Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Categories:
3D Printer
-
Categories:
Filamets
-
Categories:
Resin
-
Brand:
ANYCUBIC
-
Brand:
BAMBU LAB
-
Brand:
CREALITY
![]()
BAMBU LAB
Bambu Lab H2D AMS Combo 3D Printer
- Dual-nozzle system for multi-material & multi-color printing
- Maximum print speed up to 600mm/s
- Massive build volume: 350×320×325 mm³
- High-temperature all-metal hotend: up to 350°C
- 65°C actively heated chamber for warp-free printing
- Supports over 20 materials: PLA, ABS, PETG, TPU, PC, PA
- REAL High-Flow Hotend: up to 65mm³/s flow rate
- Intelligent DynaSense Extruder with closed-loop servo control
- Automatic multi-color and multi-filament printing
- Supports up to 16 filaments
- 15-point filament monitoring system for feeding, tip location, tension & flow
- AI and Smart Features
- AI-powered pre-flight checklist
- Built-in cameras: BirdsEye, Nozzle, Toolhead
- Auto bed leveling and Z-offset calibration
- Real-time error detection (clogs, tangles, under-extrusion)
- Power loss recovery & filament runout detection
- Compatible with optional 10W / 40W laser modules
- Compatible with digital cutting blade module
- Compatible with pen plotter tool for writing/drawing
- Quick-swap toolheads with automatic recognition
- Laser Power: 10W or 40W (455nm)
- Engraving area: up to 310×270 mm
- Engraves and cuts wood, acrylic, leather, rubber, and more
- Micro Lidar for 3D mesh generation and Z-height sensing
- Built-in air assist, flame detection, and safety systems
- Digital Cutting & Drawing
- Cutting area: 300×285 mm²
- Blade pressure: 50gf to 600gf
- Supports vinyl, paper, fabric, leather, etc.
BAMBU LAB
Bambu Lab H2S AMS Combo 3D Printer
- Large build volume 340×320×340 mm
- Multi-color printing with AMS 2 Pro
- Supports up to 24 colors & materials
- Optical calibration at 5μm accuracy
- All-metal nozzle with 350°C heat
- Heated chamber up to 65°C
- Automatic filament drying system
- 23 smart sensors & 3 AI cameras
- Print speed up to 1000 mm/s
- Servo motor with 67% more extrusion
- Optional 10W laser cutting module
- Active vibration compensation system
- Sturdy, integrated metal body design
- Ultra-quiet operation under 50 dB
ANYCUBIC
Anycubic Water-Wash Resin+
- Water Washable & Slight Odor
- Low Viscosity for Fast Printing
- High Precision with Low Shrinkage
- Density 1.2 g/cm3
- Viscosity 150~250 mPa
- Hardness 80Shore D
- Tensile Strength 30-45MPa
BAMBU LAB
Bambu Lab A1 Combo
- Bambu Lab A1 Combo 3D printer
- Multi-Color Printing With AMS
- Build Volume:256*256*256 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 100℃
- built-in Monitoring camera
ANYCUBIC
Anycubic ABS-Like Resin V2
- Anycubic ABS-Like Resin V2
- Water-Washable
- Excellent Toughness
- Durability and Well-Performance
- High Precision Minimal Shrinkage
CREALITY
Creality Hi Combo
- Creality Hi Combo 3D Printer
- Support Multicolor 3D Printing
- Build Volume 260×260×300mm
- Printing Speed up to 500mm/s
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
- Full-auto leveling
- 3.2" color touch screen
- Built-in Sensor to Read Filament Info
- All-metal Body
- Monitoring Camera with a Privacy Cap
ANYCUBIC
Anycubic Standard Resin V2
- Anycubic Standard Resin V2
- Superior Strength and Durability
- Elongation at break 25-30%
- Density 1.05-1.25g/cm³
- Viscosity 250-350 cP·mPa·s
- Hardness 80-83D
- Flexural modulus 1500-2100 MPa
- Resin wash Alcohol
- Exceptional Precision with Minimal Distortion
- High Impact Resistance and Broad Compatibility
ANYCUBIC
Anycubic Tough Resin 2.0
- Anycubic Tough Resin 2.0
- Density 1.10-1.15g/cm³
- Elongation at break 30-50%
- Hardness 76 Shore D
- Viscosity 150-250MPa·s（25℃）
- Heat deflection temp>60-65℃
- Exceptional Toughness & Resistant to Breakage
- Strong Elongation & High Flexibility
- High Precision, Minimal Shrinkage
ANYCUBIC
Anycubic Photon Mono M7 Pro
- Anycubic Photon Mono M7 Pro
- Max Printing Speed 170mm/h
- 10.1'', 14K Mono LCD
- Resolution 13320 * 5120
- 5" IPS Touch Controller
- Auto Resin Refill, Withdrawal
- Auto-Adaptive Technology Control Heating
- Intelligent Workflow-Assist Printing
- Dynamic Temperature Control Resin VAT
CREALITY
Creality K2 Plus Combo
- Creality K2 Plus Combo 3D Printer
- Multi Filament 3D Printing With CFS
- Apus Direct Drive Extruder
- Build Volume 350x350x350mm
- Printing Speed Up to 600mm/s
- Max Nozzle Temp 350°C
- Max Bed Temp 120°C
- Ai Pritning Control System
- Fully Automatic Leveling
- Actively heated chamber
- Conectivity RJ45 ethernet, Wifi
ANYCUBIC
Anycubic Tough Resin Ultra
- Anycubic Tough Resin Ultra
- Density 1.05-1.25g/cm³
- Elongation at break 70-80%
- Flexural strength 15-25 MPa
- Hardness 71-75D
- Strong lmpact Resistance
- Flexible with Excellent Rebound
CREALITY
Creality K2 PRO Combo 3D Printer
- 300×300×300 mm large build volume
- CFS for up to 4-color multi-material printing
- Expandable to 16 colors with 4 CFS units
- Equipped with a heated print chamber
- 32GB EMMC File Storage
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
CREALITY
Creality K2 Combo 3D Printer
- 260×260×260 mm large build volume
- CFS for up to 4-color multi-material printing
- Expandable to 16 colors with 4 CFS units
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
ANYCUBIC
Anycubic High Clear Resin
- Anycubic High Clear Resin
- Density 1.05-1.25g/cm³
- Elongation at break 14.6%
- Hardness 78D
- Tensile strength 28.1 MPa
- Molding shrinkage 3.72-4.24%
- Prevents Yellowing
- Durable and Robust
- Mild Scent and Safe
CREALITY
Creality Ender-5 Max
- Creality Ender-5 Max 3D Printer
- Enormous 400×400×400mm Build volume
- Ultra Fast Printing 700 mm/s
- die-cast aluminum alloy frame
- 36-point auto leveling
- Printing Accuracy 100±0.1 mm
- Layer Height 0.05-0.3 mm
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
CREALITY
Creality Hyper Series PLA
- Creality Hyper Series PLA 1.75mm Filament
- 10x Faster Printing
- Keep Precision While Keeping Ultra-high Speed
- Strengthen Models with Enhanced Toughness
- Recommended Printing Temperature: 190 - 230 °C
- Recommended Bed Temperature: 25 - 60°C
CREALITY
Creality Hi 3D Printer
- Creality Hi 3D Printer
- Build Volume 260×260×300mm
- Printing Speed up to 500mm/s
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
- Full-auto leveling
- 3.2" color touch screen
- Built-in Sensor to Read Filament Info
- All-metal Body
- Monitoring Camera with a Privacy Cap
CREALITY
Creality&BASF Ultra Series PLA
- Creality&BASF Ultra Series PLA 1.75mm Filament
- Faster cooling and shaping
- Higher accuracy
- Faster Priting Speed 600mm/s
- Recommended Printing Temperature: 200-230℃
- Recommended Bed Temperature: 25 - 60°C
ANYCUBIC
Anycubic Kobra S1 Combo
- Anycubic Kobra S1 Combo
- Print Volume 250*250*250mm
- Printing Speed up to 600mm/s
- 8 Color 3D Printing
- Ultra-Quiet Printing 33dB
- Compatible with PLA, PETG, TPU，ABS, ASA
- Nozzle temperature 320°C
- Hotbed temperature 120℃
ANYCUBIC
Anycubic PLA Basic
- Anycubic PLA Basic 3D Printer Filament
- Neat Spool and No Tangle
- High Precision and Accuracy
- Eco-Friendly, Biodegradable
ANYCUBIC
Anycubic Photon Mono M7 Max
- Anycubic Photon Mono M7 Max
- Resin Auto-Fill Unit
- Build Volume 298x164x300mm
- 13.6 inch monochrome 7K screen
- X/Y Axis Resolution 46*46μm
- LighTurbo 3.0 High-Precision Light Source System
- Maximum print speed op to 86mm/h
- Dynamic temperature control resin vat
- Intelligence Assisted Printing System
- Light Source COB light source+ Fresnel lens
- Light Intensity 4500±10%μW/cm²
ANYCUBIC
Anycubic PLA High Speed
- Anycubic PLA High Speed
- Priting Up to 500mm/s
- Enhanced Fluidity and Better Cooling Effect
ANYCUBIC
Anycubic PLA Silk
- Anycubic PLA Silk Filament
- Silk Feel and Lustre
- Eco-Friendly, Biodegradable
- Widely Applicable to Printers
English
العربية
