Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Categories:
3D Printer
-
Categories:
Filamets
-
Brand:
ELEGOO
-
Brand:
eSUN
ELEGOO
ELEGOO Centauri Carbon 2
- 4-Color Printing Module for multi-color models
- RFID auto filament detection and syncing
- Upgraded chamber camera with Wi-Fi monitoring
- CoreXY motion system with 500 mm/s speed
- 20,000 mm/s² high-acceleration printing
- 256×256×256 mm build volume capacity
- Hardened brass-steel nozzle for CF materials
- 320°C nozzle for engineering filaments
- 110°C heated bed for strong first layers
- Supports CF, GF, ABS, PC, PA, ASA, PETG
- Triple Z-screws with linear guide rods
- 121-point auto leveling precision
- Dual-sided PEI flexible build plate
- Silent Drive motors for low noise
- Full-Auto Calibration for easy setup
eSUN
eSun eTPU-95A
- eSun eTPU-95A Filament
- Flexible and soft
- Sturdy and durable
- Compatible with all of 3D Printers
- Extruder Temp 220-250℃
- Bed Temp 40-60℃
- Printing Speed 50mm/s
- Duribility 90%
ELEGOO
ELEGOO PLA-CF Carbon Fiber
- Carbon fiber reinforced for high strength
- Lightweight with excellent rigidity
- Superior strength-to-weight ratio
- Minimal shrinkage and warping
- High dimensional accuracy
- Smooth matte textured finish
- Reduced visible layer lines
- Easy printing like standard PLA
- Compatible with most FDM printers
- Stable and consistent extrusion
- Ideal for functional prototypes
- Strong bending modulus performance
- Precision fit for assemblies
- 1kg spool with tight winding quality
ELEGOO
ELEGOO Rapid PETG
- High-speed printing up to 600 mm/s
- ±0.02 mm precise dimensional accuracy
- Strong impact and tensile strength
- Water and weather resistant material
- Low warping and smooth extrusion
- No clogging and bubble-free printing
- Eco-friendly cardboard spool
- Vacuum sealed with desiccant
- Excellent layer adhesion
- Wide FDM printer compatibility
- Heat formable for post-processing
- Optimized for rapid production
- Durable for outdoor applications
- Balanced PLA ease with ABS strength
ELEGOO
ELEGOO RAPID PLA Plus Filament
- Ultra-fast printing speed up to 600mm/s
- Enhanced toughness and high tensile strength
- Strong layer adhesion for smooth surfaces
- ±0.02mm high dimensional accuracy
- Tangle-free spools for uninterrupted printing
- Vacuum-sealed to prevent moisture and bubbles
- Eco-friendly biodegradable cardboard spool
- Wide compatibility with 1.75mm FDM printers
- Produces glossy, smooth, high-quality finishes
- Ideal for prototypes, models, and mass printing
eSUN
eSun PLA+
- eSun PLA+ 1.75mm Filament
- Enhanced durability and resilience
- Versatile printer compatibility
- Superb layer bonding for optimal prints
- Recommended Printing Temperature: 210 - 230 °C
- Recommended Bed Temperature: 45 - 60°C
- Density 1.23 g/cm3
- Tensile Strength 60MPa
- Elongation at Break 60%
eSUN
eSun ePLA-Silk Magic
- eSun ePLA-Silk Magic
- Different Colors at Different Angles
- Extruder Temp 210-230°C
- Bed Temp 45-60°C
- Density 1.256cm3
- Tensil Strength 57.64
- Durability 40%
- Printability 90%
eSUN
eSUN PETG
- eSun PETG Filament
- Resistant to Variety of Chemicals
- High Precision Printing
- Density 1.27
- Heat Distortion Temp 64
- Tensin Strength 52.2 MPa
- Elogation at Break 83%
- Extruder Temp 230-250
- Bed Temp 75~950
eSUN
eSUN ABS
- eSUN ABS Filament
- Unbelievable Toughness
- Impact resistance
- Heat resistance
- Density(g/cm3) 1.04
- Heat Distortion 78℃ 0.45MPa
- Melt Flow Index(g/10min) 12(220℃/10kg）
- Tensile Strength 43MPa
- Elongation at Break 22%
- Extruder Temp 230 – 270℃
- Bed Temp 95 – 110°C
eSUN
eSun eTPU-HS
- eSun eTPU-HS Filament
- Flexible and soft
- High elasticity
- High toughness
- Nozzle Temp 220~250°C
- Bed Temp 45~60°C
- Durability 90%
- Printing Speed 50 – 200mm/s
- Build Surface : Masking paper, PVP solid glue, PEI
eSUN
eSUN ePLA-HS
- eSun ePLA-HS Filament
- Suitable for high-speed printing
- Smooth flow without blocking
- Quick Cooling and forming
- Density 1.24 g/cm3
- Extruder Temp 210-230
- Bed Temp 45-60
- Printing Speed 350mm/s
ELEGOO
ELEGOO OrangeStorm Giga
- ELEGOO OrangeStorm Giga
- Build Volume 800x800x1000mm
- Printing Speed 300mm/s
- Multi-Nozzle Printing
- Portable 7-inch Controller
- Multi link Printing Plate
- Max Bed Temp 90°C
- Max Extruder Temp 300℃
eSUN
eSUN ABS+
- eSUN ABS+ Filament
- Density 1.06g/cm³
- Heat Distortion 73
- Tensil Strength 40%
- Extruder Temp 230~270
- Bed Temp 95~110
ELEGOO
ELEGOO Centauri Carbon 3D Printer
- ELEGOO Centauri Carbon 3D Printer
- Build Volume 256×256×256 mm
- Fully enclosed chamber
- Max Printing Speed 500 mm/s
- Support Auto-Leveling
- Layer Thickness 0.1-0.4 mm
- 4.3-inch Capacitive Touch Screen Controller
- Max Hot End Temperature 320 °C
- Max Heated Bed Temperature 110 °C
eSUN
eSun ePLA-Matte
- eSun ePLA-Matte Filament
- Matte surface effect
- High-speed printing
- Easy to peel off the support
- Excellent printability
- Prop Bed Temp 45~60
- Prop Extruder Temp 190~230
- Density 1.329 g/cm³
- Elongation at break 50%
eSUN
eSun ePLA-Metal
- eSun ePLA-Metal Filament
- Metallic glossy texture
- Excellent printability
- Smooth surface
- Prop Nozzle Temp 190 – 230℃
- Prop Bed Temp 45 – 60°C
- Density 1.255 g/cm3
- Heat Distortion Temp 53℃
- Tensile Strength 63.16 MPa
eSUN
eSun ePLA-Silk Mystic
- eSun ePLA-Silk Mystic
- Mystery Three-color
- Silk glossy texture
- Excellent printability
- Prop Extruder Temp 190 – 230℃
- Prop Bed Temp 45 – 60°C
- Tensile Strength 57.64 MPa
- Density 1.256 g/cm3
- Flexural Strength Mpa
ELEGOO
ELEGOO PLA Filament
- ELEGOO PLA Filament
- Density 1.20g/cm³
- Charpy impact 5.4kj/m²
- Termal Deformation Temp 53°C
- Prop Extruder Temp 190~220°C
- Prop Bed Temp 50-65°C
- Priting Speed 30-70mm/s
- Elongation at Break 11.2%
- Tensile Strength 50MPa
ELEGOO
ELEGOO PLA Special Colored
- ELEGOO PLA Special Colored
- Density 1.20g/cm³
- Charpy impact 5.4kj/m²
- Termal Deformation Temp 53°C
- Prop Extruder Temp 190~220°C
- Prop Bed Temp 50-65°C
- Priting Speed 30-70mm/s
- Elongation at Break 11.2%
- Tensile Strength 50MPa
ELEGOO
ELEGOO Silk PLA
- ELEGOO ELEGOO Silk PLA
- Density 1.20g/cm³
- Charpy impact 5.4kj/m²
- Termal Deformation Temp 53°C
- Prop Extruder Temp 190~220°C
- Prop Bed Temp 50-65°C
- Priting Speed 30-70mm/s
- Elongation at Break 11.2%
- Tensile Strength 50MPa
ELEGOO
ELEGOO Saturn 4 Ultra 16K
- Elegoo Saturn 4 Ultra 16K
- Build Volume 211.68*118.37*220
- 10Inch Monochrome LCD 11520*5120
- XY Resolution 19*24um
- Real-Time Monitoring Ai HD Camera
- Layer Thickness 0.01-0.2mm
- Fully Automatic Leveling
- Tilt Release Technology for faster Printing
- Printing Speed up to 150mm/h
- enhance printing by Heating tank
- Wi-Fi File Transfer & Cluster Printing
ELEGOO
ELEGOO Jupiter SE 6K
- 12.8-inch 6K mono LCD
- PFA Release Film
- Light Source COB light source
- Print Speed Up to 70mm/H
- XY Resolution of 51*51um
- Build Volume of 277.848*156.264*300 mm³
- 3.5-inch Capacitive Touch Screen Controller
ELEGOO
ELEGOO JUPITER 2 16K
- Large build volume: 302.4 × 161.98 × 300 mm
- 14-inch 16K LCD with 20×26μm XY resolution
- New dual-door design for better accessibility
- Multi-point auto-leveling system for precision
- Quick LCD replacement in just 10 minutes
- Release film replacement in only 10 seconds
- Smart resin feeding and recycling system (2kg tank)
- Heated resin vat for stable printing temperature
- Built-in camera with adaptive lighting and alerts
- Compatible with Elegoo SatelLite slicer software
ELEGOO
ELEGOO Mars 5 Ultra
- ELEGOO Mars 5 Ultra 3D Printer
- 7-inch 9K Mono LCD
- Printing Speed 150mm/h
- Resolution 8520x4320
- XY Resolution 18x18μm
- Smart Printing with AI Camera
- Automatic Build Plate Leveling
- Layer Thickness 0.01-0.2mm
- 9H Screen Protector
- 4.0-inch Capacitive Touch Screen Controller
- Z-AXIS Accuracy 0.02mm
- Real-Time Monitoring
ELEGOO
ELEGOO Saturn 4 Ultra
- ELEGOO Saturn 4 Ultra Resin 3D Printer
- 10" Mono LCD 12K
- Resolution 11520*5120
- XY Resolution 19*24um
- Build Volume 218.88*122.88*220mm
- Layer Thickness 0.01-0.2mm
- Printing Speed 150mm/H
- Printing Technology : MSLA Stereo lithography
- Light Source COB + Fresnel Collimating Lens
- PFA release film
- 4-inch capacitive touch screen Controller
- Real-Time AI Monitoring And Time
- Automatic Build Plate Leveling
eSUN
eSun ePLA-Silk
- eSun ePLA-Silk Filament
- Shinny and Silk luster texture
- Super smooth without layer patterns
- Density 1.21 g/cm3
- Tensile Strength 52MPa
- Elongation at Break 14.4%
- Extruder Temp 190 – 230℃
- Bed Temp 45 – 60°C
- Printing Speed 40 – 100mm/s
eSUN
eSun Luminous-PLA
- eSun Luminous-PLA
- Stunning luminescent effect in low-light
- Enhancing aesthetics and fun
- Density 1.2g/cm3
- Durability 40%
- Tensile Strength 72MPa
- Elongation at Break 11.8%
- IZOD Impact Strength 5.4kJ/㎡
- Extruder Temp 210-230℃
- Bed Temp 45 – 60°C
eSUN
eSun ePLA-Lite
- eSun ePLA-Lite Filament
- A cost-effective choice
- Excellent printability
- Density 1.23 g/cm3
- Tensile Strength 61.34 MPa
- Elongation 29.92%
- Durability 40%
- Extruder Temperature 190 – 230℃
- Bed temperature 45 – 60°C
- Printing Speed 40 – 100mm/s
eSUN
eSun eABS Max
- eSun eABS Max
- High impact resistance
- High toughness
- Antiflaming
- Density 1.05 g/cm3
- Tensile Strength 45MPa
- Elongation at Break 30%
- Flexural Strength 58MPa
- Extruder Temperature 240 – 270℃
- Bed temperature 95 – 110°C
- Printing Speed 40 – 100mm/s
eSUN
eSUN ePETG+HS
- eSUN ePETG+HS Filament
- High Toughness & Waterproof
- Chemical Resistance
- Density 1.26 g/cm3
- Tensile Strength 29.2MPa
- Elongation at Break 4.2%
- Extruder Temp 220-260°C
- Bed Temp 75-90°C
- Printing Speed 40-300mm/s
ELEGOO
ELEGOO Saturn 3 Ultra 12K
- 10-inch 12K Mono LCD
- ACF Release Film
- Light Source COB+Reflective Light Source
- Print Speed Up to 150mm/h
- Linux OS with 4Gb RAM
- XY Resolution of 19×24μm
- Wi-Fi Transfer Speeds of 6-10Mbps
- Build Volume of 218.88×122.88×260 mm³
- 4.0-inch Capacitive Touch Screen Controller
ELEGOO
ELEGOO Mars 3 Ultra 9K
- 7-inch 9K mono LCD
- ACF Release Film
- Light Source COB light source + Fresnel collimating lens
- Print Speed Up to 150mm/h
- Linux OS with 4Gb RAM
- XY Resolution of 18μm
- Wi-Fi Transfer Speeds of 6-10Mbps
- Build Volume of 153.36x77.76x165 mm³
- 4.0-inch Capacitive Touch Screen Controller
eSUN
eSUN ePLA-Magic Dark Twinkling
- eSUN ePLA-Magic Dark Twinkling
- Density 1.21 g/cm3
- Tensile Strength 34.18MPa
- Elongation at Break 4.25%
- Flexural Modulus 3459 MPa
- Printing Temp 190- 220℃
- Bed Temp 45-60°C
- 40 - 300mm/s
ELEGOO
Elegoo Neptune 4 Pro
- Elegoo Neptune 4 PRO 3D Printer
- Build Volume 225*225*265mm
- Print Speed Up to 500 mm/s
- Hotend Max Temp 300 °C
- Build Plate Max Temp 110 °C
- Automatic Levelling over 121 Points
- 4.3" Removable Touch Screen Controller
- Klipper Frimware
- Dual-Drive-Gear Extruder
eSUN
eSUN ePLA-Chameleon
- eSUNePLA-Chameleon
- change colour depending on the light or viewing angle
- Extruder Temp 190- 230℃
- Build Plate Temp 45-60°C
- Density 1.21 g/cm3
- Printing Speed 40 - 300mm/s
- Tensile Strength 26.1 MPa
- Elongation at Break 3.9%
- Flexural Strength 115.6MPA
- IZOD Impact Strength 3kJ/m2
eSUN
eSUN ePLA-SS
- eSUN ePLA-SS
- Printing Speed 40-300mm/s
- Density 1.24 g/cm3
- Tensile Strength 20-30MPa
- Elongation at Break 5-10%
- Flexural Strength 101.2MPa
- Extruder Temp 210 - 230℃
- Build Platform Temperature 45-60°C
English
العربية
