Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Categories:
Filamets
-
Categories:
Laser Engravers
-
Brand:
ComMarker
-
Brand:
ELEGOO
ComMarker
ComMarker Omni X Laser Engraver
- 16K HD UV Laser Engraving Precision
- Ultra-Fine 0.0019mm Laser Spot Size
- ZeroBurn™ Technology – No Scorch Marks
- LiDAR Autofocus with 0.001mm Accuracy
- SpeedMax™ Engraving up to 10,000mm/s
- 3D Internal Crystal Engraving Supported
- ColdFront™ 2.0 Thermal Cooling System
- SmoothRoll™ 360° Rotary Engraving
- ImagePlus™ AI for Photo-Realistic Engraving
- Supports Over 100+ Engravable Materials
- Full-Metal Body for Maximum Stability
- Slide Extension for 150×400mm Work Area
- Class-1 Laser Safety Certification
- USB & Wi-Fi Smart Connectivity
ELEGOO
Elegoo Phecda Laser Engraver & Cutter 10W
- Elegoo Phecda Laser Engraver & Cutter 10W
- 400x400 mm Engraving Area
- Up to 25,000 mm/min Engraving Speed
- Smoke Filtering Exhaust
- Multiple Operation Methods
- Laser wavelength 455±5nm
- Maximum cuttingdepth ≤8mm Basswood Board
- Laser Spot size 0.06mm×0.06mm
- Expandable Functions Rotary Attachment, Air Assist
ELEGOO
Elegoo Phecda Laser Engraver & Cutter 20W
- Elegoo Phecda Laser Engraver & Cutter 20W
- 400x400 mm Engraving Area
- Up to 25,000 mm/min Engraving Speed
- Smoke Filtering Exhaust
- Multiple Operation Methods
- Laser wavelength 455±5nm
- Maximum cuttingdepth ≤14mm Basswood Board
- Laser Spot size 0.07x0.13mm
- Expandable Functions Rotary Attachment, Air Assist
ELEGOO
ELEGOO PLA Filament
- ELEGOO PLA Filament
- Density 1.20g/cm³
- Charpy impact 5.4kj/m²
- Termal Deformation Temp 53°C
- Prop Extruder Temp 190~220°C
- Prop Bed Temp 50-65°C
- Priting Speed 30-70mm/s
- Elongation at Break 11.2%
- Tensile Strength 50MPa
ELEGOO
ELEGOO PLA Special Colored
- ELEGOO PLA Special Colored
- Density 1.20g/cm³
- Charpy impact 5.4kj/m²
- Termal Deformation Temp 53°C
- Prop Extruder Temp 190~220°C
- Prop Bed Temp 50-65°C
- Priting Speed 30-70mm/s
- Elongation at Break 11.2%
- Tensile Strength 50MPa
ELEGOO
ELEGOO Silk PLA
- ELEGOO ELEGOO Silk PLA
- Density 1.20g/cm³
- Charpy impact 5.4kj/m²
- Termal Deformation Temp 53°C
- Prop Extruder Temp 190~220°C
- Prop Bed Temp 50-65°C
- Priting Speed 30-70mm/s
- Elongation at Break 11.2%
- Tensile Strength 50MPa
ELEGOO
ELEGOO RAPID PLA Plus Filament
- Ultra-fast printing speed up to 600mm/s
- Enhanced toughness and high tensile strength
- Strong layer adhesion for smooth surfaces
- ±0.02mm high dimensional accuracy
- Tangle-free spools for uninterrupted printing
- Vacuum-sealed to prevent moisture and bubbles
- Eco-friendly biodegradable cardboard spool
- Wide compatibility with 1.75mm FDM printers
- Produces glossy, smooth, high-quality finishes
- Ideal for prototypes, models, and mass printing
English
العربية
