Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Categories:
3D Printer
-
Categories:
3D Scanner
-
Categories:
Filamets
CREALITY
Creality Hyper PLA RFID 3D Printing Filament
- 10× faster printing, up to 600 mm/s speed
- High-fluidity formula for smooth extrusion
- Rapid cooling for precise high-speed shaping
- Higher tensile strength than ABS
- Tougher and stronger than standard PLA
- Consistent diameter 1.75 mm ±0.03 mm
- Two-way laser diameter measurement
- Neatly spooled to prevent tangling
- Stable extrusion for long print jobs
- Smart RFID for auto filament recognition
- Optimized for Creality high-speed printers
- Premium raw materials with strict QC
SHINING 3D
Shining3D EINSTAR Rockit
- Scan Speed: 2,800,000 points/s
- Accuracy up to 0.05 mm
- Frame Rate: 90 fps
- Marker-Free Laser Scanning
- True Wireless with Wi-Fi & USB-C
- Battery runtime up to 3 hours
- Works in light up to 110,000 Lux
- RGB 5MP Color Camera
- Supports STL, OBJ, PLY, 3MF, ASC
- Compact design: 425 g, 130×37×61 mm
![]()
BAMBU LAB
Bambu Lab H2D AMS Combo 3D Printer
- Dual-nozzle system for multi-material & multi-color printing
- Maximum print speed up to 600mm/s
- Massive build volume: 350×320×325 mm³
- High-temperature all-metal hotend: up to 350°C
- 65°C actively heated chamber for warp-free printing
- Supports over 20 materials: PLA, ABS, PETG, TPU, PC, PA
- REAL High-Flow Hotend: up to 65mm³/s flow rate
- Intelligent DynaSense Extruder with closed-loop servo control
- Automatic multi-color and multi-filament printing
- Supports up to 16 filaments
- 15-point filament monitoring system for feeding, tip location, tension & flow
- AI and Smart Features
- AI-powered pre-flight checklist
- Built-in cameras: BirdsEye, Nozzle, Toolhead
- Auto bed leveling and Z-offset calibration
- Real-time error detection (clogs, tangles, under-extrusion)
- Power loss recovery & filament runout detection
- Compatible with optional 10W / 40W laser modules
- Compatible with digital cutting blade module
- Compatible with pen plotter tool for writing/drawing
- Quick-swap toolheads with automatic recognition
- Laser Power: 10W or 40W (455nm)
- Engraving area: up to 310×270 mm
- Engraves and cuts wood, acrylic, leather, rubber, and more
- Micro Lidar for 3D mesh generation and Z-height sensing
- Built-in air assist, flame detection, and safety systems
- Digital Cutting & Drawing
- Cutting area: 300×285 mm²
- Blade pressure: 50gf to 600gf
- Supports vinyl, paper, fabric, leather, etc.
SHINING 3D
Shining3D EINSTAR 2
- Scan speed up to 2,500,000 points/s
- Accuracy up to 0.05 mm
- Max FOV 1170 × 1385 mm
- Lightweight body, only 420 g
- True wireless with 3h battery
- Hybrid light: Blue Laser + IR VCSEL
- No spray required for dark objects
- Works outdoors up to 110,000 Lux
- Full-body scan in just 60 seconds
- Built-in RGB camera for vivid color
BAMBU LAB
Bambu Lab H2S AMS Combo 3D Printer
- Large build volume 340×320×340 mm
- Multi-color printing with AMS 2 Pro
- Supports up to 24 colors & materials
- Optical calibration at 5μm accuracy
- All-metal nozzle with 350°C heat
- Heated chamber up to 65°C
- Automatic filament drying system
- 23 smart sensors & 3 AI cameras
- Print speed up to 1000 mm/s
- Servo motor with 67% more extrusion
- Optional 10W laser cutting module
- Active vibration compensation system
- Sturdy, integrated metal body design
- Ultra-quiet operation under 50 dB
ELEGOO
ELEGOO RAPID PLA Plus Filament
- Ultra-fast printing speed up to 600mm/s
- Enhanced toughness and high tensile strength
- Strong layer adhesion for smooth surfaces
- ±0.02mm high dimensional accuracy
- Tangle-free spools for uninterrupted printing
- Vacuum-sealed to prevent moisture and bubbles
- Eco-friendly biodegradable cardboard spool
- Wide compatibility with 1.75mm FDM printers
- Produces glossy, smooth, high-quality finishes
- Ideal for prototypes, models, and mass printing
SHINING 3D
Shining 3D Einscan HX2
- Shining 3D Einscan HX2 3D Scanner
- Scan Accuracy Up to 0.04mm
- Volumetric Accuracy 0.04+0.06mm/m
- Scan Speed 1,200,000 points/s
- Working Distance 470mm
- Depth of Field 200mm-700mm
- Max FOV 420mm*440mm
- Light Source 13 Blue Laser Crosses + Blue LED
BAMBU LAB
Bambu Lab A1 Combo
- Bambu Lab A1 Combo 3D printer
- Multi-Color Printing With AMS
- Build Volume:256*256*256 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 100℃
- built-in Monitoring camera
eSUN
eSun PLA+
- eSun PLA+ 1.75mm Filament
- Enhanced durability and resilience
- Versatile printer compatibility
- Superb layer bonding for optimal prints
- Recommended Printing Temperature: 210 - 230 °C
- Recommended Bed Temperature: 45 - 60°C
- Density 1.23 g/cm3
- Tensile Strength 60MPa
- Elongation at Break 60%
ELEGOO
ELEGOO Centauri Carbon 3D Printer
- ELEGOO Centauri Carbon 3D Printer
- Build Volume 256×256×256 mm
- Fully enclosed chamber
- Max Printing Speed 500 mm/s
- Support Auto-Leveling
- Layer Thickness 0.1-0.4 mm
- 4.3-inch Capacitive Touch Screen Controller
- Max Hot End Temperature 320 °C
- Max Heated Bed Temperature 110 °C
SHINING 3D
Shining 3D Einscan H2
- Shining 3D Einscan H2 3D Scanner
- Light Source : White Light + IR
- Scan Accuracy Up to 0.05mm
- Scan Speed 1,200,000points/s
- Volumetric Accuracy 0.05±0.1mm/m
- Frame rate 55FPS
- Depth of Field 200-1500mm
- Maximum FOV 780mm*900mm
- Point distance 0.2mm-3mm
CREALITY
Creality Hyper Series PLA
- Creality Hyper Series PLA 1.75mm Filament
- 10x Faster Printing
- Keep Precision While Keeping Ultra-high Speed
- Strengthen Models with Enhanced Toughness
- Recommended Printing Temperature: 190 - 230 °C
- Recommended Bed Temperature: 25 - 60°C
SHINING 3D
Shining 3D Einscan Rigil
- Tri-Mode Laser with Hybrid Light Source
- Wireless Operation with Built-in Computing
- 0.04 + 0.06 mm/m Volumetric Accuracy
- Marker-Free Blue Laser Scanning
- 5MP Full Color Texture Camera
- Works Efficiently in Sunlight Outdoors
- Three Flexible Operation Modes
- Dual Camera System for Laser and IR
- High-Speed Scanning up to 4.4M pts/s
- 6.4" AMOLED Touchscreen with Casting
CREALITY
Creality Hi Combo
- Creality Hi Combo 3D Printer
- Support Multicolor 3D Printing
- Build Volume 260×260×300mm
- Printing Speed up to 500mm/s
- Max Nozzle Temperature ≤ 300 ℃
- Max Heatbed Temperature ≤ 100 ℃
- Full-auto leveling
- 3.2" color touch screen
- Built-in Sensor to Read Filament Info
- All-metal Body
- Monitoring Camera with a Privacy Cap
eSUN
eSun ePLA-Silk Magic
- eSun ePLA-Silk Magic
- Different Colors at Different Angles
- Extruder Temp 210-230°C
- Bed Temp 45-60°C
- Density 1.256cm3
- Tensil Strength 57.64
- Durability 40%
- Printability 90%
SHINING 3D
Shining 3D EinScan Libre
- Shining 3D Einscan Liber 3D Scanner
- 101 parallel blue laser line accelerates scanning
- speed for high resolution
- 101 blue laser lines, marker free
- Fast scan speed up to 4,500,000 points/s
- High resolution to 0.05mm
- Working distance from 200~500mm
- Color texture capturing
ANYCUBIC
Anycubic Photon Mono M7 Pro
- Anycubic Photon Mono M7 Pro
- Max Printing Speed 170mm/h
- 10.1'', 14K Mono LCD
- Resolution 13320 * 5120
- 5" IPS Touch Controller
- Auto Resin Refill, Withdrawal
- Auto-Adaptive Technology Control Heating
- Intelligent Workflow-Assist Printing
- Dynamic Temperature Control Resin VAT
CREALITY
Creality&BASF Ultra Series PLA
- Creality&BASF Ultra Series PLA 1.75mm Filament
- Faster cooling and shaping
- Higher accuracy
- Faster Priting Speed 600mm/s
- Recommended Printing Temperature: 200-230℃
- Recommended Bed Temperature: 25 - 60°C
Revopoint
Revopoint MetroX 3D Scanner
- Revopoint MetroX 3D Scanner
- Metrology Grade Accuracy up to 0.01 mm
- Scanning Speed Up to 7,000,000 Points/s
- 14 Blue Laser Cross lines Light Source
- 62 lines of blue light fast point cloud creation
- Compatible With Automated Turntable Scan
- 6-AXIS 3D Scanning Stabilizer
- Output formats PLY, OBJ, STL, ASC, 3MF, GLTF, FBX
CREALITY
Creality K2 Plus Combo
- Creality K2 Plus Combo 3D Printer
- Multi Filament 3D Printing With CFS
- Apus Direct Drive Extruder
- Build Volume 350x350x350mm
- Printing Speed Up to 600mm/s
- Max Nozzle Temp 350°C
- Max Bed Temp 120°C
- Ai Pritning Control System
- Fully Automatic Leveling
- Actively heated chamber
- Conectivity RJ45 ethernet, Wifi
CREALITY
Creality K2 PRO Combo 3D Printer
- 300×300×300 mm large build volume
- CFS for up to 4-color multi-material printing
- Expandable to 16 colors with 4 CFS units
- Equipped with a heated print chamber
- 32GB EMMC File Storage
- Max nozzle temp 300°C for advanced filaments
- Hardened steel nozzle, 40 mm³/s flow rate
- Speeds up to 600 mm/s, 20,000 mm/s² accel
- Intelligent auto bed leveling system
- Dual AI cameras for live monitoring
- Steel linear rail for smooth, durable motion
- 4-inch color touchscreen for easy control
ANYCUBIC
Anycubic PLA Basic
- Anycubic PLA Basic 3D Printer Filament
- Neat Spool and No Tangle
- High Precision and Accuracy
- Eco-Friendly, Biodegradable
CREALITY
Creality CR-Scan Raptor
- Creality CR-Scan Raptor 3D Scanner
- 7 Blue Parallel Laser Lines
- Accuracy, up to 0.02mm
- Scanning Speed up to 60fps
- Objects between 5-2000mm
- 24-Bit Full-Color Scanning
- Anti-shaking for Smooth Scanning
- Unique Face & Body Algorithm
- Scan Black/Metal Objects without Sprays
- Peaceful Scanning in Various Environments
English
العربية
