Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Brand:
ANYCUBIC
-
Brand:
BAMBU LAB
-
Brand:
CREALITY
CREALITY
Creality CR-10 SE
- Creality CR-10 SE 3D Printer
- Build Volume 220*220*625mm
- Priting Speed 600mm/s
- Max Nozzle Temp 300°C
- Max Bed Temp 110°C
- 4.3 Touch Screen Controller
- Layer Thickness 0.1~0.35mm
- Auto Bed Leveling With CR Touch Sensor
- Hardened steel nozzle
CREALITY
Creality HALOT-MAGE S 14K
- Creality HALOT-MAGE S 14K Resin 3D Printer
- 10.1" LCD with 14K Resolution
- Dynax+ Mode for 150mm/h Speed
- Build Volume: 223*126*230mm
- Layer Height: 0.05-0.2mm
- Mono LCD Resolution 13320*5120
- XY Resolution: 16.8*24.8μm
- Light Intensity: 3500±10%μW/cm²
- Release Film: FEP
- Integral Light Source 3.0
ANYCUBIC
Anycubic Kobra 3
- Anycubic Kobra 3
- Max Print Volume 250*250*260mm
- Max Priting Speed 600mm/s
- Max Nozzle Temp 300℃
- Max Bed Temp 100℃
- 4.3-inch Touch Controller
- Hardened Steel Extruder Gear
- Automatic hot bed leveling
- Quick Swap Nozzle
CREALITY
Creality K1 SE
- Creality K1 SE 3D Printer
- Build Volume 220*220*250mm
- Printing Speed 600mm/s
- Printing Accuracy 100±0.1mm
- Nozzle Temperature ≤300℃
- Heatbed Temperature ≤100℃
- Layer Height 0.1-0.35mm
- 4.3" Touch Screen Controller
- Built in wifi
- Fully Automatic Leveling
- Power Loss Recover
- Slicing Software Creality Print 5.0, Cura, PrusaSlicer
ANYCUBIC
Anycubic Photon Mono 4
- Anycubic Photon Mono 4 Resin 3D Printer
- 7 Inches 10K Monochrome LCD
- Resolution 9024x5120 Pixel
- Xy resolution 17*17μm
- 2.8" Touch Screen Controller
- Light intensity ~3000μW /cm²
- 4-point manual Printing Plate leveling
- LighTurbo Light Source
- Max Printing Volume 153.4*87*165mm
- Layer height 0.03-0.15mm
- Printing Speed up to 70mm/h
ANYCUBIC
Anycubic Photon Mono 4 Ultra
- Anycubic Photon Mono 4 Ultra
- 7 Inches 10K MonoChrome LCD
- XY 17*17μm
- Printing Speed Up to 80-120mm/h
- Priting Volume 153.4*87*165 mm
- COB Light Source
- ACF Release Film
- 4 Point Manual Leveling
- WiFi6 and Lan Connectivity
- 4.3Inch Touch screen controller
- Internal Air Purifier
ANYCUBIC
Anycubic Kobra S1
- Anycubic Kobra S1
- Print Volume 250*250*250mm
- Printing Speed up to 600mm/s
- Ultra-Quiet Printing 33dB
- Compatible with PLA, PETG, TPU，ABS, ASA
- Nozzle temperature 320°C
- Hotbed temperature 120℃
BAMBU LAB
Bambu Lab H2D 3D Printer
- Bambu Lab H2D 3D Printer
- Dual-nozzle printing
- 350×320×325 mm³ print volume
- 350°C nozzle & 65°C chamber heat
- Optional 10W/40W laser module
- Digital cutter and pen support
- 600 mm/s high-speed printing
- AI-powered nozzle and top cameras
- 5μm optical motion calibration
- Servo-controlled DynaSense extruder
- Auto pre-flight check and alignment
BAMBU LAB
Bambu H2D Laser Full Combo
- Bambu H2D Laser Full Combo
- Optional 10W/40W Laser and Cutting Module
- Multi-material 3D Printing
- Dual-nozzle printing
- 350×320×325 mm³ print volume
- 350°C nozzle & 65°C chamber heat
- Optional 10W/40W laser module
- Digital cutter and pen support
- 600 mm/s high-speed printing
- AI-powered nozzle and top cameras
- 5μm optical motion calibration
- Servo-controlled DynaSense extruder
- Auto pre-flight check and alignment
BAMBU LAB
Bambu Lab H2S 3D Printer
- 340×320×340mm³ large build volume
- AI-powered optical motion calibration
- Motion accuracy under 50 microns
- 350°C all-metal hotend for engineering filaments
- 65°C actively heated print chamber
- 23 smart sensors with 3 onboard cameras
- Full-path AI filament monitoring system
- High-speed printing up to 1000 mm/s
- Active vibration compensation technology
- Integrated air filtration & smart venting
- Durable die-cast aluminum frame design
- Cloud & offline control with developer mode
BAMBU LAB
Bambu Lab H2S Laser Full Combo
- Large build volume 340×320×340 mm
- Multi-color printing with AMS 2 Pro
- 10W Laser and Cutting Module
- Supports up to 24 colors & materials
- Optical calibration at 5μm accuracy
- All-metal nozzle with 350°C heat
- Heated chamber up to 65°C
- Automatic filament drying system
- 23 smart sensors & 3 AI cameras
- Print speed up to 1000 mm/s
- Servo motor with 67% more extrusion
- Optional 10W laser cutting module
- Active vibration compensation system
- Sturdy, integrated metal body design
- Ultra-quiet operation under 50 dB
BAMBU LAB
Bambu Lab P2S 3D Printer
- 256×256×256 mm build volume for large models
- Print speed up to 600 mm/s with precision
- Multi-color printing with 4 filament support
- 5-inch touchscreen with 2nd-gen smart UI
- PMSM extruder – 70% more extrusion force
- Auto flow dynamics calibration system
- Cold-air cooling for perfect overhangs
- 50°C chamber for engineering materials
- AI-powered error detection & monitoring
- Quick-swap nozzle in under 30 seconds
- Hardened steel nozzle and extruder gear
- AMS 2 Pro with active filament drying
- 1080p camera for live view & timelapse
- Compatible with PLA, ABS, PETG, TPU, CF
BAMBU LAB
Bambu Lab H2C 3D Printer
- Vortek hotend swap with zero color bleed
- Ultra-low purge waste at only 532g
- Up to 24 materials in one print
- Six-color system with support nozzle
- 8-second induction nozzle heating
- 10kg PMSM high-torque extruder
- 50µm ultra-fine motion accuracy
- TPU joints for functional mechanisms
- 65°C active heated chamber
- Triple-stage air filtration system
- Fully automated nozzle calibration
- AI monitoring with multi-camera vision
- 1000mm/s high-speed printing
- Contactless hotend connection design
- Ideal for engineering-grade materials
English
العربية
