Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Categories:
3D Printer
-
Categories:
3D Printer Accs
-
Categories:
Laser Engravers
-
Brand:
BAMBU LAB
-
Brand:
LaserPecker
![]()
BAMBU LAB
Bambu Lab H2D AMS Combo 3D Printer
- Dual-nozzle system for multi-material & multi-color printing
- Maximum print speed up to 600mm/s
- Massive build volume: 350×320×325 mm³
- High-temperature all-metal hotend: up to 350°C
- 65°C actively heated chamber for warp-free printing
- Supports over 20 materials: PLA, ABS, PETG, TPU, PC, PA
- REAL High-Flow Hotend: up to 65mm³/s flow rate
- Intelligent DynaSense Extruder with closed-loop servo control
- Automatic multi-color and multi-filament printing
- Supports up to 16 filaments
- 15-point filament monitoring system for feeding, tip location, tension & flow
- AI and Smart Features
- AI-powered pre-flight checklist
- Built-in cameras: BirdsEye, Nozzle, Toolhead
- Auto bed leveling and Z-offset calibration
- Real-time error detection (clogs, tangles, under-extrusion)
- Power loss recovery & filament runout detection
- Compatible with optional 10W / 40W laser modules
- Compatible with digital cutting blade module
- Compatible with pen plotter tool for writing/drawing
- Quick-swap toolheads with automatic recognition
- Laser Power: 10W or 40W (455nm)
- Engraving area: up to 310×270 mm
- Engraves and cuts wood, acrylic, leather, rubber, and more
- Micro Lidar for 3D mesh generation and Z-height sensing
- Built-in air assist, flame detection, and safety systems
- Digital Cutting & Drawing
- Cutting area: 300×285 mm²
- Blade pressure: 50gf to 600gf
- Supports vinyl, paper, fabric, leather, etc.
BAMBU LAB
Bambu Lab H2S AMS Combo 3D Printer
- Large build volume 340×320×340 mm
- Multi-color printing with AMS 2 Pro
- Supports up to 24 colors & materials
- Optical calibration at 5μm accuracy
- All-metal nozzle with 350°C heat
- Heated chamber up to 65°C
- Automatic filament drying system
- 23 smart sensors & 3 AI cameras
- Print speed up to 1000 mm/s
- Servo motor with 67% more extrusion
- Optional 10W laser cutting module
- Active vibration compensation system
- Sturdy, integrated metal body design
- Ultra-quiet operation under 50 dB
BAMBU LAB
Bambu Lab A1 Combo
- Bambu Lab A1 Combo 3D printer
- Multi-Color Printing With AMS
- Build Volume:256*256*256 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 100℃
- built-in Monitoring camera
LaserPecker
LaserPecker LX2 The All-in-One Laser Cutter
- Ultra-fast cutting speed up to 1000mm/s
- Acceleration reaching 10,000mm/s²
- Interchangeable 20W, 40W & 60W diode lasers
- 2W IR laser for precise metal engraving
- Point-to-Shape™ & 12MP camera positioning
- 3D auto-focus for curved surface engraving
- Large working area: 500 × 305mm
- Cuts up to 22mm wood & 20mm acrylic
- Engraves metals, glass, leather & more
- Compact size with dual-access design
- Rotary engraving up to 130mm diameter
- Full safety with Class 1 laser certification
- Supports LightBurn & LaserPecker software
- USB & Wi-Fi connectivity for easy operation
LaserPecker
LaserPecker LP4 Laser Engraver
- Dual-laser system for all material types
- 10W blue + 2W infrared laser combo
- Engraves and cuts wood, acrylic, metal
- Expandable work area up to 300mm wide
- Rotary extension for cylindrical objects
- Smart touchscreen with live preview
- Up to 8K resolution engraving detail
- Smart focal correction for edge precision
- Portable and lightweight at only 4kg
- Compatible with app and LightBurn software
LaserPecker
LaserPecker LP3 Basic Laser Engraver
- LaserPecker LP3 Basic Laser Engraver
- 1064nm IR laser for metal and plastic engraving
- 4K resolution for ultra-realistic detail
- 0.03mm laser spot for fine precision
- Engraves 100+ materials effortlessly
- Wireless Bluetooth and USB connectivity
- Max speed up to 800mm per second
- Real-time preview and smart focusing
- Multi-angle and cylinder engraving support
- Batch engraving with positioning baseplate
- Mobile app and PC software compatible
BAMBU LAB
Bambu Temperature Plate Smooth PEI
- Bambu Temperature Plate Smooth PEI
- Surface temperature resistance Up to 120℃
- Spring steel thickness 0.4 mm
- Usable print size 256*256 mm
- Excellent adhesion
- Works well with the Automatic Calibration
- Can be replaced by the user
BAMBU LAB
Bambu Lab 3D Effect Sheets Combo
- Include 4 Different Sheets
- Easy Installation
- Galaxy,Carbon Fiber,Starry Diamond Surface Sheet
- Compatible With X1,P1 & A1 mini
BAMBU LAB
Bambu Lab AMS
- Bambu Lab Automatic Material System
- Support for Multiple Colors/Materials
- Ensure Filament Stays Dry
- Detect Filament Runout & Winding Issues
- AMS Filament Backup System
BAMBU LAB
Bambu Dual-Texture PEI Plate
- Bambu PEI Plate with Dual Textures
- Automatically Releases as it Cools
- Superior First-Layer Adhesion
- Features Both Smooth and Matte Finishes
- Delivers High Precision in Z-axis Printing
BAMBU LAB
Bambu Lab P1P Enclosure Kit
- Bambu Lab P1P Enclosure Kit
- Enhanced Heat Dissipation
- Reliable Motion Performance
- Improve Printing Quality
- Print a wide range of filaments
BAMBU LAB
Bambu Lab X1-Carbon Combo
- Bambu Lab X1 Carbon COMBO 3D printer
- Equipped with the AMS System
- Build Volume:256×256×256mm
- High quality printing with 7 μm Lidar Resolution
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab A1 mini
- Bambu Lab A1 mini 3D printer
- Build Volume:180*180*180 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 80℃
- built-in Monitoring camera
BAMBU LAB
Bambu Lab P1P
- Bambu Lab P1P 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab P1S Combo
- Bambu Lab P1S 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- Enclosed-body for high-temperature filament printing
- Up to 16-color printing with AMS
- built-in chamber camera
BAMBU LAB
Bambu Lab P1S
- Bambu Lab P1S 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab AMS 2 Pro
- Airtight humidity-proof storage
- Active filament drying to 65°C
- Supports up to 24-color printing
- Precision brushless servo motor
- Active internal moisture discharge
- Real-time humidity monitoring
- Compatible with X1/P1/A1/H2
- Status via Studio & Handy app
- Highly stable filament feeding
- Supports engineering materials
- Durable ABS/PC body structure
- Ideal for extended print cycles
LaserPecker
Laserpecker LP2 Basic Bundle
- Laserpecker LP2 Basic Bundle Laser Engraver
- Lightweight, handheld (only 1kg) design
- 2K resolution with 0.05mm precision
- Engraves 100+ types of materials
- 600mm/s high-speed engraving
- Bevel engraving for angled surfaces
- Trolley mode: engrave up to 2000mm length
- Rotary engraving on cylindrical items
- Dual optical lens for accurate focus
- Easy app control for beginners
- Works with Android, iOS, PC, and Mac
LaserPecker
Laserpecker LP1 Pro Basic
- Foldable design, fits in a backpack
- Engraves on various soft materials
- Mobile app with real-time preview
- Auto-focusing electric support stand
- Works with power banks & USB-C
- Compact size with only 600g weight
- Long 10,000+ hour lifespan
- Engraving resolution up to 2K
- Budget-friendly & easy to operate
- Expandable with accessory options
BAMBU LAB
Bambu Lab X1-Carbon
- Bambu Lab X1 Carbon 3D printer
- Build Volume:256×256×256mm
- High quality printing with 7 μm Lidar Resolution
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab X1E
- Bambu Lab X1E 3D printer
- Build Volume:256×256×256mm
- High quality printing with 7 μm Lidar Resolution
- Max Speed : 500mm/s
- Max Hot End Temperature : 320 ℃
- Chamber Control Temperature 60℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab A1 mini Combo
- Bambu Lab A1 mini Combo 3D printer
- Equipped with AMS system
- Build Volume:180*180*180 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 80℃
- built-in Monitoring camera
BAMBU LAB
Bambu Lab H2D 3D Printer
- Bambu Lab H2D 3D Printer
- Dual-nozzle printing
- 350×320×325 mm³ print volume
- 350°C nozzle & 65°C chamber heat
- Optional 10W/40W laser module
- Digital cutter and pen support
- 600 mm/s high-speed printing
- AI-powered nozzle and top cameras
- 5μm optical motion calibration
- Servo-controlled DynaSense extruder
- Auto pre-flight check and alignment
English
العربية
