Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Categories:
Filamets
-
Brand:
CREALITY
-
Brand:
eSUN
-
Brand:
Polymaker
-
Material:
ABS
-
Material:
PETG
eSUN
eSUN PETG
- eSun PETG Filament
- Resistant to Variety of Chemicals
- High Precision Printing
- Density 1.27
- Heat Distortion Temp 64
- Tensin Strength 52.2 MPa
- Elogation at Break 83%
- Extruder Temp 230-250
- Bed Temp 75~950
eSUN
eSUN ABS
- eSUN ABS Filament
- Unbelievable Toughness
- Impact resistance
- Heat resistance
- Density(g/cm3) 1.04
- Heat Distortion 78℃ 0.45MPa
- Melt Flow Index(g/10min) 12(220℃/10kg）
- Tensile Strength 43MPa
- Elongation at Break 22%
- Extruder Temp 230 – 270℃
- Bed Temp 95 – 110°C
eSUN
eSUN ABS+
- eSUN ABS+ Filament
- Density 1.06g/cm³
- Heat Distortion 73
- Tensil Strength 40%
- Extruder Temp 230~270
- Bed Temp 95~110
Polymaker
Polymaker PolyLite PETG
- Polymaker PolyLite PETG
- Density 1.25 g/cm3
- Tensile strength 31.9 MPa
- Elongation at break 6.8 %
- Printing Temperature 230˚C - 240˚C
- Bed Temperature 70˚C - 80˚C
Polymaker
Polymaker PolyLite Translucent PETG
- Polymaker PolyLite Translucent PETG
- Density 1.25 g/cm3
- Tensile strength 31.9 MPa
- Elongation at break 6.8 %
- Printing Temperature 230˚C - 240˚C
- Bed Temperature 70˚C - 80˚C
CREALITY
Creality CR PETG
- Creality CR PETG Filament
- Excellent stability and moisture resistance
- Transparent and Glossy
- Mutiple colors
- Simple operation & Wide Range Compatibility
- Printing temperature: 230-250℃
- Tensile strength: 49 MPa
Polymaker
Polymaker PolyLite ABS
- Polymaker PolyLite ABS Filament
- Density 1.12 g/cm3
- Shore Hardness 72D
- Elongation at Break 2.7±0.4%
- Nozzle Temp 245-265℃
- Bed Temp 90-100℃
- Printing Speed 30-50mm/s
- Tensile strength 25.4±0.8 MPa
Polymaker
Polymaker PolyLite ASA
- Polymaker PolyLite ASA Filament
- Weather Resistance
- UV Resistance
- Density 1.13 g/cm3
- Weak Acids Resistant
- Charpy impact strength 10.3±0.4 kJ/m2
- Elongation at break 6.7±0.6%
- Nozzle Temperature 240–260℃
- Build plate temperature 75-95˚C
eSUN
eSun eABS Max
- eSun eABS Max
- High impact resistance
- High toughness
- Antiflaming
- Density 1.05 g/cm3
- Tensile Strength 45MPa
- Elongation at Break 30%
- Flexural Strength 58MPa
- Extruder Temperature 240 – 270℃
- Bed temperature 95 – 110°C
- Printing Speed 40 – 100mm/s
eSUN
eSUN ePETG+HS
- eSUN ePETG+HS Filament
- High Toughness & Waterproof
- Chemical Resistance
- Density 1.26 g/cm3
- Tensile Strength 29.2MPa
- Elongation at Break 4.2%
- Extruder Temp 220-260°C
- Bed Temp 75-90°C
- Printing Speed 40-300mm/s
English
العربية
