Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Brand:
CREALITY
-
Brand:
ELEGOO
-
Brand:
FLASHFORGE
-
Brand:
FLSUN
-
Brand:
PHROZEN
CREALITY
Creality K1 SE
- Creality K1 SE 3D Printer
- Build Volume 220*220*250mm
- Printing Speed 600mm/s
- Printing Accuracy 100±0.1mm
- Nozzle Temperature ≤300℃
- Heatbed Temperature ≤100℃
- Layer Height 0.1-0.35mm
- 4.3" Touch Screen Controller
- Built in wifi
- Fully Automatic Leveling
- Power Loss Recover
- Slicing Software Creality Print 5.0, Cura, PrusaSlicer
PHROZEN
Phrozen Sonic Mega 8K V2
- Phrozen Sonic Mega 8K V2 Resin 3D Printer
- Printing Volume 33x18.5x40cm
- Printer Speed 400 layer/hr
- Automated Resin Feeder
- Two plug-in air purifiers
- 15" 8K Monochrome LCD
- XY resolution 43µm
PHROZEN
Phrozen Sonic Mighty 8K
- Phrozen Sonic Mighty 8K Resin 3D Printer
- Print Volume:21.8 x 12.3 x 23.5 cm
- Printing Speed: 70 mm/hr
- Built-in Memory
- 5" in Large Touch Control Panel
- 10" Monochrome LCD
- XY Resolution: 28 µm
- Connectivity USB | Ethernet | Wi-Fi
- Built-in HD Camera
PHROZEN
Phrozen Sonic Mini 8K
- Phrozen Sonic Mini 8K 3D Printer
- Print Volume 16.5 x 7.2 x 18 cm
- XY Resolution 22 µm
- Printing Speed 80 mm/hr
- Light Source Linear ProjectionLED Module
- 7.1” MonoChrome LCD Screen
- Frosted Laser Cut Building Plate
FLSUN
FLSUN S1 PRO
- FLSUN S1 PRO 3D Printer
- Max Printing Speed 1200mm/s
- Max Build Volume Φ320*430mm
- Fine Printing with FLSUN Algorithms 2.0 and AI Inspection
- Fully Automatic Leveling
- Quieter down to 55dB
- Max Nozzle Temp 350℃
- Max Bed Temp 120℃
- Dual-Gear Direct Drive Extruder
- Printing Accuracy 0.1mm
- Layer Height 0.1-0.35mm
ELEGOO
ELEGOO Centauri 3D Printer
- ELEGOO Centauri 3D Printer
- Build Volume 256×256×256 mm
- Max Printing Speed 500 mm/s
- Support Auto-Leveling
- Layer Thickness 0.1-0.4 mm
- 4.3-inch Capacitive Touch Screen Controller
- Max Hot End Temperature 320 °C
- Max Heated Bed Temperature 110 °C
CREALITY
Creality K2 Standard 3D Printer
- 260×260×260 mm large build volume
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
CREALITY
Creality K2 PRO Standard 3D Printer
- 300×300×300 mm large build volume
- Equipped with a heated print chamber
- 32GB EMMC File Storage
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
ELEGOO
ELEGOO JUPITER 2 16K
- Large build volume: 302.4 × 161.98 × 300 mm
- 14-inch 16K LCD with 20×26μm XY resolution
- New dual-door design for better accessibility
- Multi-point auto-leveling system for precision
- Quick LCD replacement in just 10 minutes
- Release film replacement in only 10 seconds
- Smart resin feeding and recycling system (2kg tank)
- Heated resin vat for stable printing temperature
- Built-in camera with adaptive lighting and alerts
- Compatible with Elegoo SatelLite slicer software
ELEGOO
ELEGOO Centauri Carbon 2
- 4-Color Printing Module for multi-color models
- RFID auto filament detection and syncing
- Upgraded chamber camera with Wi-Fi monitoring
- CoreXY motion system with 500 mm/s speed
- 20,000 mm/s² high-acceleration printing
- 256×256×256 mm build volume capacity
- Hardened brass-steel nozzle for CF materials
- 320°C nozzle for engineering filaments
- 110°C heated bed for strong first layers
- Supports CF, GF, ABS, PC, PA, ASA, PETG
- Triple Z-screws with linear guide rods
- 121-point auto leveling precision
- Dual-sided PEI flexible build plate
- Silent Drive motors for low noise
- Full-Auto Calibration for easy setup
English
العربية
