Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Categories:
3D Printer
-
Categories:
Filamets
-
Brand:
ANYCUBIC
-
Brand:
HeyGears
ANYCUBIC
Anycubic Photon Mono M7 Pro
- Anycubic Photon Mono M7 Pro
- Max Printing Speed 170mm/h
- 10.1'', 14K Mono LCD
- Resolution 13320 * 5120
- 5" IPS Touch Controller
- Auto Resin Refill, Withdrawal
- Auto-Adaptive Technology Control Heating
- Intelligent Workflow-Assist Printing
- Dynamic Temperature Control Resin VAT
ANYCUBIC
Anycubic Kobra S1 Combo
- Anycubic Kobra S1 Combo
- Print Volume 250*250*250mm
- Printing Speed up to 600mm/s
- 8 Color 3D Printing
- Ultra-Quiet Printing 33dB
- Compatible with PLA, PETG, TPU，ABS, ASA
- Nozzle temperature 320°C
- Hotbed temperature 120℃
ANYCUBIC
Anycubic PLA Basic
- Anycubic PLA Basic 3D Printer Filament
- Neat Spool and No Tangle
- High Precision and Accuracy
- Eco-Friendly, Biodegradable
ANYCUBIC
Anycubic Photon Mono M7 Max
- Anycubic Photon Mono M7 Max
- Resin Auto-Fill Unit
- Build Volume 298x164x300mm
- 13.6 inch monochrome 7K screen
- X/Y Axis Resolution 46*46μm
- LighTurbo 3.0 High-Precision Light Source System
- Maximum print speed op to 86mm/h
- Dynamic temperature control resin vat
- Intelligence Assisted Printing System
- Light Source COB light source+ Fresnel lens
- Light Intensity 4500±10%μW/cm²
ANYCUBIC
Anycubic PLA High Speed
- Anycubic PLA High Speed
- Priting Up to 500mm/s
- Enhanced Fluidity and Better Cooling Effect
ANYCUBIC
Anycubic PLA Silk
- Anycubic PLA Silk Filament
- Silk Feel and Lustre
- Eco-Friendly, Biodegradable
- Widely Applicable to Printers
ANYCUBIC
Anycubic PLA+
- Anycubic PLA+ 3D Pinter Filament
- High Toughness
- High precision and minimal shrinkage
- Eco-Friendly
- Compatible with all of FDM 3D Printer
ANYCUBIC
Anycubic Kobra 3 Combo
- Anycubic Kobra 3 Combo
- With Multi Filament 3D Priting Anycubic Ace Pro
- Max Print Volume 250*250*260mm
- Max Priting Speed 600mm/s
- Max Nozzle Temp 300℃
- Max Bed Temp 100℃
ANYCUBIC
Anycubic PETG Filament
- Anycubic PETG Filament
- Strong and Durable
- Clear and Vibrant
- Prop Bed Temp 75~90℃
- Prop Nozzle Temp 230~250℃
ANYCUBIC
Anycubic Photon Mono M5s Pro
- 10.1-inch 14K Mono LCD
- ACF Release Film
- LED matrix UV light source
- Print Speed Up to 105mm/h
- XY Resolution of 16.8*24.8μm
- Wi-Fi Transfer Speeds of 6-10Mbps
- Build Volume of 200x223.78x126.38 mm³
- 4.3-inch Capacitive Touch Screen Controller
- Equipped to Air Heater & Purifier
ANYCUBIC
Anycubic PLA Pantone
- Anycubic PLA Pantone
- Co-Created with Pantone Color Institute
- Density 1.23g/cm³
- Tensile Strength 60MPa
- Eco-friendly
- +0.02mm precision
- Prop Extruder Temp 200~210°C
- Prop Bed Temp 50-60°C
ANYCUBIC
Anycubic Kobra 2 Max
- Anycubic Kobra 2 Max 3D Printer
- Build Volume 420*420*500mm
- Print Speed Up to 500 mm/s
- Hotend Max Temp 260 °C
- Build Plate Max Temp 90 °C
- Anycubic LeviQ 2.0 Automatic Leveling 49 Points
- 4.3" Removable Touch Screen Controller
- PEl Magnetic Spring Steel Printing bed
ANYCUBIC
Anycubic Kobra 2 Pro
- Anycubic Kobra 2 Pro 3D printer
- Maximum Print 250*220*220mm
- Max Speed 500mm/s
- Automatic Leveling LeviQ 2.0
- Max Hotend Temp 260°C
- Max Bed Temp 110°C
- Super Quick 7000rpm/min Cooling fan
- 4.3" LCD Touch-Control Screen
ANYCUBIC
Anycubic Kobra 2 Plus
- Anycubic Kobra 2 Plus 3D printer
- Maximum Print 400x320x320mm
- Max Speed 500mm/s
- Automatic Leveling LeviQ 2.0
- Max Hotend Temp 260°C
- Max Bed Temp 90°C
- Super Quick 7000rpm/min Cooling fan
- 4.3" LCD Touch-Control Screen
ANYCUBIC
Anycubic Photon Mono M5s
- Anycubic Photon Mono M5s Resin 3D Printer
- 10.1" monochrome LCD 12K
- Maximum Print Dimmention 200x218x123mm
- Leveling-free Printing Plate
- 4.3" TFT touch-controller
- Light Source LED matrix UV light
- XY Resolution 19*24nm
- Resin Status Detection Sensor
ANYCUBIC
Anycubic Kobra 2 Neo
- Anycubic Kobra 2 Neo 3D Printer
- Printing Volume 250*220*220mm
- Max Printing Speed 250mm/s
- Automatic Bed Leveling LeviQ 2.0 25 Points
- Max Nozzle Temp 260°C
- Max Bed Temp 110°C
- 2.4" LCD Knob-Control
ANYCUBIC
Anycubic Kobra 3
- Anycubic Kobra 3
- Max Print Volume 250*250*260mm
- Max Priting Speed 600mm/s
- Max Nozzle Temp 300℃
- Max Bed Temp 100℃
- 4.3-inch Touch Controller
- Hardened Steel Extruder Gear
- Automatic hot bed leveling
- Quick Swap Nozzle
ANYCUBIC
Anycubic Photon Mono 4
- Anycubic Photon Mono 4 Resin 3D Printer
- 7 Inches 10K Monochrome LCD
- Resolution 9024x5120 Pixel
- Xy resolution 17*17μm
- 2.8" Touch Screen Controller
- Light intensity ~3000μW /cm²
- 4-point manual Printing Plate leveling
- LighTurbo Light Source
- Max Printing Volume 153.4*87*165mm
- Layer height 0.03-0.15mm
- Printing Speed up to 70mm/h
ANYCUBIC
Anycubic Photon Mono 4 Ultra
- Anycubic Photon Mono 4 Ultra
- 7 Inches 10K MonoChrome LCD
- XY 17*17μm
- Printing Speed Up to 80-120mm/h
- Priting Volume 153.4*87*165 mm
- COB Light Source
- ACF Release Film
- 4 Point Manual Leveling
- WiFi6 and Lan Connectivity
- 4.3Inch Touch screen controller
- Internal Air Purifier
ANYCUBIC
Anycubic Kobra 3 Max
- Anycubic Kobra 3 MAX
- With Multi Filament 3D Priting Anycubic Ace Pro
- Max Print Volume 425*425*500mm
- Max Priting Speed 600mm/s
- Max Nozzle Temp 300℃
- Max Bed Temp 110℃
- Vibration Compensation System
ANYCUBIC
Anycubic Kobra S1
- Anycubic Kobra S1
- Print Volume 250*250*250mm
- Printing Speed up to 600mm/s
- Ultra-Quiet Printing 33dB
- Compatible with PLA, PETG, TPU，ABS, ASA
- Nozzle temperature 320°C
- Hotbed temperature 120℃
HeyGears
HeyGears UltraCraft Reflex RS Turbo Combo
- Amber 8K Screen with 566:1 contrast ratio
- Ultra-sharp details with ±15 μm printing accuracy
- 4.5s per layer high-speed 3D printing
- Dynamic Motion Algorithm 3.0 boosts speed by 33%
- Adaptive resin optimization for 180+ process combos
- Automatic one-click pre-processing & slicing
- Real-time force monitoring with residue detection
- Heated resin tank for stable viscosity and print quality
- C5-grade Z-axis module with ≤2 μm positioning error
- WiFi & USB connectivity for seamless workflow
HeyGears
HeyGears UltraCraft Reflex Combo
- Fully automated 3D printing workflow
- Ultra-high precision with 33μm XY resolution
- Smart AI-assisted peeling force management
- Automatic resin level detection and refill
- Heated resin tray for stable print quality
- Powerful 385+nm UV light for faster curing
- Optimized dual curing for stronger materials
- Intelligent regional exposure technology
- Advanced Z-axis compensation for smooth surfaces
- Consistent printing performance over time
- Wide compatibility with advanced resins
- Compact design with Wi-Fi and Ethernet support
HeyGears
HeyGears UltraCraft Reflex RS Combo
- C5 Z-axis accuracy up to ±2µm
- 10.3" 8K mono LCD screen
- 60-zone screen calibration
- Printing accuracy ±15µm
- 33% faster printing speed
- Adaptive Z compensation 180 setups
- Residue detection 0.2mm
- Auto screen leveling ±0.15°
- One-click auto slicing
- Heated resin tank (optional)
- Real-time force monitoring
- Smart USB & Wi-Fi connectivity
English
العربية
