Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Availability:
Not available
-
Categories:
3D Printer
-
Categories:
Filamets
![]()
BAMBU LAB
Bambu Lab H2D AMS Combo 3D Printer
- Dual-nozzle system for multi-material & multi-color printing
- Maximum print speed up to 600mm/s
- Massive build volume: 350×320×325 mm³
- High-temperature all-metal hotend: up to 350°C
- 65°C actively heated chamber for warp-free printing
- Supports over 20 materials: PLA, ABS, PETG, TPU, PC, PA
- REAL High-Flow Hotend: up to 65mm³/s flow rate
- Intelligent DynaSense Extruder with closed-loop servo control
- Automatic multi-color and multi-filament printing
- Supports up to 16 filaments
- 15-point filament monitoring system for feeding, tip location, tension & flow
- AI and Smart Features
- AI-powered pre-flight checklist
- Built-in cameras: BirdsEye, Nozzle, Toolhead
- Auto bed leveling and Z-offset calibration
- Real-time error detection (clogs, tangles, under-extrusion)
- Power loss recovery & filament runout detection
- Compatible with optional 10W / 40W laser modules
- Compatible with digital cutting blade module
- Compatible with pen plotter tool for writing/drawing
- Quick-swap toolheads with automatic recognition
- Laser Power: 10W or 40W (455nm)
- Engraving area: up to 310×270 mm
- Engraves and cuts wood, acrylic, leather, rubber, and more
- Micro Lidar for 3D mesh generation and Z-height sensing
- Built-in air assist, flame detection, and safety systems
- Digital Cutting & Drawing
- Cutting area: 300×285 mm²
- Blade pressure: 50gf to 600gf
- Supports vinyl, paper, fabric, leather, etc.
BAMBU LAB
Bambu Lab H2S AMS Combo 3D Printer
- Large build volume 340×320×340 mm
- Multi-color printing with AMS 2 Pro
- Supports up to 24 colors & materials
- Optical calibration at 5μm accuracy
- All-metal nozzle with 350°C heat
- Heated chamber up to 65°C
- Automatic filament drying system
- 23 smart sensors & 3 AI cameras
- Print speed up to 1000 mm/s
- Servo motor with 67% more extrusion
- Optional 10W laser cutting module
- Active vibration compensation system
- Sturdy, integrated metal body design
- Ultra-quiet operation under 50 dB
eSUN
eSun PLA+
- eSun PLA+ 1.75mm Filament
- Enhanced durability and resilience
- Versatile printer compatibility
- Superb layer bonding for optimal prints
- Recommended Printing Temperature: 210 - 230 °C
- Recommended Bed Temperature: 45 - 60°C
- Density 1.23 g/cm3
- Tensile Strength 60MPa
- Elongation at Break 60%
CREALITY
Creality Hyper Series PLA
- Creality Hyper Series PLA 1.75mm Filament
- 10x Faster Printing
- Keep Precision While Keeping Ultra-high Speed
- Strengthen Models with Enhanced Toughness
- Recommended Printing Temperature: 190 - 230 °C
- Recommended Bed Temperature: 25 - 60°C
eSUN
eSun ePLA-Silk Magic
- eSun ePLA-Silk Magic
- Different Colors at Different Angles
- Extruder Temp 210-230°C
- Bed Temp 45-60°C
- Density 1.256cm3
- Tensil Strength 57.64
- Durability 40%
- Printability 90%
CREALITY
Creality&BASF Ultra Series PLA
- Creality&BASF Ultra Series PLA 1.75mm Filament
- Faster cooling and shaping
- Higher accuracy
- Faster Priting Speed 600mm/s
- Recommended Printing Temperature: 200-230℃
- Recommended Bed Temperature: 25 - 60°C
ANYCUBIC
Anycubic PLA Basic
- Anycubic PLA Basic 3D Printer Filament
- Neat Spool and No Tangle
- High Precision and Accuracy
- Eco-Friendly, Biodegradable
ANYCUBIC
Anycubic PLA High Speed
- Anycubic PLA High Speed
- Priting Up to 500mm/s
- Enhanced Fluidity and Better Cooling Effect
ANYCUBIC
Anycubic PLA Silk
- Anycubic PLA Silk Filament
- Silk Feel and Lustre
- Eco-Friendly, Biodegradable
- Widely Applicable to Printers
ANYCUBIC
Anycubic PLA+
- Anycubic PLA+ 3D Pinter Filament
- High Toughness
- High precision and minimal shrinkage
- Eco-Friendly
- Compatible with all of FDM 3D Printer
eSUN
eSUN PETG
- eSun PETG Filament
- Resistant to Variety of Chemicals
- High Precision Printing
- Density 1.27
- Heat Distortion Temp 64
- Tensin Strength 52.2 MPa
- Elogation at Break 83%
- Extruder Temp 230-250
- Bed Temp 75~950
ANYCUBIC
Anycubic Kobra S1 Combo
- Anycubic Kobra S1 Combo
- Print Volume 250*250*250mm
- Printing Speed up to 600mm/s
- 8 Color 3D Printing
- Ultra-Quiet Printing 33dB
- Compatible with PLA, PETG, TPU，ABS, ASA
- Nozzle temperature 320°C
- Hotbed temperature 120℃
eSUN
eSUN ABS
- eSUN ABS Filament
- Unbelievable Toughness
- Impact resistance
- Heat resistance
- Density(g/cm3) 1.04
- Heat Distortion 78℃ 0.45MPa
- Melt Flow Index(g/10min) 12(220℃/10kg）
- Tensile Strength 43MPa
- Elongation at Break 22%
- Extruder Temp 230 – 270℃
- Bed Temp 95 – 110°C
ELEGOO
ELEGOO Saturn 4 Ultra 16K
- Elegoo Saturn 4 Ultra 16K
- Build Volume 211.68*118.37*220
- 10Inch Monochrome LCD 11520*5120
- XY Resolution 19*24um
- Real-Time Monitoring Ai HD Camera
- Layer Thickness 0.01-0.2mm
- Fully Automatic Leveling
- Tilt Release Technology for faster Printing
- Printing Speed up to 150mm/h
- enhance printing by Heating tank
- Wi-Fi File Transfer & Cluster Printing
eSUN
eSun eTPU-95A
- eSun eTPU-95A Filament
- Flexible and soft
- Sturdy and durable
- Compatible with all of 3D Printers
- Extruder Temp 220-250℃
- Bed Temp 40-60℃
- Printing Speed 50mm/s
- Duribility 90%
ANYCUBIC
Anycubic Photon Mono M7 Max
- Anycubic Photon Mono M7 Max
- Resin Auto-Fill Unit
- Build Volume 298x164x300mm
- 13.6 inch monochrome 7K screen
- X/Y Axis Resolution 46*46μm
- LighTurbo 3.0 High-Precision Light Source System
- Maximum print speed op to 86mm/h
- Dynamic temperature control resin vat
- Intelligence Assisted Printing System
- Light Source COB light source+ Fresnel lens
- Light Intensity 4500±10%μW/cm²
eSUN
eSun eTPU-HS
- eSun eTPU-HS Filament
- Flexible and soft
- High elasticity
- High toughness
- Nozzle Temp 220~250°C
- Bed Temp 45~60°C
- Durability 90%
- Printing Speed 50 – 200mm/s
- Build Surface : Masking paper, PVP solid glue, PEI
eSUN
eSUN ePLA-HS
- eSun ePLA-HS Filament
- Suitable for high-speed printing
- Smooth flow without blocking
- Quick Cooling and forming
- Density 1.24 g/cm3
- Extruder Temp 210-230
- Bed Temp 45-60
- Printing Speed 350mm/s
eSUN
eSUN ABS+
- eSUN ABS+ Filament
- Density 1.06g/cm³
- Heat Distortion 73
- Tensil Strength 40%
- Extruder Temp 230~270
- Bed Temp 95~110
CREALITY
Creality K1C
- Creality K1C 3D Printer
- 600mm/s Printing Speed
- Versatile Ai LiDAR
- Priting Dimention : 220*220*250mm
- Maximum Hotend Temp 300℃
- Maximum HotBed Temp 100℃
- Equipted to Ai Camera
- equipped to Air Purifier
CREALITY
Creality CR-PLA
- Creality CR-PLA Filament
- Density 1.25g/cm³
- Tensile strength 49MPa
- Bending strenght 78MPa
- Extruder Temp 195-230 ℃
- Bed Temp 25 -60℃
- Printing Speed 40-80mm/s
- Print Surface Carborundum glass platform, PEI
eSUN
eSun ePLA-Matte
- eSun ePLA-Matte Filament
- Matte surface effect
- High-speed printing
- Easy to peel off the support
- Excellent printability
- Prop Bed Temp 45~60
- Prop Extruder Temp 190~230
- Density 1.329 g/cm³
- Elongation at break 50%
ANYCUBIC
Anycubic PETG Filament
- Anycubic PETG Filament
- Strong and Durable
- Clear and Vibrant
- Prop Bed Temp 75~90℃
- Prop Nozzle Temp 230~250℃
English
العربية
