Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Availability:
Not available
-
Categories:
3D Printer
-
Categories:
Resin
-
Brand:
BAMBU LAB
-
Brand:
PHROZEN
![]()
BAMBU LAB
Bambu Lab H2D AMS Combo 3D Printer
- Dual-nozzle system for multi-material & multi-color printing
- Maximum print speed up to 600mm/s
- Massive build volume: 350×320×325 mm³
- High-temperature all-metal hotend: up to 350°C
- 65°C actively heated chamber for warp-free printing
- Supports over 20 materials: PLA, ABS, PETG, TPU, PC, PA
- REAL High-Flow Hotend: up to 65mm³/s flow rate
- Intelligent DynaSense Extruder with closed-loop servo control
- Automatic multi-color and multi-filament printing
- Supports up to 16 filaments
- 15-point filament monitoring system for feeding, tip location, tension & flow
- AI and Smart Features
- AI-powered pre-flight checklist
- Built-in cameras: BirdsEye, Nozzle, Toolhead
- Auto bed leveling and Z-offset calibration
- Real-time error detection (clogs, tangles, under-extrusion)
- Power loss recovery & filament runout detection
- Compatible with optional 10W / 40W laser modules
- Compatible with digital cutting blade module
- Compatible with pen plotter tool for writing/drawing
- Quick-swap toolheads with automatic recognition
- Laser Power: 10W or 40W (455nm)
- Engraving area: up to 310×270 mm
- Engraves and cuts wood, acrylic, leather, rubber, and more
- Micro Lidar for 3D mesh generation and Z-height sensing
- Built-in air assist, flame detection, and safety systems
- Digital Cutting & Drawing
- Cutting area: 300×285 mm²
- Blade pressure: 50gf to 600gf
- Supports vinyl, paper, fabric, leather, etc.
PHROZEN
Phrozen Castable Resin W40 Orange
- Phrozen Castable Resin W40 Orange
- 40% wax content
- Low shrinkage, high precision
- No foul/strong odor
- Compatible with 405nm 3D Printers
- XY resolution：0.050 mm
BAMBU LAB
Bambu Lab H2S AMS Combo 3D Printer
- Large build volume 340×320×340 mm
- Multi-color printing with AMS 2 Pro
- Supports up to 24 colors & materials
- Optical calibration at 5μm accuracy
- All-metal nozzle with 350°C heat
- Heated chamber up to 65°C
- Automatic filament drying system
- 23 smart sensors & 3 AI cameras
- Print speed up to 1000 mm/s
- Servo motor with 67% more extrusion
- Optional 10W laser cutting module
- Active vibration compensation system
- Sturdy, integrated metal body design
- Ultra-quiet operation under 50 dB
PHROZEN
Phrozen Castable Resin W20 Green
- Phrozen Castable Resin W20 Green
- 20% wax content
- Low shrinkage, high precision
- No foul/strong odor
- Compatible with 405nm 3D Printers
- XY resolution：0.050 mm
PHROZEN
Phrozen Castable Jewelry 3D Printing Resin
- Phrozen Castable Jewelry 3D Printing Resin
- Surface Hardness: 76 Shore D
- Tensile Stress at Break: 25.1 MPa
- Elongation at Break, EAB: 20.63 %
- Notched Izod Impact：28.98 J/m
- Specifically designed for casting
- Low shrinkage, high precision
- No foul/strong odor
- Compatible with 405nm 3D Printers
- XY resolution：0.050 mm
PHROZEN
Phrozen RPG 3D Printing Resin
- Phrozen RPG 3D Printing Resin
- More durable and playable
- Flexible and elastic
- Print once, play more
- The look that best suits your character
- Stunning matte gray finish
PHROZEN
Phrozen Aqua Hyperfine 3D Printing Resin
- Phrozen Aqua Hyperfine 3D Printing Resin
- Phrozen RPG 3D Printing Resin
- More durable and playable
- Flexible and elastic
- Print once, play more
- The look that best suits your character
- Stunning matte gray finish
PHROZEN
Phrozen Aqua 8K 3D Printing Resin
- Phrozen Aqua 8K 3D Printing Resin
- Specifically formulated to showcase super-fine detail
- Easy to print and are easily post-processed
- Low Shrinkage & High Precision
- Low Viscosity & Low Odor
PHROZEN
Phrozen Aqua 4K 3D Printing Resin
- Phrozen Aqua 4K 3D Printing Resin
- Developed for low shrinkage and high precision
- Easy to print and are easily post-processed
- Formulated to print with the highest resolution
PHROZEN
Phrozen Aqua 3D Printing Resin
- Phrozen Aqua 3D Printing Resin
- Good printing performance
- Print even thin objects with ease
- Moderate viscosity and low odor
- Density: 1.05 - 1.25 g/cm3
- Viscosity: 250 - 400 cP
- Surface Hardness: 70 Shore D
- Tensile Strength at Break: 17.6 MPa
PHROZEN
Phrozen EL400 Elastomer 3D Printing Resin
- Phrozen EL400 Elastomer 3D Printing Resin
- Printing flexible and durable models
- Compatible With all Kind of Resin 3D Printers
- High Precision Printing
- Easy post Productions
- Fast Printing Speed
BAMBU LAB
Bambu Lab X1-Carbon Combo
- Bambu Lab X1 Carbon COMBO 3D printer
- Equipped with the AMS System
- Build Volume:256×256×256mm
- High quality printing with 7 μm Lidar Resolution
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
PHROZEN
Phrozen Speed Plus 3D Printing Resin
- Phrozen Speed Plus 3D Printing Resin
- Faster 3D Printing
- Short exposure time
- Suitable for large-format models
- Compatible with ACF & PFA Release Films
- High Details and accuracy
- Hardness 85–88D
- Tensile modulus 2414 MPa
- Viscosity 150–250 cP at 25 °C
- longation at break 5.7%
PHROZEN
Phrozen Speed 3D Printing Resin
- Phrozen Speed 3D Printing Resin
- Up to 8x faster 3D Printing
- Print Huge Models Within 6 Hours
- Compatible With Various LCD 3D Printers
BAMBU LAB
Bambu Lab A1 mini
- Bambu Lab A1 mini 3D printer
- Build Volume:180*180*180 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 80℃
- built-in Monitoring camera
BAMBU LAB
Bambu Lab P1P
- Bambu Lab P1P 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab P1S Combo
- Bambu Lab P1S 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- Enclosed-body for high-temperature filament printing
- Up to 16-color printing with AMS
- built-in chamber camera
BAMBU LAB
Bambu Lab P1S
- Bambu Lab P1S 3D printer
- Build Volume:256×256×256mm
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
PHROZEN
Phrozen Sonic Mighty Revo
- 10.1-inch 14K mono LCD
- Build Volume of 22.3x12.6x23.5cm
- ACF Release Film
- Print Speed Up to 450Layers/h
- XY Resolution of 16.8x24µm
- High Speed WiFi Connection
- 5.0-inch Capacitive Touch Screen Controller
- 8GB Internal Storage
BAMBU LAB
Bambu Lab X1E
- Bambu Lab X1E 3D printer
- Build Volume:256×256×256mm
- High quality printing with 7 μm Lidar Resolution
- Max Speed : 500mm/s
- Max Hot End Temperature : 320 ℃
- Chamber Control Temperature 60℃
- Max Build Plate Temp: 110℃
- built-in chamber camera
BAMBU LAB
Bambu Lab A1 mini Combo
- Bambu Lab A1 mini Combo 3D printer
- Equipped with AMS system
- Build Volume:180*180*180 mm³
- Max Speed : 500mm/s
- Max Hot End Temperature : 300 ℃
- Max Build Plate Temp: 80℃
- built-in Monitoring camera
PHROZEN
Phrozen Sonic Mega 8K S
- Phrozen Sonic Mega 8K S
- 15" 8K Mono LCD
- Print Volume: 33x18.5x30cm
- Light Source : 405nm ParaLED Matrix 2.0
- Control Panel 3.5" in Large Touch Panel
- XY Resolution 43 µm
- Layer Thickness 0.01-0.30 mm
- Printing Speed 600 layers/hr
- Release Film ACF Film
- Seamless Integration With Pump & Fill
English
العربية
