• 4-Color Printing Module for multi-color models
• RFID auto filament detection and syncing
• Upgraded chamber camera with Wi-Fi monitoring
• CoreXY motion system with 500 mm/s speed
• 20,000 mm/s² high-acceleration printing
• 256×256×256 mm build volume capacity
• Hardened brass-steel nozzle for CF materials
• 320°C nozzle for engineering filaments
• 110°C heated bed for strong first layers
• Supports CF, GF, ABS, PC, PA, ASA, PETG
• Triple Z-screws with linear guide rods
• 121-point auto leveling precision
• Dual-sided PEI flexible build plate
• Silent Drive motors for low noise
• Full-Auto Calibration for easy setup

• Creality K2 Plus Combo 3D Printer
• Multi Filament 3D Printing With CFS
•  Apus Direct Drive Extruder​
• Build Volume 350x350x350mm
• Printing Speed Up to 600mm/s
• Max Nozzle Temp 350°C
• Max Bed Temp 120°C
• Ai Pritning Control System
• Fully Automatic Leveling
• Actively heated chamber
• Conectivity RJ45 ethernet, Wifi

• 300×300×300 mm large build volume
• CFS for up to 4-color multi-material printing
• Active air chamber heating system
• Expandable to 16 colors with 4 CFS units
• Equipped with a heated print chamber
• 32GB EMMC File Storage
• Max nozzle temp 300°C for advanced filaments
• Hardened steel nozzle, 40 mm³/s flow rate
• Speeds up to 600 mm/s, 20,000 mm/s² accel
• Intelligent auto bed leveling system
• Dual AI cameras for live monitoring
• Steel linear rail for smooth, durable motion
• 4-inch color touchscreen for easy controla

• 260×260×260 mm large build volume
• CFS for up to 4-color multi-material printing
• Expandable to 16 colors with 4 CFS units
• Max nozzle temp 300°C for advanced filaments
• Hardened steel nozzle, 40 mm³/s flow rate
• Speeds up to 600 mm/s, 20,000 mm/s² accel
• Intelligent auto bed leveling system
• Dual AI cameras for live monitoring
• Steel linear rail for smooth, durable motion
• 4-inch color touchscreen for easy control

• 260×260×260 mm large build volume
• Max nozzle temp 300°C for advanced filaments
• Hardened steel nozzle, 40 mm³/s flow rate
• Speeds up to 600 mm/s, 20,000 mm/s² accel
• Intelligent auto bed leveling system
• Dual AI cameras for live monitoring
• Steel linear rail for smooth, durable motion
• 4-inch color touchscreen for easy control

• 300×300×300 mm large build volume
• Equipped with a heated print chamber
• 32GB EMMC File Storage
• Max nozzle temp 300°C for advanced filaments
• Hardened steel nozzle, 40 mm³/s flow rate
• Speeds up to 600 mm/s, 20,000 mm/s² accel
• Intelligent auto bed leveling system
• Dual AI cameras for live monitoring
• Steel linear rail for smooth, durable motion
• 4-inch color touchscreen for easy control

• Quad independent toolheads (4 nozzles)
• Up to 500% faster printing speed
• Max travel speed: 600 mm/s
• Acceleration up to 30,000 mm/s²
• Near-zero purge waste technology
• FlashSwap multi-nozzle system
• Build volume: 256 × 256 × 256 mm
• Max nozzle temp: 320°C
• Heated bed up to 120°C
• Multi-material & multi-color printing
• Auto leveling & flow calibration
• Full HD camera for monitoring
• WiFi, LAN & USB connectivity
• PEI flexible steel build plate
• Supports engineering-grade filaments

• True 4-color intelligent printing
• Max speed up to 600 mm/s
• Acceleration up to 20000 mm/s²
• Auto filament switching system
• 99% power-loss recovery
• Quick-release nozzle design
• Nozzle options: 0.25–0.8 mm
• Core XY stable motion system
• Multi-material compatibility
• 4.3-inch full touch display
• Build volume 220×220×220 mm
• Max bed temp up to 110°C
• WIFI, Ethernet, USB connectivity
• Supports Prusa/Cura/Orca slicers
• Compact 363×363×413 mm body

• Creality Hi Combo 3D Printer
• Support Multicolor 3D Printing
• Build Volume 260×260×300mm
• Printing Speed up to 500mm/s
• Max Nozzle Temperature ≤ 300 ℃
• Max Heatbed Temperature ≤ 100 ℃
• Full-auto leveling
• 3.2" color touch screen
• Built-in Sensor to Read Filament Info
• All-metal Body
• Monitoring Camera with a Privacy Cap

• CREALITY SPARKX i7 COMBO
• Build Volume: 260×260×255 mm
• Max Speed: ≤500 mm/s
• Acceleration: ≤10000 mm/s²
• Extruder: Direct Drive
• Nozzle System: Quick-Swap Hotend
• Supported Nozzles: 0.2 / 0.4 / 0.6 / 0.8 mm
• Input Shaping + Pressure Advance
• AI Camera: 720p with Smart Detection
• Auto Leveling and Z-Offset Calibration
• Print Surface: Dual-sided PEI Plate
• Compatible Materials: PLA, PETG, TPU, PLA-CF
• Connectivity: Wi-Fi, USB Drive, RS-485
• Storage: 8G EMMC + Creality OS
• CFS Lite / CFS Mini Multicolor Support

• Creality Ender-5 Max Full Kit
• With Encloser Box
• Enormous 400×400×400mm Build volume
• Ultra Fast Printing 700 mm/s
• die-cast aluminum alloy frame
• 36-point auto leveling
• Printing Accuracy 100±0.1 mm
• Layer Height 0.05-0.3 mm
• Max Nozzle Temperature ≤ 300 ℃
• Max Heatbed Temperature ≤ 100 ℃

• Creality Ender-5 Max 3D Printer
• Enormous 400×400×400mm Build volume
• Ultra Fast Printing 700 mm/s
• die-cast aluminum alloy frame
• 36-point auto leveling
• Printing Accuracy 100±0.1 mm
• Layer Height 0.05-0.3 mm
• Max Nozzle Temperature ≤ 300 ℃
• Max Heatbed Temperature ≤ 100 ℃

• Creality Ender-3 V3 Plus 3D Printer
• Max Printing Volume 300*300*300mm
• Max Printing Speed 600mm/s
• Max Extruder Temp 300°C
• Max Bed Temp 100°C
• Fully Automatic Bed Leveling
• 4.3Inch Touch Screen Controller
• Tough Aerospace Aluminum Alloy
• Quick-swap Nozzle
• Two Powerful Motors on Y-axis
• Automated XZ Belt Tensioning
• Printing Accuracy ±0.2mm

• Creality HALOT X1 16K
• 10.1-inch advanced monochrome LCD screen
• Pixel size 14 × 19 µm for extreme accuracy
• True leveling-free printing system built-in
• Fast printing speed up to 170 mm per hour
• One-second quick-release build plate design
• Quick-release resin vat for easy handling
• 92-zone intelligent exposure for clarity
• Stable top-down motion with dual rails
• Z-axis accuracy up to 0.01 mm guaranteed
• Smart AFU resin management system built-in
• Supports versatile 405 nm UV printing resin
• Easy file transfer via USB and WiFi options
• 3.98-inch capacitive touchscreen interface
• 3DRAYAN.COM official Piocreat dealer in UAE

• Creality Hi 3D Printer
• Build Volume 260×260×300mm
• Printing Speed up to 500mm/s
• Max Nozzle Temperature ≤ 300 ℃
• Max Heatbed Temperature ≤ 100 ℃
• Full-auto leveling
• 3.2" color touch screen
• Built-in Sensor to Read Filament Info
• All-metal Body
• Monitoring Camera with a Privacy Cap

• ELEGOO OrangeStorm Giga
• Build Volume 800x800x1000mm
• Printing Speed 300mm/s
• Multi-Nozzle Printing
• Portable 7-inch Controller
• Multi link Printing Plate
• Max Bed Temp 90°C
• Max Extruder Temp 300℃

• ELEGOO Centauri Carbon 3D Printer
• Build Volume 256×256×256 mm
• Fully enclosed chamber
• Max Printing Speed 500 mm/s
• Support Auto-Leveling
• Layer Thickness 0.1-0.4 mm
• 4.3-inch Capacitive Touch Screen Controller
• Max Hot End Temperature 320 °C
• Max Heated Bed Temperature 110 °C

• Large build volume 340×320×340 mm
• Multi-color printing with AMS 2 Pro
• Supports up to 24 colors & materials
• Optical calibration at 5μm accuracy
• All-metal nozzle with 350°C heat
• Heated chamber up to 65°C
• Automatic filament drying system
• 23 smart sensors & 3 AI cameras
• Print speed up to 1000 mm/s
• Servo motor with 67% more extrusion
• Optional 10W laser cutting module
• Active vibration compensation system
• Sturdy, integrated metal body design
• Ultra-quiet operation under 50 dB

• Dual-nozzle system for multi-material & multi-color printing
• Maximum print speed up to 600mm/s
• Massive build volume: 350×320×325 mm³
• High-temperature all-metal hotend: up to 350°C
• 65°C actively heated chamber for warp-free printing
• Supports over 20 materials: PLA, ABS, PETG, TPU, PC, PA
• REAL High-Flow Hotend: up to 65mm³/s flow rate
• Intelligent DynaSense Extruder with closed-loop servo control
• Automatic multi-color and multi-filament printing
• Supports up to 16 filaments
• 15-point filament monitoring system for feeding, tip location, tension & flow
• AI and Smart Features
• AI-powered pre-flight checklist
• Built-in cameras: BirdsEye, Nozzle, Toolhead
• Auto bed leveling and Z-offset calibration
• Real-time error detection (clogs, tangles, under-extrusion)
• Power loss recovery & filament runout detection
• Compatible with optional 10W / 40W laser modules
• Compatible with digital cutting blade module
• Compatible with pen plotter tool for writing/drawing
• Quick-swap toolheads with automatic recognition
• Laser Power: 10W or 40W (455nm)
• Engraving area: up to 310×270 mm
• Engraves and cuts wood, acrylic, leather, rubber, and more
• Micro Lidar for 3D mesh generation and Z-height sensing
• Built-in air assist, flame detection, and safety systems
• Digital Cutting & Drawing
• Cutting area: 300×285 mm²
• Blade pressure: 50gf to 600gf
• Supports vinyl, paper, fabric, leather, etc.

• Bambu Lab A1 Combo 3D printer
• Multi-Color Printing With AMS
• Build Volume:256*256*256 mm³
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 100℃
• built-in Monitoring camera

• Elegoo Saturn 4 Ultra 16K
• Build Volume 211.68*118.37*220
• 10Inch Monochrome LCD 11520*5120
• XY Resolution 19*24um
• Real-Time Monitoring Ai HD Camera
• Layer Thickness 0.01-0.2mm
• Fully Automatic Leveling
• Tilt Release Technology for faster Printing
• Printing Speed up to  150mm/h
• enhance printing by Heating tank 
• Wi-Fi File Transfer & Cluster Printing

• 12.8-inch 6K mono LCD
• PFA Release Film
• Light Source COB light source
• Print Speed Up to 70mm/H
• XY Resolution of 51*51um
• Build Volume of 277.848*156.264*300 mm³
• 3.5-inch Capacitive Touch Screen Controller

• Creality K1C 3D Printer
• 600mm/s Printing Speed
• Versatile Ai LiDAR
• Priting Dimention : 220*220*250mm
• Maximum Hotend Temp  300℃
• Maximum HotBed Temp  100℃
• Equipted to Ai Camera
• equipped to Air Purifier

• Creality K1 Max 3D Printer
• 600mm/s Printing Speed
• Versatile Ai LiDAR
• Priting Dimention : 300*300*300mm
• Maximum Hotend Temp  300℃
• Maximum HotBed Temp  100℃
• Equipted to Ai Camera
• equipped to Air Purifier

• Creality Ender-3 V3 KE 3D Printer
• Build Volume 220*220*240mm
• Max Printing Speed 500mm/s
• Max Nozzle Temp 300
• Max Bed Temp 100
• 4.3" Color Touch Screen Controller
• Layer Thickness 0.1-0.35mm

• Large build volume: 302.4 × 161.98 × 300 mm
• 14-inch 16K LCD with 20×26μm XY resolution
• New dual-door design for better accessibility
• Multi-point auto-leveling system for precision
• Quick LCD replacement in just 10 minutes
• Release film replacement in only 10 seconds
• Smart resin feeding and recycling system (2kg tank)
• Heated resin vat for stable printing temperature
• Built-in camera with adaptive lighting and alerts
• Compatible with Elegoo SatelLite slicer software

• Creality K2 Plus 3D Printer
• Build Volume 350x350x350mm
• Printing Speed Up to 600mm/s
• Max Nozzle Temp 350°C
• Max Bed Temp 120°C
• Ai Pritning Control System
• Printing Accuracy 100mm±0.1mm
• Extruder Apus dual-gear direct drive extruder
• Fully Automatic Leveling
• Actively heated chamber
• Conectivity RJ45 ethernet, Wifi

• ELEGOO Mars 5 Ultra 3D Printer
• 7-inch 9K Mono LCD
• Printing Speed 150mm/h
• Resolution 8520x4320
• XY Resolution 18x18μm
• Smart Printing with AI Camera
• Automatic Build Plate Leveling
• Layer Thickness 0.01-0.2mm
• 9H Screen Protector
• 4.0-inch Capacitive Touch Screen Controller
• Z-AXIS Accuracy 0.02mm
• Real-Time Monitoring

• Bambu Lab X1 Carbon COMBO 3D printer
• Equipped with the AMS System
• Build Volume:256×256×256mm
• High quality printing with 7 μm Lidar Resolution
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 110℃
• built-in chamber camera

• ELEGOO Saturn 4 Ultra Resin 3D Printer
• 10" Mono LCD 12K
• Resolution 11520*5120
• XY Resolution 19*24um
• Build Volume 218.88*122.88*220mm
• Layer Thickness 0.01-0.2mm
• Printing Speed 150mm/H
• Printing Technology : MSLA Stereo lithography
• Light Source COB + Fresnel Collimating Lens
• PFA release film
• 4-inch capacitive touch screen Controller
• Real-Time AI Monitoring And Time
• Automatic Build Plate Leveling

• Bambu Lab P1P 3D printer
• Build Volume:256×256×256mm
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 110℃
• built-in chamber camera

• Bambu Lab P1S 3D printer
• Build Volume:256×256×256mm
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 110℃
• Enclosed-body for high-temperature filament printing
• Up to 16-color printing with AMS
• built-in chamber camera

• Bambu Lab A1 mini 3D printer
• Build Volume:180*180*180 mm³
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 80℃
• built-in Monitoring camera

• Bambu Lab P1S 3D printer
• Build Volume:256×256×256mm
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 110℃
• built-in chamber camera

• 10-inch 12K Mono LCD
• ACF Release Film
• Light Source COB+Reflective Light Source
• Print Speed Up to 150mm/h
• Linux OS with 4Gb RAM
• XY Resolution of 19×24μm
• Wi-Fi Transfer Speeds of 6-10Mbps
• Build Volume of 218.88×122.88×260 mm³
• 4.0-inch Capacitive Touch Screen Controller

• 7-inch 9K mono LCD
• ACF Release Film
• Light Source COB light source + Fresnel collimating lens
• Print Speed Up to 150mm/h
• Linux OS with 4Gb RAM
• XY Resolution of 18μm
• Wi-Fi Transfer Speeds of 6-10Mbps
• Build Volume of 153.36x77.76x165 mm³
• 4.0-inch Capacitive Touch Screen Controller