washable
Excellent Toughness
Durability and Well-Performance
High Precision Minimal Shrinkage

AED205.00

Out-of-Stock

CREALITY Creality Hyper Series PLA

Creality Hyper Series PLA 1.75mm Filament
10x Faster Printing
Keep Precision While Keeping Ultra-high Speed
Strengthen Models with Enhanced Toughness
Recommended Printing Temperature: 190 - 230 °C
Recommended Bed Temperature: 25 - 60°C

AED92.00

Creality K2 Standard Dubai.Abu Dhabi.UAE

CREALITY Creality K2 Standard 3D Printer

260×260×260 mm large build volume
Max nozzle temp 300°C for advanced filaments
Hardened steel nozzle, 40 mm³/s flow rate
Speeds up to 600 mm/s, 20,000 mm/s² accel
Intelligent auto bed leveling system
Dual AI cameras for live monitoring
Steel linear rail for smooth, durable motion
4-inch color touchscreen for easy control

AED2,599.00

Anycubic Standard Resin V2 Dubai Abu Dhabi UAE

Out-of-Stock

ANYCUBIC Anycubic Standard Resin V2

Anycubic Standard Resin V2
Superior Strength and Durability
Elongation at break 25-30%
Density 1.05-1.25g/cm³
Viscosity 250-350 cP·mPa·s
Hardness 80-83D
Flexural modulus 1500-2100 MPa
Resin wash Alcohol
Exceptional Precision with Minimal Distortion
High Impact Resistance and Broad Compatibility

AED180.00

eSun ePLA-Silk Magic Dubai Abu Dhabi UAE

Out-of-Stock

eSUN eSun ePLA-Silk Magic

eSun ePLA-Silk Magic
Different Colors at Different Angles
Extruder Temp 210-230°C
Bed Temp 45-60°C
Density 1.256cm3
Tensil Strength 57.64
Durability 40%
Printability 90%

AED125.00

Creality K2 PRO Standard 3D Printer DUBAI Abu DHABI UAE

CREALITY Creality K2 PRO Standard 3D Printer

300×300×300 mm large build volume
Equipped with a heated print chamber
32GB EMMC File Storage
Max nozzle temp 300°C for advanced filaments
Hardened steel nozzle, 40 mm³/s flow rate
Speeds up to 600 mm/s, 20,000 mm/s² accel
Intelligent auto bed leveling system
Dual AI cameras for live monitoring
Steel linear rail for smooth, durable motion
4-inch color touchscreen for easy control

AED3,790.00

Anycubic Tough Resin 2.0 Dubai Abu Dhabi UAE

Out-of-Stock

ANYCUBIC Anycubic Tough Resin 2.0

Anycubic Tough Resin 2.0
Density 1.10-1.15g/cm³
Elongation at break 30-50%
Hardness 76 Shore D
Viscosity 150-250MPa·s（25℃）
Heat deflection temp>60-65℃
Exceptional Toughness & Resistant to Breakage
Strong Elongation & High Flexibility
High Precision, Minimal Shrinkage

AED199.00

Creality&BASF Ultra Series PLA Dubai Abu Dhabi UAE

Out-of-Stock

CREALITY Creality&BASF Ultra Series PLA

Creality&BASF Ultra Series PLA 1.75mm Filament
Faster cooling and shaping
Higher accuracy
Faster Priting Speed 600mm/s
Recommended Printing Temperature: 200-230℃
Recommended Bed Temperature: 25 - 60°C

AED99.00

CREALITY Creality Hi Combo

Creality Hi Combo 3D Printer
Support Multicolor 3D Printing
Build Volume 260×260×300mm
Printing Speed up to 500mm/s
Max Nozzle Temperature ≤ 300 ℃
Max Heatbed Temperature ≤ 100 ℃
Full-auto leveling
3.2" color touch screen
Built-in Sensor to Read Filament Info
All-metal Body
Monitoring Camera with a Privacy Cap

AED1,999.00

Anycubic Tough Resin Ultra Dubai Abu Dhabi UAE

Out-of-Stock

ANYCUBIC Anycubic Tough Resin Ultra

Anycubic Tough Resin Ultra
Density 1.05-1.25g/cm³
Elongation at break 70-80%
Flexural strength 15-25 MPa
Hardness 71-75D
Strong lmpact Resistance
Flexible with Excellent Rebound

AED199.00

Bambu Lab PLA Basic RED Dubai Abu Dhabi UAE

Out-of-Stock

BAMBU LAB Bambu Lab PLA Basic

AED135.00

CREALITY SPARKX i7 COMBO Dubai Abu Dhabi UAE

New
Out-of-Stock

CREALITY CREALITY SPARKX i7 COMBO

CREALITY SPARKX i7 COMBO
Build Volume: 260×260×255 mm
Max Speed: ≤500 mm/s
Acceleration: ≤10000 mm/s²
Extruder: Direct Drive
Nozzle System: Quick-Swap Hotend
Supported Nozzles: 0.2 / 0.4 / 0.6 / 0.8 mm
Input Shaping + Pressure Advance
AI Camera: 720p with Smart Detection
Auto Leveling and Z-Offset Calibration
Print Surface: Dual-sided PEI Plate
Compatible Materials: PLA, PETG, TPU, PLA-CF
Connectivity: Wi-Fi, USB Drive, RS-485
Storage: 8G EMMC + Creality OS
CFS Lite / CFS Mini Multicolor Support

Phrozen Castable Jewelry 3D Printing Resin Dubai.Abu Dhabi.UAE

Out-of-Stock

PHROZEN Phrozen Castable Jewelry 3D Printing Resin

Phrozen Castable Jewelry 3D Printing Resin
Surface Hardness: 76 Shore D
Tensile Stress at Break: 25.1 MPa
Elongation at Break, EAB: 20.63 %
Notched Izod Impact：28.98 J/m
Specifically designed for casting
Low shrinkage, high precision
No foul/strong odor
Compatible with 405nm 3D Printers
XY resolution：0.050 mm

AED499.00

Out-of-Stock

ANYCUBIC Anycubic PLA Basic

Anycubic PLA Basic 3D Printer Filament
Neat Spool and No Tangle
High Precision and Accuracy
Eco-Friendly, Biodegradable

AED85.00

shop by category

Home

Left Banner

New products

New products

Home

Contact us

Products

Our company

Information

Trending Category

shop by category

Home  

Left Banner  

New products

New products  

Home

Home

Left Banner

New products