Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Availability:
Not available
-
Brand:
ANYCUBIC
-
Brand:
BAMBU LAB
-
Brand:
CREALITY
CREALITY
Creality Ender-3 V3 SE
- Creality Ender-3 V3 SE 3D Printer
- Build Volume:220*220*250mm
- Max Printing Speed:250mm/s
- Max Nozzle Temperature 260℃
- Max Heatbed Temperature:≤100℃
- Printing Accuracy:±0.1mm
- 3.2'' Color Knob Screen Controller
ANYCUBIC
Anycubic Kobra 2 Neo
- Anycubic Kobra 2 Neo 3D Printer
- Printing Volume 250*220*220mm
- Max Printing Speed 250mm/s
- Automatic Bed Leveling LeviQ 2.0 25 Points
- Max Nozzle Temp 260°C
- Max Bed Temp 110°C
- 2.4" LCD Knob-Control
CREALITY
Creality Ender-5 S1
- Creality Ender-5 S1 3D Printer
- Build Volume 220*220*280mm
- Printing Speed 250mm/s
- Max Nozzle Temp 300℃
- Max Bed Temp 110℃
- CR Touch auto-leveling
- 4.3" Touch Screen Controller
- Printing Accuracy ±0.1mm
CREALITY
Creality Ender-3 S1 Pro
- Creality Ender-3 S1 Pro 3D Printer
- Build Volume 220*220*270mm
- Max Printing Speed 160mm/s
- Max Nozzle Temp 300°C
- Max Bed Temp 110°C
- Layer Thickness 0.1-0.35mm
- Printing Precision 0.1mm
- CR Touch Auto Bed Leveling
CREALITY
Creality CR-10 SE
- Creality CR-10 SE 3D Printer
- Build Volume 220*220*625mm
- Priting Speed 600mm/s
- Max Nozzle Temp 300°C
- Max Bed Temp 110°C
- 4.3 Touch Screen Controller
- Layer Thickness 0.1~0.35mm
- Auto Bed Leveling With CR Touch Sensor
- Hardened steel nozzle
CREALITY
Creality HALOT-MAGE S 14K
- Creality HALOT-MAGE S 14K Resin 3D Printer
- 10.1" LCD with 14K Resolution
- Dynax+ Mode for 150mm/h Speed
- Build Volume: 223*126*230mm
- Layer Height: 0.05-0.2mm
- Mono LCD Resolution 13320*5120
- XY Resolution: 16.8*24.8μm
- Light Intensity: 3500±10%μW/cm²
- Release Film: FEP
- Integral Light Source 3.0
ANYCUBIC
Anycubic Kobra 3
- Anycubic Kobra 3
- Max Print Volume 250*250*260mm
- Max Priting Speed 600mm/s
- Max Nozzle Temp 300℃
- Max Bed Temp 100℃
- 4.3-inch Touch Controller
- Hardened Steel Extruder Gear
- Automatic hot bed leveling
- Quick Swap Nozzle
CREALITY
Creality K1 SE
- Creality K1 SE 3D Printer
- Build Volume 220*220*250mm
- Printing Speed 600mm/s
- Printing Accuracy 100±0.1mm
- Nozzle Temperature ≤300℃
- Heatbed Temperature ≤100℃
- Layer Height 0.1-0.35mm
- 4.3" Touch Screen Controller
- Built in wifi
- Fully Automatic Leveling
- Power Loss Recover
- Slicing Software Creality Print 5.0, Cura, PrusaSlicer
ANYCUBIC
Anycubic Photon Mono 4
- Anycubic Photon Mono 4 Resin 3D Printer
- 7 Inches 10K Monochrome LCD
- Resolution 9024x5120 Pixel
- Xy resolution 17*17μm
- 2.8" Touch Screen Controller
- Light intensity ~3000μW /cm²
- 4-point manual Printing Plate leveling
- LighTurbo Light Source
- Max Printing Volume 153.4*87*165mm
- Layer height 0.03-0.15mm
- Printing Speed up to 70mm/h
ANYCUBIC
Anycubic Photon Mono 4 Ultra
- Anycubic Photon Mono 4 Ultra
- 7 Inches 10K MonoChrome LCD
- XY 17*17μm
- Printing Speed Up to 80-120mm/h
- Priting Volume 153.4*87*165 mm
- COB Light Source
- ACF Release Film
- 4 Point Manual Leveling
- WiFi6 and Lan Connectivity
- 4.3Inch Touch screen controller
- Internal Air Purifier
ANYCUBIC
Anycubic Kobra 3 Max
- Anycubic Kobra 3 MAX
- With Multi Filament 3D Priting Anycubic Ace Pro
- Max Print Volume 425*425*500mm
- Max Priting Speed 600mm/s
- Max Nozzle Temp 300℃
- Max Bed Temp 110℃
- Vibration Compensation System
ANYCUBIC
Anycubic Kobra S1
- Anycubic Kobra S1
- Print Volume 250*250*250mm
- Printing Speed up to 600mm/s
- Ultra-Quiet Printing 33dB
- Compatible with PLA, PETG, TPU，ABS, ASA
- Nozzle temperature 320°C
- Hotbed temperature 120℃
BAMBU LAB
Bambu Lab H2D 3D Printer
- Bambu Lab H2D 3D Printer
- Dual-nozzle printing
- 350×320×325 mm³ print volume
- 350°C nozzle & 65°C chamber heat
- Optional 10W/40W laser module
- Digital cutter and pen support
- 600 mm/s high-speed printing
- AI-powered nozzle and top cameras
- 5μm optical motion calibration
- Servo-controlled DynaSense extruder
- Auto pre-flight check and alignment
BAMBU LAB
Bambu H2D Laser Full Combo
- Bambu H2D Laser Full Combo
- Optional 10W/40W Laser and Cutting Module
- Multi-material 3D Printing
- Dual-nozzle printing
- 350×320×325 mm³ print volume
- 350°C nozzle & 65°C chamber heat
- Optional 10W/40W laser module
- Digital cutter and pen support
- 600 mm/s high-speed printing
- AI-powered nozzle and top cameras
- 5μm optical motion calibration
- Servo-controlled DynaSense extruder
- Auto pre-flight check and alignment
BAMBU LAB
Bambu Lab H2S 3D Printer
- 340×320×340mm³ large build volume
- AI-powered optical motion calibration
- Motion accuracy under 50 microns
- 350°C all-metal hotend for engineering filaments
- 65°C actively heated print chamber
- 23 smart sensors with 3 onboard cameras
- Full-path AI filament monitoring system
- High-speed printing up to 1000 mm/s
- Active vibration compensation technology
- Integrated air filtration & smart venting
- Durable die-cast aluminum frame design
- Cloud & offline control with developer mode
BAMBU LAB
Bambu Lab H2S Laser Full Combo
- Large build volume 340×320×340 mm
- Multi-color printing with AMS 2 Pro
- 10W Laser and Cutting Module
- Supports up to 24 colors & materials
- Optical calibration at 5μm accuracy
- All-metal nozzle with 350°C heat
- Heated chamber up to 65°C
- Automatic filament drying system
- 23 smart sensors & 3 AI cameras
- Print speed up to 1000 mm/s
- Servo motor with 67% more extrusion
- Optional 10W laser cutting module
- Active vibration compensation system
- Sturdy, integrated metal body design
- Ultra-quiet operation under 50 dB
BAMBU LAB
Bambu Lab P2S 3D Printer
- 256×256×256 mm build volume for large models
- Print speed up to 600 mm/s with precision
- Multi-color printing with 4 filament support
- 5-inch touchscreen with 2nd-gen smart UI
- PMSM extruder – 70% more extrusion force
- Auto flow dynamics calibration system
- Cold-air cooling for perfect overhangs
- 50°C chamber for engineering materials
- AI-powered error detection & monitoring
- Quick-swap nozzle in under 30 seconds
- Hardened steel nozzle and extruder gear
- AMS 2 Pro with active filament drying
- 1080p camera for live view & timelapse
- Compatible with PLA, ABS, PETG, TPU, CF
ANYCUBIC
Anycubic Kobra S1 Max Combo
- Massive 350×350×350 mm³ build volume
- Fully enclosed CoreXY high-speed system
- 65 °C active chamber heating control
- 350 °C hardened steel high-temp nozzle
- Supports up to 16-color multi-printing
- ACE 2 Pro automatic refill and drying
- Prints PLA, ABS, ASA, PC, PA-CF & more
- 600 mm/s max print speed, 20 000 mm/s² accel
- Pressure advance and flow calibration
- Activated-carbon air purification filter
- 4.3″ capacitive touchscreen interface
- AI spaghetti detection & object skip
- 720 p camera for live view & timelapse
- Wi-Fi 6 / LAN / USB smart connectivity
- Power-loss recovery & filament sensor
BAMBU LAB
Bambu Lab H2C 3D Printer
- Vortek hotend swap with zero color bleed
- Ultra-low purge waste at only 532g
- Up to 24 materials in one print
- Six-color system with support nozzle
- 8-second induction nozzle heating
- 10kg PMSM high-torque extruder
- 50µm ultra-fine motion accuracy
- TPU joints for functional mechanisms
- 65°C active heated chamber
- Triple-stage air filtration system
- Fully automated nozzle calibration
- AI monitoring with multi-camera vision
- 1000mm/s high-speed printing
- Contactless hotend connection design
- Ideal for engineering-grade materials
ANYCUBIC
Anycubic Photon P1 Resin 3D Printer
- Industrial-grade ball screw for ultra-stable motion
- Supports high-viscosity resins up to 8000 cps
- Wave Release tech reduces peel force by 60%
- Precision-milled steel build plate <80 microns
- LCD alignment accuracy below 70 microns
- LighTurbo 4.0 with <2° light collimation
- Over 92% full-screen light uniformity
- Dual-material printing with optional kit
- Resin temperature control up to 40°C
- Intelligent Leveling System 3.0
- Dynamic Release System 3.0
- Light-Off Compensation 3.0
- NFEP film for smooth, consistent curing
- Remote monitoring via built-in camera
- One-click slicing in Photon Workshop 4.0
CREALITY
CREALITY SPARKX i7 COMBO
- CREALITY SPARKX i7 COMBO
- Build Volume: 260×260×255 mm
- Max Speed: ≤500 mm/s
- Acceleration: ≤10000 mm/s²
- Extruder: Direct Drive
- Nozzle System: Quick-Swap Hotend
- Supported Nozzles: 0.2 / 0.4 / 0.6 / 0.8 mm
- Input Shaping + Pressure Advance
- AI Camera: 720p with Smart Detection
- Auto Leveling and Z-Offset Calibration
- Print Surface: Dual-sided PEI Plate
- Compatible Materials: PLA, PETG, TPU, PLA-CF
- Connectivity: Wi-Fi, USB Drive, RS-485
- Storage: 8G EMMC + Creality OS
- CFS Lite / CFS Mini Multicolor Support
English
العربية
