Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Availability:
Not available
-
Categories:
Filamets
-
Categories:
Power Solutions
Zoupw
ZOUPW 450 Watt Portable Solar Panel N-Type...
- 450W high-power solar charging output
- 25% efficiency with N-Type 16BB cells
- Premium monocrystalline solar cells
- Excellent low-light performance
- Advanced 16BB cell technology
- Smart bypass diodes for safer use
- Up to 10% better shade performance
- Durable ETFE weatherproof surface
- IP68 protection for outdoor use
- Foldable and lightweight design
- 20% lighter than standard panels
- Strong anodized aluminum frame
- Wide connector compatibility
- Includes cables, bag, and 3-year warranty
eSUN
eSun eTPU-95A
- eSun eTPU-95A Filament
- Flexible and soft
- Sturdy and durable
- Compatible with all of 3D Printers
- Extruder Temp 220-250℃
- Bed Temp 40-60℃
- Printing Speed 50mm/s
- Duribility 90%
Zoupw
ZOUPW 400 Watt Portable Solar Panel N-Type...
- 400W powerful solar charging output
- 25% conversion efficiency
- Advanced N-Type 16BB solar cells
- Premium monocrystalline cells
- Excellent low-light performance
- Stable output in cloudy weather
- Smart parallel wiring design
- Reinforced adjustable kickstands
- 5000+ fold cycle durability
- ETFE waterproof surface
- IP68 outdoor protection
- Foldable and lightweight build
- Strong anodized aluminum frame
- Wide connector compatibility
- Includes bag, cables, and warranty
Bluetti
BLUETTI Apex 300 Versatile Power Station
- 2,764.8Wh base battery, expandable to 58kWh
- 3,840W output with 7,680W surge power
- Expandable output up to 11.52kW
- 20ms UPS seamless backup switching
- Industry-first 12kW bypass support
- Up to 19.2kW solar input support
- 2,400W fast solar charging input
- LiFePO₄ battery with 6,000+ cycles
- Up to 17 years battery lifespan
- Smart app control via Wi-Fi & Bluetooth
- Supports home, RV, and off-grid use
- Ultra-low self-consumption design
- Fast AC and generator charging
- Durable compact premium build
- 5-year official BLUETTI warranty
ELEGOO
ELEGOO Rapid PETG
- High-speed printing up to 600 mm/s
- ±0.02 mm precise dimensional accuracy
- Strong impact and tensile strength
- Water and weather resistant material
- Low warping and smooth extrusion
- No clogging and bubble-free printing
- Eco-friendly cardboard spool
- Vacuum sealed with desiccant
- Excellent layer adhesion
- Wide FDM printer compatibility
- Heat formable for post-processing
- Optimized for rapid production
- Durable for outdoor applications
- Balanced PLA ease with ABS strength
Bluetti
BLUETTI Elite 300 Portable Power Station
- 3,014Wh long-life LiFePO₄ battery
- 2,400W output, 4,800W surge power
- World’s smallest 3kWh power station
- 21% lighter than similar 3kWh units
- 12V/30A DC port for campervan use
- 2,300W ultra-fast AC charging
- Up to 1,200W solar charging input
- Supports combined AC + DC charging
- 10ms UPS instant backup switching
- Bluetooth & Wi-Fi smart app control
- 6,000+ battery cycles to 80%
- Compact and travel-friendly design
- Pass-through charging supported
- 5-year official warranty coverage
CREALITY
Creality CR-Wood Printing Filament
- Natural wood texture with realistic grain look
- Premium wood color for artistic 3D prints
- PLA-based and environmentally friendly material
- Non-toxic and odorless during printing
- Stable printing with low shrinkage rate
- Warp-free performance for flat models
- Smooth feeding with neat filament winding
- Reduced clogging for reliable extrusion
- Easy to print on standard FDM printers
- Wide compatibility with common print beds
- Flexible printing temperature range
- Suitable for decorative and creative projects
- Clean surface finish with wood appearance
- Ideal for crafts, models, and gifts
Zoupw
ZOUPW 350 Watt Portable Solar Panel
- 400W powerful solar charging output
- 25% conversion efficiency
- Advanced N-Type 16BB solar cells
- Premium monocrystalline cells
- Excellent low-light performance
- Stable output in cloudy weather
- Smart parallel wiring design
- Reinforced adjustable kickstands
- 5000+ fold cycle durability
- ETFE waterproof surface
- IP68 outdoor protection
- Foldable and lightweight build
- Strong anodized aluminum frame
- Wide connector compatibility
- Includes bag, cables, and warranty
CREALITY
Creality Hyper PLA RFID 3D Printing Filament
- 10× faster printing, up to 600 mm/s speed
- High-fluidity formula for smooth extrusion
- Rapid cooling for precise high-speed shaping
- Higher tensile strength than ABS
- Tougher and stronger than standard PLA
- Consistent diameter 1.75 mm ±0.03 mm
- Two-way laser diameter measurement
- Neatly spooled to prevent tangling
- Stable extrusion for long print jobs
- Smart RFID for auto filament recognition
- Optimized for Creality high-speed printers
- Premium raw materials with strict QC
ELEGOO
ELEGOO RAPID PLA Plus Filament
- Ultra-fast printing speed up to 600mm/s
- Enhanced toughness and high tensile strength
- Strong layer adhesion for smooth surfaces
- ±0.02mm high dimensional accuracy
- Tangle-free spools for uninterrupted printing
- Vacuum-sealed to prevent moisture and bubbles
- Eco-friendly biodegradable cardboard spool
- Wide compatibility with 1.75mm FDM printers
- Produces glossy, smooth, high-quality finishes
- Ideal for prototypes, models, and mass printing
eSUN
eSun PLA+
- eSun PLA+ 1.75mm Filament
- Enhanced durability and resilience
- Versatile printer compatibility
- Superb layer bonding for optimal prints
- Recommended Printing Temperature: 210 - 230 °C
- Recommended Bed Temperature: 45 - 60°C
- Density 1.23 g/cm3
- Tensile Strength 60MPa
- Elongation at Break 60%
CREALITY
Creality Hyper Series PLA
- Creality Hyper Series PLA 1.75mm Filament
- 10x Faster Printing
- Keep Precision While Keeping Ultra-high Speed
- Strengthen Models with Enhanced Toughness
- Recommended Printing Temperature: 190 - 230 °C
- Recommended Bed Temperature: 25 - 60°C
eSUN
eSun ePLA-Silk Magic
- eSun ePLA-Silk Magic
- Different Colors at Different Angles
- Extruder Temp 210-230°C
- Bed Temp 45-60°C
- Density 1.256cm3
- Tensil Strength 57.64
- Durability 40%
- Printability 90%
CREALITY
Creality&BASF Ultra Series PLA
- Creality&BASF Ultra Series PLA 1.75mm Filament
- Faster cooling and shaping
- Higher accuracy
- Faster Priting Speed 600mm/s
- Recommended Printing Temperature: 200-230℃
- Recommended Bed Temperature: 25 - 60°C
ANYCUBIC
Anycubic PLA Basic
- Anycubic PLA Basic 3D Printer Filament
- Neat Spool and No Tangle
- High Precision and Accuracy
- Eco-Friendly, Biodegradable
ANYCUBIC
Anycubic PLA High Speed
- Anycubic PLA High Speed
- Priting Up to 500mm/s
- Enhanced Fluidity and Better Cooling Effect
ANYCUBIC
Anycubic PLA Silk
- Anycubic PLA Silk Filament
- Silk Feel and Lustre
- Eco-Friendly, Biodegradable
- Widely Applicable to Printers
ANYCUBIC
Anycubic PLA+
- Anycubic PLA+ 3D Pinter Filament
- High Toughness
- High precision and minimal shrinkage
- Eco-Friendly
- Compatible with all of FDM 3D Printer
eSUN
eSUN PETG
- eSun PETG Filament
- Resistant to Variety of Chemicals
- High Precision Printing
- Density 1.27
- Heat Distortion Temp 64
- Tensin Strength 52.2 MPa
- Elogation at Break 83%
- Extruder Temp 230-250
- Bed Temp 75~950
eSUN
eSUN ABS
- eSUN ABS Filament
- Unbelievable Toughness
- Impact resistance
- Heat resistance
- Density(g/cm3) 1.04
- Heat Distortion 78℃ 0.45MPa
- Melt Flow Index(g/10min) 12(220℃/10kg）
- Tensile Strength 43MPa
- Elongation at Break 22%
- Extruder Temp 230 – 270℃
- Bed Temp 95 – 110°C
eSUN
eSun eTPU-HS
- eSun eTPU-HS Filament
- Flexible and soft
- High elasticity
- High toughness
- Nozzle Temp 220~250°C
- Bed Temp 45~60°C
- Durability 90%
- Printing Speed 50 – 200mm/s
- Build Surface : Masking paper, PVP solid glue, PEI
eSUN
eSUN ePLA-HS
- eSun ePLA-HS Filament
- Suitable for high-speed printing
- Smooth flow without blocking
- Quick Cooling and forming
- Density 1.24 g/cm3
- Extruder Temp 210-230
- Bed Temp 45-60
- Printing Speed 350mm/s
eSUN
eSUN ABS+
- eSUN ABS+ Filament
- Density 1.06g/cm³
- Heat Distortion 73
- Tensil Strength 40%
- Extruder Temp 230~270
- Bed Temp 95~110
eSUN
eSun ePLA-Matte
- eSun ePLA-Matte Filament
- Matte surface effect
- High-speed printing
- Easy to peel off the support
- Excellent printability
- Prop Bed Temp 45~60
- Prop Extruder Temp 190~230
- Density 1.329 g/cm³
- Elongation at break 50%
ANYCUBIC
Anycubic PETG Filament
- Anycubic PETG Filament
- Strong and Durable
- Clear and Vibrant
- Prop Bed Temp 75~90℃
- Prop Nozzle Temp 230~250℃
eSUN
eSun ePLA-Metal
- eSun ePLA-Metal Filament
- Metallic glossy texture
- Excellent printability
- Smooth surface
- Prop Nozzle Temp 190 – 230℃
- Prop Bed Temp 45 – 60°C
- Density 1.255 g/cm3
- Heat Distortion Temp 53℃
- Tensile Strength 63.16 MPa
eSUN
eSun ePLA-Silk Mystic
- eSun ePLA-Silk Mystic
- Mystery Three-color
- Silk glossy texture
- Excellent printability
- Prop Extruder Temp 190 – 230℃
- Prop Bed Temp 45 – 60°C
- Tensile Strength 57.64 MPa
- Density 1.256 g/cm3
- Flexural Strength Mpa
ELEGOO
ELEGOO PLA Filament
- ELEGOO PLA Filament
- Density 1.20g/cm³
- Charpy impact 5.4kj/m²
- Termal Deformation Temp 53°C
- Prop Extruder Temp 190~220°C
- Prop Bed Temp 50-65°C
- Priting Speed 30-70mm/s
- Elongation at Break 11.2%
- Tensile Strength 50MPa
ELEGOO
ELEGOO PLA Special Colored
- ELEGOO PLA Special Colored
- Density 1.20g/cm³
- Charpy impact 5.4kj/m²
- Termal Deformation Temp 53°C
- Prop Extruder Temp 190~220°C
- Prop Bed Temp 50-65°C
- Priting Speed 30-70mm/s
- Elongation at Break 11.2%
- Tensile Strength 50MPa
ELEGOO
ELEGOO Silk PLA
- ELEGOO ELEGOO Silk PLA
- Density 1.20g/cm³
- Charpy impact 5.4kj/m²
- Termal Deformation Temp 53°C
- Prop Extruder Temp 190~220°C
- Prop Bed Temp 50-65°C
- Priting Speed 30-70mm/s
- Elongation at Break 11.2%
- Tensile Strength 50MPa
ANYCUBIC
Anycubic PLA Pantone
- Anycubic PLA Pantone
- Co-Created with Pantone Color Institute
- Density 1.23g/cm³
- Tensile Strength 60MPa
- Eco-friendly
- +0.02mm precision
- Prop Extruder Temp 200~210°C
- Prop Bed Temp 50-60°C
BAMBU LAB
Bambu Lab PLA CMYK Lithophane Bundle
- Bambu Lab PLA CMYK Lithophane Bundle
- MakeMake Colorful 3D Models
- Include Jade White,Basic Yellow,Basic Magenta,Basic Cyan
- Recommended Printing Temperature: 210 - 230 °C
- Recommended Bed Temperature: 45 - 60°C
- Compatible With All kind of 3D Printer
- Density 1.24 g/cm3
BAMBU LAB
Bambu Lab PLA Metal
- Bambu Lab PLA Metal
- Metal Surface Texture & Metallic Shine
- High impact strength
- Recommended Printing Temperature: 210 - 230 °C
- Recommended Bed Temperature: 45 - 60°C
- Compatible With All kind of 3D Printer
- Density 1.24 g/cm3
BAMBU LAB
Bambu Lab PLA Matte
- Bambu Lab PLA Matte
- Matte Surface Texture
- Recommended Printing Temperature: 210 - 230 °C
- Recommended Bed Temperature: 45 - 60°C
- Compatible With All kind of 3D Printer
- Density 1.24 g/cm3
Polymaker
Polymaker PolyTerra PLA
- Polymaker PolyTerra PLA
- Eco-Friendly
- A World of Color & Effects
- Printing Speed 30mm/s - 70mm/s
- Prop Bed Temperature: 25˚C - 60˚C
- Printing Temperature: 190˚C - 230˚C
- Jam-Free Technology
English
العربية
