Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Availability:
Not available
-
Categories:
3D Printer
-
Categories:
Resin
PHROZEN
Phrozen Castable Resin W40 Orange
- Phrozen Castable Resin W40 Orange
- 40% wax content
- Low shrinkage, high precision
- No foul/strong odor
- Compatible with 405nm 3D Printers
- XY resolution：0.050 mm
CREALITY
Creality K2 Plus Combo
- Creality K2 Plus Combo 3D Printer
- Multi Filament 3D Printing With CFS
- Apus Direct Drive Extruder
- Build Volume 350x350x350mm
- Printing Speed Up to 600mm/s
- Max Nozzle Temp 350°C
- Max Bed Temp 120°C
- Ai Pritning Control System
- Fully Automatic Leveling
- Actively heated chamber
- Conectivity RJ45 ethernet, Wifi
PHROZEN
Phrozen Castable Resin W20 Green
- Phrozen Castable Resin W20 Green
- 20% wax content
- Low shrinkage, high precision
- No foul/strong odor
- Compatible with 405nm 3D Printers
- XY resolution：0.050 mm
ANYCUBIC
Anycubic Water-Wash Resin+
- Water Washable & Slight Odor
- Low Viscosity for Fast Printing
- High Precision with Low Shrinkage
- Density 1.2 g/cm3
- Viscosity 150~250 mPa
- Hardness 80Shore D
- Tensile Strength 30-45MPa
ANYCUBIC
Anycubic ABS-Like Resin V2
- Anycubic ABS-Like Resin V2
- Water-Washable
- Excellent Toughness
- Durability and Well-Performance
- High Precision Minimal Shrinkage
ANYCUBIC
Anycubic Standard Resin V2
- Anycubic Standard Resin V2
- Superior Strength and Durability
- Elongation at break 25-30%
- Density 1.05-1.25g/cm³
- Viscosity 250-350 cP·mPa·s
- Hardness 80-83D
- Flexural modulus 1500-2100 MPa
- Resin wash Alcohol
- Exceptional Precision with Minimal Distortion
- High Impact Resistance and Broad Compatibility
ANYCUBIC
Anycubic Tough Resin 2.0
- Anycubic Tough Resin 2.0
- Density 1.10-1.15g/cm³
- Elongation at break 30-50%
- Hardness 76 Shore D
- Viscosity 150-250MPa·s（25℃）
- Heat deflection temp>60-65℃
- Exceptional Toughness & Resistant to Breakage
- Strong Elongation & High Flexibility
- High Precision, Minimal Shrinkage
ANYCUBIC
Anycubic Tough Resin Ultra
- Anycubic Tough Resin Ultra
- Density 1.05-1.25g/cm³
- Elongation at break 70-80%
- Flexural strength 15-25 MPa
- Hardness 71-75D
- Strong lmpact Resistance
- Flexible with Excellent Rebound
CREALITY
CREALITY SPARKX i7 COMBO
- CREALITY SPARKX i7 COMBO
- Build Volume: 260×260×255 mm
- Max Speed: ≤500 mm/s
- Acceleration: ≤10000 mm/s²
- Extruder: Direct Drive
- Nozzle System: Quick-Swap Hotend
- Supported Nozzles: 0.2 / 0.4 / 0.6 / 0.8 mm
- Input Shaping + Pressure Advance
- AI Camera: 720p with Smart Detection
- Auto Leveling and Z-Offset Calibration
- Print Surface: Dual-sided PEI Plate
- Compatible Materials: PLA, PETG, TPU, PLA-CF
- Connectivity: Wi-Fi, USB Drive, RS-485
- Storage: 8G EMMC + Creality OS
- CFS Lite / CFS Mini Multicolor Support
PHROZEN
Phrozen Castable Jewelry 3D Printing Resin
- Phrozen Castable Jewelry 3D Printing Resin
- Surface Hardness: 76 Shore D
- Tensile Stress at Break: 25.1 MPa
- Elongation at Break, EAB: 20.63 %
- Notched Izod Impact：28.98 J/m
- Specifically designed for casting
- Low shrinkage, high precision
- No foul/strong odor
- Compatible with 405nm 3D Printers
- XY resolution：0.050 mm
ANYCUBIC
Anycubic High Clear Resin
- Anycubic High Clear Resin
- Density 1.05-1.25g/cm³
- Elongation at break 14.6%
- Hardness 78D
- Tensile strength 28.1 MPa
- Molding shrinkage 3.72-4.24%
- Prevents Yellowing
- Durable and Robust
- Mild Scent and Safe
Jamg HE
JAMG HE Water Washable ABS Like Resin
- JAMG HE Water Washable ABS Like Resin
- Fast Curing
- Good Process Performance
- Low Viscosity
- Advantage of improved formulation
- Low Odour And Easy to Clean
Jamg HE
JAMG HE Gingiva Mask Resin
- JAMG HE Gingiva Mask Resin
- Available in Two Colors
- High Tensile Strength
- Low Odor & Non-Toxic
- Flexibility & Elasticity
- Compatibility with LCD & DLP 3D Printers
Jamg HE
JAMG HE Dental Castable Resin
- JAMG HE Dental Castable Resin
- High Accurate
- Ideal for make Crown or frame casting
- Ultra low shrinkage
- Ash free for casting
- Compatible Printer: DLP,LCD,SLA
ANYCUBIC
Anycubic Photon P1 Resin 3D Printer
- Industrial-grade ball screw for ultra-stable motion
- Supports high-viscosity resins up to 8000 cps
- Wave Release tech reduces peel force by 60%
- Precision-milled steel build plate <80 microns
- LCD alignment accuracy below 70 microns
- LighTurbo 4.0 with <2° light collimation
- Over 92% full-screen light uniformity
- Dual-material printing with optional kit
- Resin temperature control up to 40°C
- Intelligent Leveling System 3.0
- Dynamic Release System 3.0
- Light-Off Compensation 3.0
- NFEP film for smooth, consistent curing
- Remote monitoring via built-in camera
- One-click slicing in Photon Workshop 4.0
Jamg HE
JAMG HE Ultra Cast Resin
- JAMG HE Ultra Cast Resin
- Easy printing
- 90% wax resin
- Extremely easy casting
- No casting skill required
Jamg HE
JAMG HE High Wax Plus Resin
- JAMG HE High Wax Plus Resin
- 60% wax resin
- Great performance
- Smooth surface
- Suitable for filigree and diamond jewelry casting
- Weight 1000g
Jamg HE
JAMG HE X Cast Resin
- JAMG HE X Cast Resin
- Sutible for jewelry or silver & gold casting
- High detail prints
- Easy cleaning
- Super casting
- Easy to set diamond or stone
- Weight 1000g
Jamg HE
JAMG HE 10K Low Shrinkage Nano Resin
- JAMG HE 10K Low Shrinkage Nano Resin
- Density 1.05-1.25 g/cm3
- Jewelry Silicone Rubber Mold Resin
- Flexural modulus 1.882-2.385Mpa
- Flexural strength 59-70MPa
- Thermal expansion 95*E-6
- Tensile modulus 1.779-2.385 MPa
ELEGOO
ELEGOO Centauri Carbon 3D Printer
- ELEGOO Centauri Carbon 3D Printer
- Build Volume 256×256×256 mm
- Fully enclosed chamber
- Max Printing Speed 500 mm/s
- Support Auto-Leveling
- Layer Thickness 0.1-0.4 mm
- 4.3-inch Capacitive Touch Screen Controller
- Max Hot End Temperature 320 °C
- Max Heated Bed Temperature 110 °C
PHROZEN
Phrozen RPG 3D Printing Resin
- Phrozen RPG 3D Printing Resin
- More durable and playable
- Flexible and elastic
- Print once, play more
- The look that best suits your character
- Stunning matte gray finish
HeyGears
HeyGears UltraCraft Reflex RS Combo
- C5 Z-axis accuracy up to ±2µm
- 10.3" 8K mono LCD screen
- 60-zone screen calibration
- Printing accuracy ±15µm
- 33% faster printing speed
- Adaptive Z compensation 180 setups
- Residue detection 0.2mm
- Auto screen leveling ±0.15°
- One-click auto slicing
- Heated resin tank (optional)
- Real-time force monitoring
- Smart USB & Wi-Fi connectivity
PHROZEN
Phrozen Aqua Hyperfine 3D Printing Resin
- Phrozen Aqua Hyperfine 3D Printing Resin
- Phrozen RPG 3D Printing Resin
- More durable and playable
- Flexible and elastic
- Print once, play more
- The look that best suits your character
- Stunning matte gray finish
English
العربية
