Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Categories:
3D Printer Accs
-
Categories:
Filamets
-
Brand:
CREALITY
-
Brand:
ELEGOO
CREALITY
Creality Hyper PLA RFID 3D Printing Filament
- 10× faster printing, up to 600 mm/s speed
- High-fluidity formula for smooth extrusion
- Rapid cooling for precise high-speed shaping
- Higher tensile strength than ABS
- Tougher and stronger than standard PLA
- Consistent diameter 1.75 mm ±0.03 mm
- Two-way laser diameter measurement
- Neatly spooled to prevent tangling
- Stable extrusion for long print jobs
- Smart RFID for auto filament recognition
- Optimized for Creality high-speed printers
- Premium raw materials with strict QC
CREALITY
Creality Space Pi Filament Dryer
- Creality Space Pi Filament Dryer
- 360° Hot-air Heating
- Real-time humidity & temperature monitoring
- Drying time setting 0-48h
- One-key set for 12 filaments
ELEGOO
ELEGOO RAPID PLA Plus Filament
- Ultra-fast printing speed up to 600mm/s
- Enhanced toughness and high tensile strength
- Strong layer adhesion for smooth surfaces
- ±0.02mm high dimensional accuracy
- Tangle-free spools for uninterrupted printing
- Vacuum-sealed to prevent moisture and bubbles
- Eco-friendly biodegradable cardboard spool
- Wide compatibility with 1.75mm FDM printers
- Produces glossy, smooth, high-quality finishes
- Ideal for prototypes, models, and mass printing
CREALITY
Creality Space Pi Filament Dryer Plus
- Creality Space Pi Filament Dryer Plus
- Two Rolls Capacity
- 360° Hot-air Heating
- Real-time humidity & temperature monitoring
- Drying time setting 0-48h
- One-key set for 12 filaments
CREALITY
Creality Sonic Pad
- Creality Sonic Pad
- 3D Printing Pad Based on Klipper
- Compatible with most FDM printers
- Upgrade Printing Speed 2X~5X
- Equipped with RJ45 Ethernet port
- Control up to 4 FDM 3D Printers
- Controlling multiple 3D printers
- 2Gb RAM and 8Gb ROM
- 7" 1024*600 Pixel Multi Touch Screen
- Pre-Configured with 22 Creality Models
CREALITY
Creality Hyper Series PLA
- Creality Hyper Series PLA 1.75mm Filament
- 10x Faster Printing
- Keep Precision While Keeping Ultra-high Speed
- Strengthen Models with Enhanced Toughness
- Recommended Printing Temperature: 190 - 230 °C
- Recommended Bed Temperature: 25 - 60°C
CREALITY
Creality Filament Dry Box 2.0
- Creality Filament Dry Box 2.0
- Temperature range 45°C-65°C
- 360° hot air heating
- Real-time monitoring
- 24-hour timer
- Compatible With all of Filaments
- Secure power switch
CREALITY
Creality 3D Digital Spool Rack-S
- Accurate Filament Weighing
- Smooth Filament Feeding
- Wide Adaptability
- HD Display
- Compatible With all of FDM Printers
- Large-diameter roller design
CREALITY
Creality&BASF Ultra Series PLA
- Creality&BASF Ultra Series PLA 1.75mm Filament
- Faster cooling and shaping
- Higher accuracy
- Faster Priting Speed 600mm/s
- Recommended Printing Temperature: 200-230℃
- Recommended Bed Temperature: 25 - 60°C
ELEGOO
ELEGOO Mercury XS Bundle
- ELEGOO Mercury XS Bundle
- 360° all-round exposure
- Dual function of Curing & Washing
- Large washing volume of 7000ml
- Easy and intuitive operation
- UV Protection Cover
- Wide Compatibility
ELEGOO
ELEGOO Mercury X Bundle
- ELEGOO Mercury X Bundle
- Washing and Curing Machine
- 60 ° Three-Dimensional Curing
- Large washing volume of 7000ml
- Easy and intuitive operation
- UV Protection Cover
- Wide Compatibility
CREALITY
Creality UW-01
- Creality UW-01
- Washing & Curing Machine
- Dual Band UV Light Source
- Large Size Washing Container
- 2~90min Washing & Curing
- Touch Buttons
- Washing Container Size 190*154*200mm
CREALITY
Creality K1 Max Dual-Sided Build Plate
- Creality K1 Max Dual-Sided Printing Platform Board Kit
- Dual Use Functionality
- High Adhesion
- Quick Installation
- Cost Effective
- Easy to Demold
- Highly Flat
- Wear Resistant & Durable
CREALITY
Creality Filament Vacuum Storage Kit
- Creality Filament Vacuum Storage Kit
- vacuum storage of filament
- Strong Suction for Fast Pumping
- Food-grade Material for Recycling
- One-button Vacuuming
CREALITY
Creality K1 Max Smooth PEI Build Plate Kit
- Creality K1 Max Smooth PEI Build Plate Kit
- Smooth PEI Surface for Flat Model Surface
- High-temperatureResistant with Stable Performance
- High-strength Spring Steel
- Easy to Remove Printed Models
- Strong Magnetic Force Not Easy to Dislocate
- Thoughtful Design Finer Details
CREALITY
Creality CR-PLA
- Creality CR-PLA Filament
- Density 1.25g/cm³
- Tensile strength 49MPa
- Bending strenght 78MPa
- Extruder Temp 195-230 ℃
- Bed Temp 25 -60℃
- Printing Speed 40-80mm/s
- Print Surface Carborundum glass platform, PEI
CREALITY
Creality K1 Nozzle Kit
- Creality K1 Nozzle Kit
- Nozzle Diameters 0.4,0.6,0.8
- Premium Materials
- Smooth inner wall
- Compatible with K1 Max, K1 , Ender-3 V3 KE
CREALITY
Creality K1C Dual-Sided Printing Platform...
- Creality K1C Dual-Sided Printing Platform Board Kit
- Glossy PEO + Matte PEI printing platform board
- Dual-use functionality for versatile switching
- Highly flat
- Wear-resistant and durable
- Compatinble With K1C,Ender-3 V3,K1
ELEGOO
ELEGOO PLA Filament
- ELEGOO PLA Filament
- Density 1.20g/cm³
- Charpy impact 5.4kj/m²
- Termal Deformation Temp 53°C
- Prop Extruder Temp 190~220°C
- Prop Bed Temp 50-65°C
- Priting Speed 30-70mm/s
- Elongation at Break 11.2%
- Tensile Strength 50MPa
CREALITY
Creality K1C Smooth PEI Build Plate
- Creality K1C Smooth PEI Build Plate
- Excellent Adhesion
- High Strength and Wear Resistance
- High Flatness
- Easy Model Removal
- Dimensions 235*235mm
- Compatible With K1C,K1,Ender-3 V3
ELEGOO
ELEGOO PLA Special Colored
- ELEGOO PLA Special Colored
- Density 1.20g/cm³
- Charpy impact 5.4kj/m²
- Termal Deformation Temp 53°C
- Prop Extruder Temp 190~220°C
- Prop Bed Temp 50-65°C
- Priting Speed 30-70mm/s
- Elongation at Break 11.2%
- Tensile Strength 50MPa
ELEGOO
ELEGOO Mercury Plus V3.0
- Wash and Cure 2 in 1
- 114% Larger Capacity
- Dual Cleaning Options
- Powerful 360° All-Round Curing
- Easy to Use
- Anti-UV Cover
ELEGOO
ELEGOO Silk PLA
- ELEGOO ELEGOO Silk PLA
- Density 1.20g/cm³
- Charpy impact 5.4kj/m²
- Termal Deformation Temp 53°C
- Prop Extruder Temp 190~220°C
- Prop Bed Temp 50-65°C
- Priting Speed 30-70mm/s
- Elongation at Break 11.2%
- Tensile Strength 50MPa
English
العربية
