Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Brand:
ANYCUBIC
-
Brand:
BAMBU LAB
-
Brand:
CREALITY
-
Brand:
ELEGOO
-
Brand:
FLASHFORGE
ELEGOO
ELEGOO Centauri Carbon 2
- 4-Color Printing Module for multi-color models
- RFID auto filament detection and syncing
- Upgraded chamber camera with Wi-Fi monitoring
- CoreXY motion system with 500 mm/s speed
- 20,000 mm/s² high-acceleration printing
- 256×256×256 mm build volume capacity
- Hardened brass-steel nozzle for CF materials
- 320°C nozzle for engineering filaments
- 110°C heated bed for strong first layers
- Supports CF, GF, ABS, PC, PA, ASA, PETG
- Triple Z-screws with linear guide rods
- 121-point auto leveling precision
- Dual-sided PEI flexible build plate
- Silent Drive motors for low noise
- Full-Auto Calibration for easy setup
CREALITY
Creality K2 Plus Combo
- Creality K2 Plus Combo 3D Printer
- Multi Filament 3D Printing With CFS
- Apus Direct Drive Extruder
- Build Volume 350x350x350mm
- Printing Speed Up to 600mm/s
- Max Nozzle Temp 350°C
- Max Bed Temp 120°C
- Ai Pritning Control System
- Fully Automatic Leveling
- Actively heated chamber
- Conectivity RJ45 ethernet, Wifi
CREALITY
Creality K2 PRO Combo 3D Printer
- 300×300×300 mm large build volume
- CFS for up to 4-color multi-material printing
- Active air chamber heating system
- Expandable to 16 colors with 4 CFS units
- Equipped with a heated print chamber
- 32GB EMMC File Storage
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy controla
CREALITY
Creality K2 Combo 3D Printer
- 260×260×260 mm large build volume
- CFS for up to 4-color multi-material printing
- Expandable to 16 colors with 4 CFS units
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
CREALITY
Creality K2 Standard 3D Printer
- 260×260×260 mm large build volume
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
CREALITY
Creality K2 PRO Standard 3D Printer
- 300×300×300 mm large build volume
- Equipped with a heated print chamber
- 32GB EMMC File Storage
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
CREALITY
Creality Hi Combo
- Creality Hi Combo 3D Printer
- Support Multicolor 3D Printing
- Build Volume 260×260×300mm
- Printing Speed up to 500mm/s
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
- Full-auto leveling
- 3.2" color touch screen
- Built-in Sensor to Read Filament Info
- All-metal Body
- Monitoring Camera with a Privacy Cap
CREALITY
CREALITY SPARKX i7 COMBO
- CREALITY SPARKX i7 COMBO
- Build Volume: 260×260×255 mm
- Max Speed: ≤500 mm/s
- Acceleration: ≤10000 mm/s²
- Extruder: Direct Drive
- Nozzle System: Quick-Swap Hotend
- Supported Nozzles: 0.2 / 0.4 / 0.6 / 0.8 mm
- Input Shaping + Pressure Advance
- AI Camera: 720p with Smart Detection
- Auto Leveling and Z-Offset Calibration
- Print Surface: Dual-sided PEI Plate
- Compatible Materials: PLA, PETG, TPU, PLA-CF
- Connectivity: Wi-Fi, USB Drive, RS-485
- Storage: 8G EMMC + Creality OS
- CFS Lite / CFS Mini Multicolor Support
CREALITY
Creality Ender-5 Max
- Creality Ender-5 Max 3D Printer
- Enormous 400×400×400mm Build volume
- Ultra Fast Printing 700 mm/s
- die-cast aluminum alloy frame
- 36-point auto leveling
- Printing Accuracy 100±0.1 mm
- Layer Height 0.05-0.3 mm
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
ELEGOO
ELEGOO Centauri Carbon 3D Printer
- ELEGOO Centauri Carbon 3D Printer
- Build Volume 256×256×256 mm
- Fully enclosed chamber
- Max Printing Speed 500 mm/s
- Support Auto-Leveling
- Layer Thickness 0.1-0.4 mm
- 4.3-inch Capacitive Touch Screen Controller
- Max Hot End Temperature 320 °C
- Max Heated Bed Temperature 110 °C
CREALITY
Creality Ender-3 V3 Plus
- Creality Ender-3 V3 Plus 3D Printer
- Max Printing Volume 300*300*300mm
- Max Printing Speed 600mm/s
- Max Extruder Temp 300°C
- Max Bed Temp 100°C
- Fully Automatic Bed Leveling
- 4.3Inch Touch Screen Controller
- Tough Aerospace Aluminum Alloy
- Quick-swap Nozzle
- Two Powerful Motors on Y-axis
- Automated XZ Belt Tensioning
- Printing Accuracy ±0.2mm
CREALITY
Creality HALOT X1 Resin 3D Printer
- Creality HALOT X1 16K
- 10.1-inch advanced monochrome LCD screen
- Pixel size 14 × 19 µm for extreme accuracy
- True leveling-free printing system built-in
- Fast printing speed up to 170 mm per hour
- One-second quick-release build plate design
- Quick-release resin vat for easy handling
- 92-zone intelligent exposure for clarity
- Stable top-down motion with dual rails
- Z-axis accuracy up to 0.01 mm guaranteed
- Smart AFU resin management system built-in
- Supports versatile 405 nm UV printing resin
- Easy file transfer via USB and WiFi options
- 3.98-inch capacitive touchscreen interface
- 3DRAYAN.COM official Piocreat dealer in UAE
CREALITY
Creality Hi 3D Printer
- Creality Hi 3D Printer
- Build Volume 260×260×300mm
- Printing Speed up to 500mm/s
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
- Full-auto leveling
- 3.2" color touch screen
- Built-in Sensor to Read Filament Info
- All-metal Body
- Monitoring Camera with a Privacy Cap
ANYCUBIC
Anycubic Photon P1 Resin 3D Printer
- Industrial-grade ball screw for ultra-stable motion
- Supports high-viscosity resins up to 8000 cps
- Wave Release tech reduces peel force by 60%
- Precision-milled steel build plate <80 microns
- LCD alignment accuracy below 70 microns
- LighTurbo 4.0 with <2° light collimation
- Over 92% full-screen light uniformity
- Dual-material printing with optional kit
- Resin temperature control up to 40°C
- Intelligent Leveling System 3.0
- Dynamic Release System 3.0
- Light-Off Compensation 3.0
- NFEP film for smooth, consistent curing
- Remote monitoring via built-in camera
- One-click slicing in Photon Workshop 4.0
ANYCUBIC
Anycubic Photon Mono M7 Pro
- Anycubic Photon Mono M7 Pro
- Max Printing Speed 170mm/h
- 10.1'', 14K Mono LCD
- Resolution 13320 * 5120
- 5" IPS Touch Controller
- Auto Resin Refill, Withdrawal
- Auto-Adaptive Technology Control Heating
- Intelligent Workflow-Assist Printing
- Dynamic Temperature Control Resin VAT
BAMBU LAB
Bambu Lab H2S AMS Combo 3D Printer
- Large build volume 340×320×340 mm
- Multi-color printing with AMS 2 Pro
- Supports up to 24 colors & materials
- Optical calibration at 5μm accuracy
- All-metal nozzle with 350°C heat
- Heated chamber up to 65°C
- Automatic filament drying system
- 23 smart sensors & 3 AI cameras
- Print speed up to 1000 mm/s
- Servo motor with 67% more extrusion
- Optional 10W laser cutting module
- Active vibration compensation system
- Sturdy, integrated metal body design
- Ultra-quiet operation under 50 dB
![]()
BAMBU LAB
Bambu Lab H2D AMS Combo 3D Printer
- Dual-nozzle system for multi-material & multi-color printing
- Maximum print speed up to 600mm/s
- Massive build volume: 350×320×325 mm³
- High-temperature all-metal hotend: up to 350°C
- 65°C actively heated chamber for warp-free printing
- Supports over 20 materials: PLA, ABS, PETG, TPU, PC, PA
- REAL High-Flow Hotend: up to 65mm³/s flow rate
- Intelligent DynaSense Extruder with closed-loop servo control
- Automatic multi-color and multi-filament printing
- Supports up to 16 filaments
- 15-point filament monitoring system for feeding, tip location, tension & flow
- AI and Smart Features
- AI-powered pre-flight checklist
- Built-in cameras: BirdsEye, Nozzle, Toolhead
- Auto bed leveling and Z-offset calibration
- Real-time error detection (clogs, tangles, under-extrusion)
- Power loss recovery & filament runout detection
- Compatible with optional 10W / 40W laser modules
- Compatible with digital cutting blade module
- Compatible with pen plotter tool for writing/drawing
- Quick-swap toolheads with automatic recognition
- Laser Power: 10W or 40W (455nm)
- Engraving area: up to 310×270 mm
- Engraves and cuts wood, acrylic, leather, rubber, and more
- Micro Lidar for 3D mesh generation and Z-height sensing
- Built-in air assist, flame detection, and safety systems
- Digital Cutting & Drawing
- Cutting area: 300×285 mm²
- Blade pressure: 50gf to 600gf
- Supports vinyl, paper, fabric, leather, etc.
BAMBU LAB
Bambu Lab A1 Combo
- Bambu Lab A1 Combo 3D printer
- Multi-Color Printing With AMS
- Build Volume:256*256*256 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 100℃
- built-in Monitoring camera
ANYCUBIC
Anycubic Kobra 3 Max
- Anycubic Kobra 3 MAX
- With Multi Filament 3D Priting Anycubic Ace Pro
- Max Print Volume 425*425*500mm
- Max Priting Speed 600mm/s
- Max Nozzle Temp 300℃
- Max Bed Temp 110℃
- Vibration Compensation System
ELEGOO
ELEGOO OrangeStorm Giga
- ELEGOO OrangeStorm Giga
- Build Volume 800x800x1000mm
- Printing Speed 300mm/s
- Multi-Nozzle Printing
- Portable 7-inch Controller
- Multi link Printing Plate
- Max Bed Temp 90°C
- Max Extruder Temp 300℃
ANYCUBIC
Anycubic Kobra S1 Combo
- Anycubic Kobra S1 Combo
- Print Volume 250*250*250mm
- Printing Speed up to 600mm/s
- 8 Color 3D Printing
- Ultra-Quiet Printing 33dB
- Compatible with PLA, PETG, TPU，ABS, ASA
- Nozzle temperature 320°C
- Hotbed temperature 120℃
ELEGOO
ELEGOO Saturn 4 Ultra 16K
- Elegoo Saturn 4 Ultra 16K
- Build Volume 211.68*118.37*220
- 10Inch Monochrome LCD 11520*5120
- XY Resolution 19*24um
- Real-Time Monitoring Ai HD Camera
- Layer Thickness 0.01-0.2mm
- Fully Automatic Leveling
- Tilt Release Technology for faster Printing
- Printing Speed up to 150mm/h
- enhance printing by Heating tank
- Wi-Fi File Transfer & Cluster Printing
ANYCUBIC
Anycubic Photon Mono M7 Max
- Anycubic Photon Mono M7 Max
- Resin Auto-Fill Unit
- Build Volume 298x164x300mm
- 13.6 inch monochrome 7K screen
- X/Y Axis Resolution 46*46μm
- LighTurbo 3.0 High-Precision Light Source System
- Maximum print speed op to 86mm/h
- Dynamic temperature control resin vat
- Intelligence Assisted Printing System
- Light Source COB light source+ Fresnel lens
- Light Intensity 4500±10%μW/cm²
ELEGOO
ELEGOO Jupiter SE 6K
- 12.8-inch 6K mono LCD
- PFA Release Film
- Light Source COB light source
- Print Speed Up to 70mm/H
- XY Resolution of 51*51um
- Build Volume of 277.848*156.264*300 mm³
- 3.5-inch Capacitive Touch Screen Controller
English
العربية
