• 450W high-power solar charging output
• 25% efficiency with N-Type 16BB cells
• Premium monocrystalline solar cells
• Excellent low-light performance
• Advanced 16BB cell technology
• Smart bypass diodes for safer use
• Up to 10% better shade performance
• Durable ETFE weatherproof surface
• IP68 protection for outdoor use
• Foldable and lightweight design
• 20% lighter than standard panels
• Strong anodized aluminum frame
• Wide connector compatibility
• Includes cables, bag, and 3-year warranty

• 4-Color Printing Module for multi-color models
• RFID auto filament detection and syncing
• Upgraded chamber camera with Wi-Fi monitoring
• CoreXY motion system with 500 mm/s speed
• 20,000 mm/s² high-acceleration printing
• 256×256×256 mm build volume capacity
• Hardened brass-steel nozzle for CF materials
• 320°C nozzle for engineering filaments
• 110°C heated bed for strong first layers
• Supports CF, GF, ABS, PC, PA, ASA, PETG
• Triple Z-screws with linear guide rods
• 121-point auto leveling precision
• Dual-sided PEI flexible build plate
• Silent Drive motors for low noise
• Full-Auto Calibration for easy setup

• eSun eTPU-95A Filament
• Flexible and soft
• Sturdy and durable
• Compatible with all of 3D Printers
• Extruder Temp 220-250℃
• Bed Temp 40-60℃
• Printing Speed 50mm/s
• Duribility 90%

• 400W powerful solar charging output
• 25% conversion efficiency
• Advanced N-Type 16BB solar cells
• Premium monocrystalline cells
• Excellent low-light performance
• Stable output in cloudy weather
• Smart parallel wiring design
• Reinforced adjustable kickstands
• 5000+ fold cycle durability
• ETFE waterproof surface
• IP68 outdoor protection
• Foldable and lightweight build
• Strong anodized aluminum frame
• Wide connector compatibility
• Includes bag, cables, and warranty

• Carbon fiber reinforced for high strength
• Lightweight with excellent rigidity
• Superior strength-to-weight ratio
• Minimal shrinkage and warping
• High dimensional accuracy
• Smooth matte textured finish
• Reduced visible layer lines
• Easy printing like standard PLA
• Compatible with most FDM printers
• Stable and consistent extrusion
• Ideal for functional prototypes
• Strong bending modulus performance
• Precision fit for assemblies
• 1kg spool with tight winding quality

• Creality K2 Plus Combo 3D Printer
• Multi Filament 3D Printing With CFS
•  Apus Direct Drive Extruder​
• Build Volume 350x350x350mm
• Printing Speed Up to 600mm/s
• Max Nozzle Temp 350°C
• Max Bed Temp 120°C
• Ai Pritning Control System
• Fully Automatic Leveling
• Actively heated chamber
• Conectivity RJ45 ethernet, Wifi

• 2,764.8Wh base battery, expandable to 58kWh
• 3,840W output with 7,680W surge power
• Expandable output up to 11.52kW
• 20ms UPS seamless backup switching
• Industry-first 12kW bypass support
• Up to 19.2kW solar input support
• 2,400W fast solar charging input
• LiFePO₄ battery with 6,000+ cycles
• Up to 17 years battery lifespan
• Smart app control via Wi-Fi & Bluetooth
• Supports home, RV, and off-grid use
• Ultra-low self-consumption design
• Fast AC and generator charging
• Durable compact premium build
• 5-year official BLUETTI warranty

• High-speed printing up to 600 mm/s
• ±0.02 mm precise dimensional accuracy
• Strong impact and tensile strength
• Water and weather resistant material
• Low warping and smooth extrusion
• No clogging and bubble-free printing
• Eco-friendly cardboard spool
• Vacuum sealed with desiccant
• Excellent layer adhesion
• Wide FDM printer compatibility
• Heat formable for post-processing
• Optimized for rapid production
• Durable for outdoor applications
• Balanced PLA ease with ABS strength

• 300×300×300 mm large build volume
• CFS for up to 4-color multi-material printing
• Active air chamber heating system
• Expandable to 16 colors with 4 CFS units
• Equipped with a heated print chamber
• 32GB EMMC File Storage
• Max nozzle temp 300°C for advanced filaments
• Hardened steel nozzle, 40 mm³/s flow rate
• Speeds up to 600 mm/s, 20,000 mm/s² accel
• Intelligent auto bed leveling system
• Dual AI cameras for live monitoring
• Steel linear rail for smooth, durable motion
• 4-inch color touchscreen for easy controla

• 3,014Wh long-life LiFePO₄ battery
• 2,400W output, 4,800W surge power
• World’s smallest 3kWh power station
• 21% lighter than similar 3kWh units
• 12V/30A DC port for campervan use
• 2,300W ultra-fast AC charging
• Up to 1,200W solar charging input
• Supports combined AC + DC charging
• 10ms UPS instant backup switching
• Bluetooth & Wi-Fi smart app control
• 6,000+ battery cycles to 80%
• Compact and travel-friendly design
• Pass-through charging supported
• 5-year official warranty coverage

• Natural wood texture with realistic grain look
• Premium wood color for artistic 3D prints
• PLA-based and environmentally friendly material
• Non-toxic and odorless during printing
• Stable printing with low shrinkage rate
• Warp-free performance for flat models
• Smooth feeding with neat filament winding
• Reduced clogging for reliable extrusion
• Easy to print on standard FDM printers
• Wide compatibility with common print beds
• Flexible printing temperature range
• Suitable for decorative and creative projects
• Clean surface finish with wood appearance
• Ideal for crafts, models, and gifts

• 260×260×260 mm large build volume
• CFS for up to 4-color multi-material printing
• Expandable to 16 colors with 4 CFS units
• Max nozzle temp 300°C for advanced filaments
• Hardened steel nozzle, 40 mm³/s flow rate
• Speeds up to 600 mm/s, 20,000 mm/s² accel
• Intelligent auto bed leveling system
• Dual AI cameras for live monitoring
• Steel linear rail for smooth, durable motion
• 4-inch color touchscreen for easy control

• 400W powerful solar charging output
• 25% conversion efficiency
• Advanced N-Type 16BB solar cells
• Premium monocrystalline cells
• Excellent low-light performance
• Stable output in cloudy weather
• Smart parallel wiring design
• Reinforced adjustable kickstands
• 5000+ fold cycle durability
• ETFE waterproof surface
• IP68 outdoor protection
• Foldable and lightweight build
• Strong anodized aluminum frame
• Wide connector compatibility
• Includes bag, cables, and warranty

• 10× faster printing, up to 600 mm/s speed
• High-fluidity formula for smooth extrusion
• Rapid cooling for precise high-speed shaping
• Higher tensile strength than ABS
• Tougher and stronger than standard PLA
• Consistent diameter 1.75 mm ±0.03 mm
• Two-way laser diameter measurement
• Neatly spooled to prevent tangling
• Stable extrusion for long print jobs
• Smart RFID for auto filament recognition
• Optimized for Creality high-speed printers
• Premium raw materials with strict QC

• 260×260×260 mm large build volume
• Max nozzle temp 300°C for advanced filaments
• Hardened steel nozzle, 40 mm³/s flow rate
• Speeds up to 600 mm/s, 20,000 mm/s² accel
• Intelligent auto bed leveling system
• Dual AI cameras for live monitoring
• Steel linear rail for smooth, durable motion
• 4-inch color touchscreen for easy control

• 300×300×300 mm large build volume
• Equipped with a heated print chamber
• 32GB EMMC File Storage
• Max nozzle temp 300°C for advanced filaments
• Hardened steel nozzle, 40 mm³/s flow rate
• Speeds up to 600 mm/s, 20,000 mm/s² accel
• Intelligent auto bed leveling system
• Dual AI cameras for live monitoring
• Steel linear rail for smooth, durable motion
• 4-inch color touchscreen for easy control

• Carbon-reinforced PLA with high rigidity
• High hardness for durable printed parts
• Non-toxic and odorless during printing
• Environmentally friendly PLA composite
• Smooth feeding and stable extrusion
• Warp-free printing for flat models
• Zero bubbles for clean surface finish
• Precise 1.75mm filament diameter
• Strong layer bonding and stability
• Wide printing temperature range
• Compatible with most FDM printers
• Excellent adhesion on PEI surfaces
• Matte carbon texture hides layer lines
• Ideal for functional 3D applications

• Fully enclosed chamber for stable printing
• Quad independent toolheads (4 nozzles)
• Up to 500% faster print performance
• Max travel speed: 600 mm/s
• Acceleration up to 30,000 mm/s²
• Near-zero purge waste technology
• FlashSwap multi-nozzle system
• Build volume: 256 × 256 × 256 mm
• Max nozzle temp: 320°C
• Heated bed up to 120°C
• Multi-material & multi-color printing
• Auto leveling & flow calibration
• Full HD camera remote monitoring
• WiFi, LAN & USB connectivity

• Engineering-grade polycarbonate (PC) filament
• Precise 1.75mm diameter with stable tolerance
• Net weight 1KG (2.2 lb) spool
• High tensile strength up to 53.44 MPa
• Excellent flexural strength up to 81.29 MPa
• Ideal for functional and industrial parts
• Recommended nozzle temp 240–260°C
• Heated bed temperature 50–80°C
• Supports printing speeds up to 300mm/s
• Strong X-Y layer adhesion
• Compatible with PEI and carbon plates
• Higher heat resistance than PLA & PETG
• Suitable for high-speed CoreXY printers
• Perfect for prototyping and mechanical parts

• Quad independent toolheads (4 nozzles)
• Up to 500% faster printing speed
• Max travel speed: 600 mm/s
• Acceleration up to 30,000 mm/s²
• Near-zero purge waste technology
• FlashSwap multi-nozzle system
• Build volume: 256 × 256 × 256 mm
• Max nozzle temp: 320°C
• Heated bed up to 120°C
• Multi-material & multi-color printing
• Auto leveling & flow calibration
• Full HD camera for monitoring
• WiFi, LAN & USB connectivity
• PEI flexible steel build plate
• Supports engineering-grade filaments

• Ultra-fast printing speed up to 600mm/s
• Enhanced toughness and high tensile strength
• Strong layer adhesion for smooth surfaces
• ±0.02mm high dimensional accuracy
• Tangle-free spools for uninterrupted printing
• Vacuum-sealed to prevent moisture and bubbles
• Eco-friendly biodegradable cardboard spool
• Wide compatibility with 1.75mm FDM printers
• Produces glossy, smooth, high-quality finishes
• Ideal for prototypes, models, and mass printing

• True 4-color intelligent printing
• Max speed up to 600 mm/s
• Acceleration up to 20000 mm/s²
• Auto filament switching system
• 99% power-loss recovery
• Quick-release nozzle design
• Nozzle options: 0.25–0.8 mm
• Core XY stable motion system
• Multi-material compatibility
• 4.3-inch full touch display
• Build volume 220×220×220 mm
• Max bed temp up to 110°C
• WIFI, Ethernet, USB connectivity
• Supports Prusa/Cura/Orca slicers
• Compact 363×363×413 mm body

• eSun PLA+ 1.75mm Filament
• Enhanced durability and resilience
• Versatile printer compatibility
• Superb layer bonding for optimal prints
• Recommended Printing Temperature: 210 - 230 °C
• Recommended Bed Temperature: 45 - 60°C
• Density 1.23 g/cm3
• Tensile Strength 60MPa
• Elongation at Break 60%

• Creality Hi Combo 3D Printer
• Support Multicolor 3D Printing
• Build Volume 260×260×300mm
• Printing Speed up to 500mm/s
• Max Nozzle Temperature ≤ 300 ℃
• Max Heatbed Temperature ≤ 100 ℃
• Full-auto leveling
• 3.2" color touch screen
• Built-in Sensor to Read Filament Info
• All-metal Body
• Monitoring Camera with a Privacy Cap

• Creality Hyper Series PLA 1.75mm Filament
• 10x Faster Printing
• Keep Precision While Keeping Ultra-high Speed
• Strengthen Models with Enhanced Toughness
• Recommended Printing Temperature: 190 - 230 °C
• Recommended Bed Temperature: 25 - 60°C

• CREALITY SPARKX i7 COMBO
• Build Volume: 260×260×255 mm
• Max Speed: ≤500 mm/s
• Acceleration: ≤10000 mm/s²
• Extruder: Direct Drive
• Nozzle System: Quick-Swap Hotend
• Supported Nozzles: 0.2 / 0.4 / 0.6 / 0.8 mm
• Input Shaping + Pressure Advance
• AI Camera: 720p with Smart Detection
• Auto Leveling and Z-Offset Calibration
• Print Surface: Dual-sided PEI Plate
• Compatible Materials: PLA, PETG, TPU, PLA-CF
• Connectivity: Wi-Fi, USB Drive, RS-485
• Storage: 8G EMMC + Creality OS
• CFS Lite / CFS Mini Multicolor Support

• eSun ePLA-Silk Magic
• Different Colors at Different Angles
• Extruder Temp 210-230°C
• Bed Temp 45-60°C
• Density 1.256cm3
• Tensil Strength 57.64
• Durability 40%
• Printability 90%

• Native 4-Color Printing System
• 260×260×260 mm³ Build Volume
• Expandable Up to 19 Colors
• ACE GEN 2 Multicolor Technology
• 81.25% Less Filament Change Waste
• 300 mm/s Default Print Speed
• 600 mm/s Maximum Print Speed
• 20,000 mm/s² Max Acceleration
• LeviQ 3.0 49-Point Auto-Leveling
• Direct Drive Extruder System
• Supports PLA, PETG, TPU, ASA
• AI Spaghetti & Object Detection
• 720P Camera for Live Monitoring
• Ultra-Quiet Operation ≤48 dB

• Creality&BASF Ultra Series PLA 1.75mm Filament
• Faster cooling and shaping
• Higher accuracy
• Faster Priting Speed 600mm/s
• Recommended Printing Temperature: 200-230℃
• Recommended Bed Temperature: 25 - 60°C

• Anycubic Kobra 3 MAX
• With Multi Filament 3D Priting Anycubic Ace Pro
• Max Print Volume 425*425*500mm
• Max Priting Speed 600mm/s
• Max Nozzle Temp 300℃
• Max Bed Temp 110℃
• Vibration Compensation System

• Creality Ender-5 Max Full Kit
• With Encloser Box
• Enormous 400×400×400mm Build volume
• Ultra Fast Printing 700 mm/s
• die-cast aluminum alloy frame
• 36-point auto leveling
• Printing Accuracy 100±0.1 mm
• Layer Height 0.05-0.3 mm
• Max Nozzle Temperature ≤ 300 ℃
• Max Heatbed Temperature ≤ 100 ℃

• Anycubic PLA Basic 3D Printer Filament
• Neat Spool and No Tangle
• High Precision and Accuracy
• Eco-Friendly, Biodegradable

• Creality Ender-5 Max 3D Printer
• Enormous 400×400×400mm Build volume
• Ultra Fast Printing 700 mm/s
• die-cast aluminum alloy frame
• 36-point auto leveling
• Printing Accuracy 100±0.1 mm
• Layer Height 0.05-0.3 mm
• Max Nozzle Temperature ≤ 300 ℃
• Max Heatbed Temperature ≤ 100 ℃

• Anycubic PLA High Speed
• Priting Up to 500mm/s
• Enhanced Fluidity and Better Cooling Effect

• Anycubic PLA Silk Filament
• Silk Feel and Lustre
• Eco-Friendly, Biodegradable
• Widely Applicable to Printers