Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Brand:
ANYCUBIC
-
Brand:
BAMBU LAB
-
Brand:
ELEGOO
-
Brand:
FLASHFORGE
ELEGOO
ELEGOO Centauri Carbon 2
- 4-Color Printing Module for multi-color models
- RFID auto filament detection and syncing
- Upgraded chamber camera with Wi-Fi monitoring
- CoreXY motion system with 500 mm/s speed
- 20,000 mm/s² high-acceleration printing
- 256×256×256 mm build volume capacity
- Hardened brass-steel nozzle for CF materials
- 320°C nozzle for engineering filaments
- 110°C heated bed for strong first layers
- Supports CF, GF, ABS, PC, PA, ASA, PETG
- Triple Z-screws with linear guide rods
- 121-point auto leveling precision
- Dual-sided PEI flexible build plate
- Silent Drive motors for low noise
- Full-Auto Calibration for easy setup
ELEGOO
ELEGOO Centauri Carbon 3D Printer
- ELEGOO Centauri Carbon 3D Printer
- Build Volume 256×256×256 mm
- Fully enclosed chamber
- Max Printing Speed 500 mm/s
- Support Auto-Leveling
- Layer Thickness 0.1-0.4 mm
- 4.3-inch Capacitive Touch Screen Controller
- Max Hot End Temperature 320 °C
- Max Heated Bed Temperature 110 °C
ANYCUBIC
Anycubic Photon P1 Resin 3D Printer
- Industrial-grade ball screw for ultra-stable motion
- Supports high-viscosity resins up to 8000 cps
- Wave Release tech reduces peel force by 60%
- Precision-milled steel build plate <80 microns
- LCD alignment accuracy below 70 microns
- LighTurbo 4.0 with <2° light collimation
- Over 92% full-screen light uniformity
- Dual-material printing with optional kit
- Resin temperature control up to 40°C
- Intelligent Leveling System 3.0
- Dynamic Release System 3.0
- Light-Off Compensation 3.0
- NFEP film for smooth, consistent curing
- Remote monitoring via built-in camera
- One-click slicing in Photon Workshop 4.0
ANYCUBIC
Anycubic Photon Mono M7 Pro
- Anycubic Photon Mono M7 Pro
- Max Printing Speed 170mm/h
- 10.1'', 14K Mono LCD
- Resolution 13320 * 5120
- 5" IPS Touch Controller
- Auto Resin Refill, Withdrawal
- Auto-Adaptive Technology Control Heating
- Intelligent Workflow-Assist Printing
- Dynamic Temperature Control Resin VAT
BAMBU LAB
Bambu Lab H2S AMS Combo 3D Printer
- Large build volume 340×320×340 mm
- Multi-color printing with AMS 2 Pro
- Supports up to 24 colors & materials
- Optical calibration at 5μm accuracy
- All-metal nozzle with 350°C heat
- Heated chamber up to 65°C
- Automatic filament drying system
- 23 smart sensors & 3 AI cameras
- Print speed up to 1000 mm/s
- Servo motor with 67% more extrusion
- Optional 10W laser cutting module
- Active vibration compensation system
- Sturdy, integrated metal body design
- Ultra-quiet operation under 50 dB
![]()
BAMBU LAB
Bambu Lab H2D AMS Combo 3D Printer
- Dual-nozzle system for multi-material & multi-color printing
- Maximum print speed up to 600mm/s
- Massive build volume: 350×320×325 mm³
- High-temperature all-metal hotend: up to 350°C
- 65°C actively heated chamber for warp-free printing
- Supports over 20 materials: PLA, ABS, PETG, TPU, PC, PA
- REAL High-Flow Hotend: up to 65mm³/s flow rate
- Intelligent DynaSense Extruder with closed-loop servo control
- Automatic multi-color and multi-filament printing
- Supports up to 16 filaments
- 15-point filament monitoring system for feeding, tip location, tension & flow
- AI and Smart Features
- AI-powered pre-flight checklist
- Built-in cameras: BirdsEye, Nozzle, Toolhead
- Auto bed leveling and Z-offset calibration
- Real-time error detection (clogs, tangles, under-extrusion)
- Power loss recovery & filament runout detection
- Compatible with optional 10W / 40W laser modules
- Compatible with digital cutting blade module
- Compatible with pen plotter tool for writing/drawing
- Quick-swap toolheads with automatic recognition
- Laser Power: 10W or 40W (455nm)
- Engraving area: up to 310×270 mm
- Engraves and cuts wood, acrylic, leather, rubber, and more
- Micro Lidar for 3D mesh generation and Z-height sensing
- Built-in air assist, flame detection, and safety systems
- Digital Cutting & Drawing
- Cutting area: 300×285 mm²
- Blade pressure: 50gf to 600gf
- Supports vinyl, paper, fabric, leather, etc.
BAMBU LAB
Bambu Lab A1 Combo
- Bambu Lab A1 Combo 3D printer
- Multi-Color Printing With AMS
- Build Volume:256*256*256 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 100℃
- built-in Monitoring camera
ANYCUBIC
Anycubic Kobra 3 Max
- Anycubic Kobra 3 MAX
- With Multi Filament 3D Priting Anycubic Ace Pro
- Max Print Volume 425*425*500mm
- Max Priting Speed 600mm/s
- Max Nozzle Temp 300℃
- Max Bed Temp 110℃
- Vibration Compensation System
ELEGOO
ELEGOO OrangeStorm Giga
- ELEGOO OrangeStorm Giga
- Build Volume 800x800x1000mm
- Printing Speed 300mm/s
- Multi-Nozzle Printing
- Portable 7-inch Controller
- Multi link Printing Plate
- Max Bed Temp 90°C
- Max Extruder Temp 300℃
ANYCUBIC
Anycubic Kobra S1 Combo
- Anycubic Kobra S1 Combo
- Print Volume 250*250*250mm
- Printing Speed up to 600mm/s
- 8 Color 3D Printing
- Ultra-Quiet Printing 33dB
- Compatible with PLA, PETG, TPU，ABS, ASA
- Nozzle temperature 320°C
- Hotbed temperature 120℃
ELEGOO
ELEGOO Saturn 4 Ultra 16K
- Elegoo Saturn 4 Ultra 16K
- Build Volume 211.68*118.37*220
- 10Inch Monochrome LCD 11520*5120
- XY Resolution 19*24um
- Real-Time Monitoring Ai HD Camera
- Layer Thickness 0.01-0.2mm
- Fully Automatic Leveling
- Tilt Release Technology for faster Printing
- Printing Speed up to 150mm/h
- enhance printing by Heating tank
- Wi-Fi File Transfer & Cluster Printing
ANYCUBIC
Anycubic Photon Mono M7 Max
- Anycubic Photon Mono M7 Max
- Resin Auto-Fill Unit
- Build Volume 298x164x300mm
- 13.6 inch monochrome 7K screen
- X/Y Axis Resolution 46*46μm
- LighTurbo 3.0 High-Precision Light Source System
- Maximum print speed op to 86mm/h
- Dynamic temperature control resin vat
- Intelligence Assisted Printing System
- Light Source COB light source+ Fresnel lens
- Light Intensity 4500±10%μW/cm²
ELEGOO
ELEGOO Jupiter SE 6K
- 12.8-inch 6K mono LCD
- PFA Release Film
- Light Source COB light source
- Print Speed Up to 70mm/H
- XY Resolution of 51*51um
- Build Volume of 277.848*156.264*300 mm³
- 3.5-inch Capacitive Touch Screen Controller
ELEGOO
ELEGOO JUPITER 2 16K
- Large build volume: 302.4 × 161.98 × 300 mm
- 14-inch 16K LCD with 20×26μm XY resolution
- New dual-door design for better accessibility
- Multi-point auto-leveling system for precision
- Quick LCD replacement in just 10 minutes
- Release film replacement in only 10 seconds
- Smart resin feeding and recycling system (2kg tank)
- Heated resin vat for stable printing temperature
- Built-in camera with adaptive lighting and alerts
- Compatible with Elegoo SatelLite slicer software
ANYCUBIC
Anycubic Kobra S1 Max Combo
- Massive 350×350×350 mm³ build volume
- Fully enclosed CoreXY high-speed system
- 65 °C active chamber heating control
- 350 °C hardened steel high-temp nozzle
- Supports up to 16-color multi-printing
- ACE 2 Pro automatic refill and drying
- Prints PLA, ABS, ASA, PC, PA-CF & more
- 600 mm/s max print speed, 20 000 mm/s² accel
- Pressure advance and flow calibration
- Activated-carbon air purification filter
- 4.3″ capacitive touchscreen interface
- AI spaghetti detection & object skip
- 720 p camera for live view & timelapse
- Wi-Fi 6 / LAN / USB smart connectivity
- Power-loss recovery & filament sensor
ELEGOO
ELEGOO Mars 5 Ultra
- ELEGOO Mars 5 Ultra 3D Printer
- 7-inch 9K Mono LCD
- Printing Speed 150mm/h
- Resolution 8520x4320
- XY Resolution 18x18μm
- Smart Printing with AI Camera
- Automatic Build Plate Leveling
- Layer Thickness 0.01-0.2mm
- 9H Screen Protector
- 4.0-inch Capacitive Touch Screen Controller
- Z-AXIS Accuracy 0.02mm
- Real-Time Monitoring
BAMBU LAB
Bambu Lab X1-Carbon Combo
- Bambu Lab X1 Carbon COMBO 3D printer
- Equipped with the AMS System
- Build Volume:256×256×256mm
- High quality printing with 7 μm Lidar Resolution
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
ANYCUBIC
Anycubic Kobra 3 Combo
- Anycubic Kobra 3 Combo
- With Multi Filament 3D Priting Anycubic Ace Pro
- Max Print Volume 250*250*260mm
- Max Priting Speed 600mm/s
- Max Nozzle Temp 300℃
- Max Bed Temp 100℃
ELEGOO
ELEGOO Saturn 4 Ultra
- ELEGOO Saturn 4 Ultra Resin 3D Printer
- 10" Mono LCD 12K
- Resolution 11520*5120
- XY Resolution 19*24um
- Build Volume 218.88*122.88*220mm
- Layer Thickness 0.01-0.2mm
- Printing Speed 150mm/H
- Printing Technology : MSLA Stereo lithography
- Light Source COB + Fresnel Collimating Lens
- PFA release film
- 4-inch capacitive touch screen Controller
- Real-Time AI Monitoring And Time
- Automatic Build Plate Leveling
ANYCUBIC
Anycubic Photon Mono M5s Pro
- 10.1-inch 14K Mono LCD
- ACF Release Film
- LED matrix UV light source
- Print Speed Up to 105mm/h
- XY Resolution of 16.8*24.8μm
- Wi-Fi Transfer Speeds of 6-10Mbps
- Build Volume of 200x223.78x126.38 mm³
- 4.3-inch Capacitive Touch Screen Controller
- Equipped to Air Heater & Purifier
BAMBU LAB
Bambu Lab P1P
- Bambu Lab P1P 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab P1S Combo
- Bambu Lab P1S 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- Enclosed-body for high-temperature filament printing
- Up to 16-color printing with AMS
- built-in chamber camera
BAMBU LAB
Bambu Lab A1 mini
- Bambu Lab A1 mini 3D printer
- Build Volume:180*180*180 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 80℃
- built-in Monitoring camera
BAMBU LAB
Bambu Lab P1S
- Bambu Lab P1S 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
English
العربية
