Left Banner
-
Free PLA Filament
For First Orders
Active filters
-
Categories:
Filamets
-
Brand:
BAMBU LAB
-
Brand:
eSUN
-
Brand:
Polymaker
Polymaker
Polymaker PolyLite PLA
- Polymaker PolyLite PLA Filament
- Density 1.17 g/cm3
- Elongation at break 1.90 ± 0.21 %
- Charpy impact strength 2.68 ± 0.16 kJ/m2
- Tensile strength 46.6 ± 0.9 MPa
- Nozzle temperature 190 – 230℃
- Build plate temperature 25 - 60˚C
- Printing speed 40-60mm/s
Polymaker
Polymaker PolyLite Dual Silk PLA
- PolyLite Dual Silk PLA Filament
- Density 1.17 g/cm3
- Tensile strength 46.6 ± 0.9 MPa
- Elongation at break 1.90 ± 0.21 %
- Charpy impact strength 2.68 ± 0.16 kJ/m2
- Nozzle temperature 190 – 230℃
- Build plate temperature 25 - 60˚C
- printing speed 40-60mm/s
eSUN
eSun ePLA-Silk
- eSun ePLA-Silk Filament
- Shinny and Silk luster texture
- Super smooth without layer patterns
- Density 1.21 g/cm3
- Tensile Strength 52MPa
- Elongation at Break 14.4%
- Extruder Temp 190 – 230℃
- Bed Temp 45 – 60°C
- Printing Speed 40 – 100mm/s
eSUN
eSun Luminous-PLA
- eSun Luminous-PLA
- Stunning luminescent effect in low-light
- Enhancing aesthetics and fun
- Density 1.2g/cm3
- Durability 40%
- Tensile Strength 72MPa
- Elongation at Break 11.8%
- IZOD Impact Strength 5.4kJ/㎡
- Extruder Temp 210-230℃
- Bed Temp 45 – 60°C
eSUN
eSun ePLA-Lite
- eSun ePLA-Lite Filament
- A cost-effective choice
- Excellent printability
- Density 1.23 g/cm3
- Tensile Strength 61.34 MPa
- Elongation 29.92%
- Durability 40%
- Extruder Temperature 190 – 230℃
- Bed temperature 45 – 60°C
- Printing Speed 40 – 100mm/s
eSUN
eSun eABS Max
- eSun eABS Max
- High impact resistance
- High toughness
- Antiflaming
- Density 1.05 g/cm3
- Tensile Strength 45MPa
- Elongation at Break 30%
- Flexural Strength 58MPa
- Extruder Temperature 240 – 270℃
- Bed temperature 95 – 110°C
- Printing Speed 40 – 100mm/s
eSUN
eSUN ePETG+HS
- eSUN ePETG+HS Filament
- High Toughness & Waterproof
- Chemical Resistance
- Density 1.26 g/cm3
- Tensile Strength 29.2MPa
- Elongation at Break 4.2%
- Extruder Temp 220-260°C
- Bed Temp 75-90°C
- Printing Speed 40-300mm/s
eSUN
eSUN ePLA-Magic Dark Twinkling
- eSUN ePLA-Magic Dark Twinkling
- Density 1.21 g/cm3
- Tensile Strength 34.18MPa
- Elongation at Break 4.25%
- Flexural Modulus 3459 MPa
- Printing Temp 190- 220℃
- Bed Temp 45-60°C
- 40 - 300mm/s
eSUN
eSUN ePLA-Chameleon
- eSUNePLA-Chameleon
- change colour depending on the light or viewing angle
- Extruder Temp 190- 230℃
- Build Plate Temp 45-60°C
- Density 1.21 g/cm3
- Printing Speed 40 - 300mm/s
- Tensile Strength 26.1 MPa
- Elongation at Break 3.9%
- Flexural Strength 115.6MPA
- IZOD Impact Strength 3kJ/m2
eSUN
eSUN ePLA-SS
- eSUN ePLA-SS
- Printing Speed 40-300mm/s
- Density 1.24 g/cm3
- Tensile Strength 20-30MPa
- Elongation at Break 5-10%
- Flexural Strength 101.2MPa
- Extruder Temp 210 - 230℃
- Build Platform Temperature 45-60°C
English
العربية
