Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Categories:
3D Printer
-
Categories:
Resin
-
Brand:
BAMBU LAB
-
Brand:
ELEGOO
-
Brand:
Jamg HE
-
Brand:
PHROZEN
![]()
BAMBU LAB
Bambu Lab H2D AMS Combo 3D Printer
- Dual-nozzle system for multi-material & multi-color printing
- Maximum print speed up to 600mm/s
- Massive build volume: 350×320×325 mm³
- High-temperature all-metal hotend: up to 350°C
- 65°C actively heated chamber for warp-free printing
- Supports over 20 materials: PLA, ABS, PETG, TPU, PC, PA
- REAL High-Flow Hotend: up to 65mm³/s flow rate
- Intelligent DynaSense Extruder with closed-loop servo control
- Automatic multi-color and multi-filament printing
- Supports up to 16 filaments
- 15-point filament monitoring system for feeding, tip location, tension & flow
- AI and Smart Features
- AI-powered pre-flight checklist
- Built-in cameras: BirdsEye, Nozzle, Toolhead
- Auto bed leveling and Z-offset calibration
- Real-time error detection (clogs, tangles, under-extrusion)
- Power loss recovery & filament runout detection
- Compatible with optional 10W / 40W laser modules
- Compatible with digital cutting blade module
- Compatible with pen plotter tool for writing/drawing
- Quick-swap toolheads with automatic recognition
- Laser Power: 10W or 40W (455nm)
- Engraving area: up to 310×270 mm
- Engraves and cuts wood, acrylic, leather, rubber, and more
- Micro Lidar for 3D mesh generation and Z-height sensing
- Built-in air assist, flame detection, and safety systems
- Digital Cutting & Drawing
- Cutting area: 300×285 mm²
- Blade pressure: 50gf to 600gf
- Supports vinyl, paper, fabric, leather, etc.
PHROZEN
Phrozen Castable Resin W40 Orange
- Phrozen Castable Resin W40 Orange
- 40% wax content
- Low shrinkage, high precision
- No foul/strong odor
- Compatible with 405nm 3D Printers
- XY resolution：0.050 mm
BAMBU LAB
Bambu Lab H2S AMS Combo 3D Printer
- Large build volume 340×320×340 mm
- Multi-color printing with AMS 2 Pro
- Supports up to 24 colors & materials
- Optical calibration at 5μm accuracy
- All-metal nozzle with 350°C heat
- Heated chamber up to 65°C
- Automatic filament drying system
- 23 smart sensors & 3 AI cameras
- Print speed up to 1000 mm/s
- Servo motor with 67% more extrusion
- Optional 10W laser cutting module
- Active vibration compensation system
- Sturdy, integrated metal body design
- Ultra-quiet operation under 50 dB
PHROZEN
Phrozen Castable Resin W20 Green
- Phrozen Castable Resin W20 Green
- 20% wax content
- Low shrinkage, high precision
- No foul/strong odor
- Compatible with 405nm 3D Printers
- XY resolution：0.050 mm
BAMBU LAB
Bambu Lab A1 Combo
- Bambu Lab A1 Combo 3D printer
- Multi-Color Printing With AMS
- Build Volume:256*256*256 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 100℃
- built-in Monitoring camera
ELEGOO
ELEGOO Centauri Carbon 3D Printer
- ELEGOO Centauri Carbon 3D Printer
- Build Volume 256×256×256 mm
- Fully enclosed chamber
- Max Printing Speed 500 mm/s
- Support Auto-Leveling
- Layer Thickness 0.1-0.4 mm
- 4.3-inch Capacitive Touch Screen Controller
- Max Hot End Temperature 320 °C
- Max Heated Bed Temperature 110 °C
PHROZEN
Phrozen Castable Jewelry 3D Printing Resin
- Phrozen Castable Jewelry 3D Printing Resin
- Surface Hardness: 76 Shore D
- Tensile Stress at Break: 25.1 MPa
- Elongation at Break, EAB: 20.63 %
- Notched Izod Impact：28.98 J/m
- Specifically designed for casting
- Low shrinkage, high precision
- No foul/strong odor
- Compatible with 405nm 3D Printers
- XY resolution：0.050 mm
Jamg HE
JAMG HE Water Washable ABS Like Resin
- JAMG HE Water Washable ABS Like Resin
- Fast Curing
- Good Process Performance
- Low Viscosity
- Advantage of improved formulation
- Low Odour And Easy to Clean
Jamg HE
JAMG HE Gingiva Mask Resin
- JAMG HE Gingiva Mask Resin
- Available in Two Colors
- High Tensile Strength
- Low Odor & Non-Toxic
- Flexibility & Elasticity
- Compatibility with LCD & DLP 3D Printers
Jamg HE
JAMG HE Dental Castable Resin
- JAMG HE Dental Castable Resin
- High Accurate
- Ideal for make Crown or frame casting
- Ultra low shrinkage
- Ash free for casting
- Compatible Printer: DLP,LCD,SLA
ELEGOO
ELEGOO OrangeStorm Giga
- ELEGOO OrangeStorm Giga
- Build Volume 800x800x1000mm
- Printing Speed 300mm/s
- Multi-Nozzle Printing
- Portable 7-inch Controller
- Multi link Printing Plate
- Max Bed Temp 90°C
- Max Extruder Temp 300℃
Jamg HE
JAMG HE Ultra Cast Resin
- JAMG HE Ultra Cast Resin
- Easy printing
- 90% wax resin
- Extremely easy casting
- No casting skill required
ELEGOO
ELEGOO Saturn 4 Ultra 16K
- Elegoo Saturn 4 Ultra 16K
- Build Volume 211.68*118.37*220
- 10Inch Monochrome LCD 11520*5120
- XY Resolution 19*24um
- Real-Time Monitoring Ai HD Camera
- Layer Thickness 0.01-0.2mm
- Fully Automatic Leveling
- Tilt Release Technology for faster Printing
- Printing Speed up to 150mm/h
- enhance printing by Heating tank
- Wi-Fi File Transfer & Cluster Printing
Jamg HE
JAMG HE High Wax Plus Resin
- JAMG HE High Wax Plus Resin
- 60% wax resin
- Great performance
- Smooth surface
- Suitable for filigree and diamond jewelry casting
- Weight 1000g
Jamg HE
JAMG HE X Cast Resin
- JAMG HE X Cast Resin
- Sutible for jewelry or silver & gold casting
- High detail prints
- Easy cleaning
- Super casting
- Easy to set diamond or stone
- Weight 1000g
Jamg HE
JAMG HE 10K Low Shrinkage Nano Resin
- JAMG HE 10K Low Shrinkage Nano Resin
- Density 1.05-1.25 g/cm3
- Jewelry Silicone Rubber Mold Resin
- Flexural modulus 1.882-2.385Mpa
- Flexural strength 59-70MPa
- Thermal expansion 95*E-6
- Tensile modulus 1.779-2.385 MPa
ELEGOO
ELEGOO Jupiter SE 6K
- 12.8-inch 6K mono LCD
- PFA Release Film
- Light Source COB light source
- Print Speed Up to 70mm/H
- XY Resolution of 51*51um
- Build Volume of 277.848*156.264*300 mm³
- 3.5-inch Capacitive Touch Screen Controller
PHROZEN
Phrozen RPG 3D Printing Resin
- Phrozen RPG 3D Printing Resin
- More durable and playable
- Flexible and elastic
- Print once, play more
- The look that best suits your character
- Stunning matte gray finish
PHROZEN
Phrozen Aqua Hyperfine 3D Printing Resin
- Phrozen Aqua Hyperfine 3D Printing Resin
- Phrozen RPG 3D Printing Resin
- More durable and playable
- Flexible and elastic
- Print once, play more
- The look that best suits your character
- Stunning matte gray finish
PHROZEN
Phrozen Aqua 8K 3D Printing Resin
- Phrozen Aqua 8K 3D Printing Resin
- Specifically formulated to showcase super-fine detail
- Easy to print and are easily post-processed
- Low Shrinkage & High Precision
- Low Viscosity & Low Odor
PHROZEN
Phrozen Aqua 4K 3D Printing Resin
- Phrozen Aqua 4K 3D Printing Resin
- Developed for low shrinkage and high precision
- Easy to print and are easily post-processed
- Formulated to print with the highest resolution
PHROZEN
Phrozen Aqua 3D Printing Resin
- Phrozen Aqua 3D Printing Resin
- Good printing performance
- Print even thin objects with ease
- Moderate viscosity and low odor
- Density: 1.05 - 1.25 g/cm3
- Viscosity: 250 - 400 cP
- Surface Hardness: 70 Shore D
- Tensile Strength at Break: 17.6 MPa
ELEGOO
ELEGOO Mars 5 Ultra
- ELEGOO Mars 5 Ultra 3D Printer
- 7-inch 9K Mono LCD
- Printing Speed 150mm/h
- Resolution 8520x4320
- XY Resolution 18x18μm
- Smart Printing with AI Camera
- Automatic Build Plate Leveling
- Layer Thickness 0.01-0.2mm
- 9H Screen Protector
- 4.0-inch Capacitive Touch Screen Controller
- Z-AXIS Accuracy 0.02mm
- Real-Time Monitoring
English
العربية
