• 450W high-power solar charging output
• 25% efficiency with N-Type 16BB cells
• Premium monocrystalline solar cells
• Excellent low-light performance
• Advanced 16BB cell technology
• Smart bypass diodes for safer use
• Up to 10% better shade performance
• Durable ETFE weatherproof surface
• IP68 protection for outdoor use
• Foldable and lightweight design
• 20% lighter than standard panels
• Strong anodized aluminum frame
• Wide connector compatibility
• Includes cables, bag, and 3-year warranty

• 4-Color Printing Module for multi-color models
• RFID auto filament detection and syncing
• Upgraded chamber camera with Wi-Fi monitoring
• CoreXY motion system with 500 mm/s speed
• 20,000 mm/s² high-acceleration printing
• 256×256×256 mm build volume capacity
• Hardened brass-steel nozzle for CF materials
• 320°C nozzle for engineering filaments
• 110°C heated bed for strong first layers
• Supports CF, GF, ABS, PC, PA, ASA, PETG
• Triple Z-screws with linear guide rods
• 121-point auto leveling precision
• Dual-sided PEI flexible build plate
• Silent Drive motors for low noise
• Full-Auto Calibration for easy setup

• Creality Space Pi Filament Dryer
• 360° Hot-air Heating
• Real-time humidity & temperature monitoring
• Drying time setting 0-48h
• One-key set for 12 filaments

• 400W powerful solar charging output
• 25% conversion efficiency
• Advanced N-Type 16BB solar cells
• Premium monocrystalline cells
• Excellent low-light performance
• Stable output in cloudy weather
• Smart parallel wiring design
• Reinforced adjustable kickstands
• 5000+ fold cycle durability
• ETFE waterproof surface
• IP68 outdoor protection
• Foldable and lightweight build
• Strong anodized aluminum frame
• Wide connector compatibility
• Includes bag, cables, and warranty

• Creality K2 Plus Combo 3D Printer
• Multi Filament 3D Printing With CFS
•  Apus Direct Drive Extruder​
• Build Volume 350x350x350mm
• Printing Speed Up to 600mm/s
• Max Nozzle Temp 350°C
• Max Bed Temp 120°C
• Ai Pritning Control System
• Fully Automatic Leveling
• Actively heated chamber
• Conectivity RJ45 ethernet, Wifi

• Creality Space Pi Filament Dryer Plus
• Two Rolls Capacity
• 360° Hot-air Heating
• Real-time humidity & temperature monitoring
• Drying time setting 0-48h
• One-key set for 12 filaments

• 2,764.8Wh base battery, expandable to 58kWh
• 3,840W output with 7,680W surge power
• Expandable output up to 11.52kW
• 20ms UPS seamless backup switching
• Industry-first 12kW bypass support
• Up to 19.2kW solar input support
• 2,400W fast solar charging input
• LiFePO₄ battery with 6,000+ cycles
• Up to 17 years battery lifespan
• Smart app control via Wi-Fi & Bluetooth
• Supports home, RV, and off-grid use
• Ultra-low self-consumption design
• Fast AC and generator charging
• Durable compact premium build
• 5-year official BLUETTI warranty

• 300×300×300 mm large build volume
• CFS for up to 4-color multi-material printing
• Active air chamber heating system
• Expandable to 16 colors with 4 CFS units
• Equipped with a heated print chamber
• 32GB EMMC File Storage
• Max nozzle temp 300°C for advanced filaments
• Hardened steel nozzle, 40 mm³/s flow rate
• Speeds up to 600 mm/s, 20,000 mm/s² accel
• Intelligent auto bed leveling system
• Dual AI cameras for live monitoring
• Steel linear rail for smooth, durable motion
• 4-inch color touchscreen for easy controla

• Simple Yet Refined
• Post-processing Tools
• 24PCS KIT
• Contain Nozzle Cleaning Tools
• Thoughtful Design
• Craftsmanship with Ingenuity

• 3,014Wh long-life LiFePO₄ battery
• 2,400W output, 4,800W surge power
• World’s smallest 3kWh power station
• 21% lighter than similar 3kWh units
• 12V/30A DC port for campervan use
• 2,300W ultra-fast AC charging
• Up to 1,200W solar charging input
• Supports combined AC + DC charging
• 10ms UPS instant backup switching
• Bluetooth & Wi-Fi smart app control
• 6,000+ battery cycles to 80%
• Compact and travel-friendly design
• Pass-through charging supported
• 5-year official warranty coverage

• 260×260×260 mm large build volume
• CFS for up to 4-color multi-material printing
• Expandable to 16 colors with 4 CFS units
• Max nozzle temp 300°C for advanced filaments
• Hardened steel nozzle, 40 mm³/s flow rate
• Speeds up to 600 mm/s, 20,000 mm/s² accel
• Intelligent auto bed leveling system
• Dual AI cameras for live monitoring
• Steel linear rail for smooth, durable motion
• 4-inch color touchscreen for easy control

• Creality Sonic Pad 
• 3D Printing Pad Based on Klipper
• Compatible with most FDM printers
• Upgrade Printing Speed 2X~5X
• Equipped with RJ45 Ethernet port
• Control up to 4 FDM 3D Printers
• Controlling multiple 3D printers
• 2Gb RAM and 8Gb ROM
• 7" 1024*600 Pixel Multi Touch Screen
• Pre-Configured with 22 Creality Models

• 400W powerful solar charging output
• 25% conversion efficiency
• Advanced N-Type 16BB solar cells
• Premium monocrystalline cells
• Excellent low-light performance
• Stable output in cloudy weather
• Smart parallel wiring design
• Reinforced adjustable kickstands
• 5000+ fold cycle durability
• ETFE waterproof surface
• IP68 outdoor protection
• Foldable and lightweight build
• Strong anodized aluminum frame
• Wide connector compatibility
• Includes bag, cables, and warranty

• 260×260×260 mm large build volume
• Max nozzle temp 300°C for advanced filaments
• Hardened steel nozzle, 40 mm³/s flow rate
• Speeds up to 600 mm/s, 20,000 mm/s² accel
• Intelligent auto bed leveling system
• Dual AI cameras for live monitoring
• Steel linear rail for smooth, durable motion
• 4-inch color touchscreen for easy control

• Creality Filament Dry Box 2.0
• Temperature range 45°C-65°C
• 360° hot air heating
• Real-time monitoring
• 24-hour timer
• Compatible With all of Filaments
• Secure power switch

• 300×300×300 mm large build volume
• Equipped with a heated print chamber
• 32GB EMMC File Storage
• Max nozzle temp 300°C for advanced filaments
• Hardened steel nozzle, 40 mm³/s flow rate
• Speeds up to 600 mm/s, 20,000 mm/s² accel
• Intelligent auto bed leveling system
• Dual AI cameras for live monitoring
• Steel linear rail for smooth, durable motion
• 4-inch color touchscreen for easy control

• Accurate Filament Weighing
• Smooth Filament Feeding
• Wide Adaptability
• HD Display
• Compatible With all of FDM Printers
• Large-diameter roller design

• Fully enclosed chamber for stable printing
• Quad independent toolheads (4 nozzles)
• Up to 500% faster print performance
• Max travel speed: 600 mm/s
• Acceleration up to 30,000 mm/s²
• Near-zero purge waste technology
• FlashSwap multi-nozzle system
• Build volume: 256 × 256 × 256 mm
• Max nozzle temp: 320°C
• Heated bed up to 120°C
• Multi-material & multi-color printing
• Auto leveling & flow calibration
• Full HD camera remote monitoring
• WiFi, LAN & USB connectivity

• ELEGOO Mercury XS Bundle
• 360° all-round exposure
• Dual function of Curing & Washing
• Large washing volume of 7000ml
• Easy and intuitive operation
• UV Protection Cover
• Wide Compatibility

• Quad independent toolheads (4 nozzles)
• Up to 500% faster printing speed
• Max travel speed: 600 mm/s
• Acceleration up to 30,000 mm/s²
• Near-zero purge waste technology
• FlashSwap multi-nozzle system
• Build volume: 256 × 256 × 256 mm
• Max nozzle temp: 320°C
• Heated bed up to 120°C
• Multi-material & multi-color printing
• Auto leveling & flow calibration
• Full HD camera for monitoring
• WiFi, LAN & USB connectivity
• PEI flexible steel build plate
• Supports engineering-grade filaments

• ELEGOO Mercury X Bundle
• Washing and Curing Machine
• 60 ° Three-Dimensional Curing
• Large washing volume of 7000ml
• Easy and intuitive operation
• UV Protection Cover
• Wide Compatibility

• True 4-color intelligent printing
• Max speed up to 600 mm/s
• Acceleration up to 20000 mm/s²
• Auto filament switching system
• 99% power-loss recovery
• Quick-release nozzle design
• Nozzle options: 0.25–0.8 mm
• Core XY stable motion system
• Multi-material compatibility
• 4.3-inch full touch display
• Build volume 220×220×220 mm
• Max bed temp up to 110°C
• WIFI, Ethernet, USB connectivity
• Supports Prusa/Cura/Orca slicers
• Compact 363×363×413 mm body

• Creality UW-01
• Washing & Curing Machine
• Dual Band UV Light Source
• Large Size Washing Container
• 2~90min Washing & Curing
• Touch Buttons
• Washing Container Size 190*154*200mm

• Creality Hi Combo 3D Printer
• Support Multicolor 3D Printing
• Build Volume 260×260×300mm
• Printing Speed up to 500mm/s
• Max Nozzle Temperature ≤ 300 ℃
• Max Heatbed Temperature ≤ 100 ℃
• Full-auto leveling
• 3.2" color touch screen
• Built-in Sensor to Read Filament Info
• All-metal Body
• Monitoring Camera with a Privacy Cap

• Anycubic Wash & Cure 3
• 4L Extra-Large Cleaning Bucket Size
• Gooseneck UV Lighting
• Dual-layer Design
• IPA Saving Design
• Very Low Noise Working
• Curing Size 160*180mm

• CREALITY SPARKX i7 COMBO
• Build Volume: 260×260×255 mm
• Max Speed: ≤500 mm/s
• Acceleration: ≤10000 mm/s²
• Extruder: Direct Drive
• Nozzle System: Quick-Swap Hotend
• Supported Nozzles: 0.2 / 0.4 / 0.6 / 0.8 mm
• Input Shaping + Pressure Advance
• AI Camera: 720p with Smart Detection
• Auto Leveling and Z-Offset Calibration
• Print Surface: Dual-sided PEI Plate
• Compatible Materials: PLA, PETG, TPU, PLA-CF
• Connectivity: Wi-Fi, USB Drive, RS-485
• Storage: 8G EMMC + Creality OS
• CFS Lite / CFS Mini Multicolor Support

• Anycubic Wash & Cure 3 Plus
• Size Upgrade: 7.6L
• Curing Size 228*128*260mm
• Increase Energy Value 30,000uW/cm²
• IPA Saving: Dual-layer Curing Platform
• 12L Washing Bucket
• Curing Max Size φ220*260mm

• Native 4-Color Printing System
• 260×260×260 mm³ Build Volume
• Expandable Up to 19 Colors
• ACE GEN 2 Multicolor Technology
• 81.25% Less Filament Change Waste
• 300 mm/s Default Print Speed
• 600 mm/s Maximum Print Speed
• 20,000 mm/s² Max Acceleration
• LeviQ 3.0 49-Point Auto-Leveling
• Direct Drive Extruder System
• Supports PLA, PETG, TPU, ASA
• AI Spaghetti & Object Detection
• 720P Camera for Live Monitoring
• Ultra-Quiet Operation ≤48 dB

• Creality K1 Max Dual-Sided Printing Platform Board Kit
• Dual Use Functionality
• High Adhesion
• Quick Installation
• Cost Effective
• Easy to Demold
• Highly Flat
• Wear Resistant & Durable

• Anycubic Kobra 3 MAX
• With Multi Filament 3D Priting Anycubic Ace Pro
• Max Print Volume 425*425*500mm
• Max Priting Speed 600mm/s
• Max Nozzle Temp 300℃
• Max Bed Temp 110℃
• Vibration Compensation System

• Anycubic Wash & Cure Max
• 14.9L Impressive Maximum Cleaning Size
• 360° Spray Cleaning
• Alcohol-Efficient, Saving over 50%
• Supports Large 3D Models

• Creality Ender-5 Max Full Kit
• With Encloser Box
• Enormous 400×400×400mm Build volume
• Ultra Fast Printing 700 mm/s
• die-cast aluminum alloy frame
• 36-point auto leveling
• Printing Accuracy 100±0.1 mm
• Layer Height 0.05-0.3 mm
• Max Nozzle Temperature ≤ 300 ℃
• Max Heatbed Temperature ≤ 100 ℃

• Creality Filament Vacuum Storage Kit
• vacuum storage of filament
• Strong Suction for Fast Pumping
• Food-grade Material for Recycling
• One-button Vacuuming

• Creality Ender-5 Max 3D Printer
• Enormous 400×400×400mm Build volume
• Ultra Fast Printing 700 mm/s
• die-cast aluminum alloy frame
• 36-point auto leveling
• Printing Accuracy 100±0.1 mm
• Layer Height 0.05-0.3 mm
• Max Nozzle Temperature ≤ 300 ℃
• Max Heatbed Temperature ≤ 100 ℃

• Bambu Temperature Plate Smooth PEI
• Surface temperature resistance Up to 120℃
• Spring steel thickness 0.4 mm
• Usable print size 256*256 mm
• Excellent adhesion
• Works well with the Automatic Calibration
• Can be replaced by the user

• Multicolour Filament system
• For drying and storage
• Equipped with four spool slots
• Capable of eight-color printing
• Features anti-tangle protection
• Includes RFID detection system