طابعات ثلاثية

• Dual-nozzle system for multi-material & multi-color printing
• Maximum print speed up to 600mm/s
• Massive build volume: 350×320×325 mm³
• High-temperature all-metal hotend: up to 350°C
• 65°C actively heated chamber for warp-free printing
• Supports over 20 materials: PLA, ABS, PETG, TPU, PC, PA
• REAL High-Flow Hotend: up to 65mm³/s flow rate
• Intelligent DynaSense Extruder with closed-loop servo control
• Automatic multi-color and multi-filament printing
• Supports up to 16 filaments
• 15-point filament monitoring system for feeding, tip location, tension & flow
• AI and Smart Features
• AI-powered pre-flight checklist
• Built-in cameras: BirdsEye, Nozzle, Toolhead
• Auto bed leveling and Z-offset calibration
• Real-time error detection (clogs, tangles, under-extrusion)
• Power loss recovery & filament runout detection
• Compatible with optional 10W / 40W laser modules
• Compatible with digital cutting blade module
• Compatible with pen plotter tool for writing/drawing
• Quick-swap toolheads with automatic recognition
• Laser Power: 10W or 40W (455nm)
• Engraving area: up to 310×270 mm
• Engraves and cuts wood, acrylic, leather, rubber, and more
• Micro Lidar for 3D mesh generation and Z-height sensing
• Built-in air assist, flame detection, and safety systems
• Digital Cutting & Drawing
• Cutting area: 300×285 mm²
• Blade pressure: 50gf to 600gf
• Supports vinyl, paper, fabric, leather, etc.

• حجم طباعة كبير 340×320×340 مم
• طباعة متعددة الألوان مع AMS 2 Pro
• دعم حتى 24 لونًا ومواد متعددة
• معايرة بصرية بدقة 5 ميكرومتر
• فوهة معدنية تتحمل حرارة 350°
• حجرة طباعة مُسخنة حتى 65°
• نظام تجفيف أوتوماتيكي للخيوط
• 23 مستشعرًا ذكيًا و 3 كاميرات AI
• سرعة طباعة تصل إلى 1000 مم/ث
• محرك سيرفو بقوة بثق أعلى 67٪
• دعم وحدة ليزر اختيارية بقوة 10 واط
• نظام تعويض الاهتزازات النشط
• هيكل معدني قوي ومتين للغاية
• تشغيل هادئ بمستوى ضوضاء أقل من 50 ديسيبل

• Bambu Lab A1 Combo 3D printer
• Multi-Color Printing With AMS
• Build Volume:256*256*256 mm³
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 100℃
• built-in Monitoring camera

• ELEGOO Centauri Carbon 3D Printer
• Build Volume 256×256×256 mm
• Fully enclosed chamber
• Max Printing Speed 500 mm/s
• Support Auto-Leveling
• Layer Thickness 0.1-0.4 mm
• 4.3-inch Capacitive Touch Screen Controller
• Max Hot End Temperature 320 °C
• Max Heated Bed Temperature 110 °C

• ELEGOO OrangeStorm Giga
• Build Volume 800x800x1000mm
• Printing Speed 300mm/s
• Multi-Nozzle Printing
• Portable 7-inch Controller
• Multi link Printing Plate
• Max Bed Temp 90°C
• Max Extruder Temp 300℃

• Anycubic Kobra S1 Combo
• Print Volume 250*250*250mm
• Printing Speed up to 600mm/s
• 8 Color 3D Printing
• Ultra-Quiet Printing 33dB
• Compatible with PLA, PETG, TPU，ABS, ASA
• Nozzle temperature 320°C
• Hotbed temperature 120℃ 

• Bambu Lab X1 Carbon COMBO 3D printer
• Equipped with the AMS System
• Build Volume:256×256×256mm
• High quality printing with 7 μm Lidar Resolution
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 110℃
• built-in chamber camera

• Anycubic Kobra 3 Combo
• With Multi Filament 3D Priting Anycubic Ace Pro
• Max Print Volume 250*250*260mm
• Max Priting Speed 600mm/s
• Max Nozzle Temp 300℃
• Max Bed Temp 100℃

• Bambu Lab A1 mini 3D printer
• Build Volume:180*180*180 mm³
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 80℃
• built-in Monitoring camera

Regular fit, round neckline, short sleeves. Made of extra long staple pima cotton.

• Bambu Lab P1S 3D printer
• Build Volume:256×256×256mm
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 110℃
• Enclosed-body for high-temperature filament printing
• Up to 16-color printing with AMS
• built-in chamber camera

• Bambu Lab P1S 3D printer
• Build Volume:256×256×256mm
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 110℃
• built-in chamber camera

• Elegoo Neptune 4 PRO 3D Printer
• Build Volume 225*225*265mm
• Print Speed Up to 500 mm/s
• Hotend Max Temp 300 °C
• Build Plate Max Temp 110 °C
• Automatic Levelling over 121 Points
• 4.3" Removable Touch Screen Controller
• Klipper Frimware
• Dual-Drive-Gear Extruder

• Anycubic Kobra 2 Max 3D Printer
• Build Volume 420*420*500mm
• Print Speed Up to 500 mm/s
• Hotend Max Temp 260 °C
• Build Plate Max Temp 90 °C
• Anycubic LeviQ 2.0 Automatic Leveling 49 Points
• 4.3" Removable Touch Screen Controller
• PEl Magnetic Spring Steel Printing bed

• Bambu Lab X1 Carbon 3D printer
• Build Volume:256×256×256mm
• High quality printing with 7 μm Lidar Resolution
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 110℃
• built-in chamber camera

• Bambu Lab X1E 3D printer
• Build Volume:256×256×256mm
• High quality printing with 7 μm Lidar Resolution
• Max Speed : 500mm/s
• Max Hot End Temperature : 320 ℃
• Chamber Control Temperature 60℃
• Max Build Plate Temp: 110℃
• built-in chamber camera

• Bambu Lab A1 mini Combo 3D printer
• Equipped with AMS system
• Build Volume:180*180*180 mm³
• Max Speed : 500mm/s
• Max Hot End Temperature : 300 ℃
• Max Build Plate Temp: 80℃
• built-in Monitoring camera

• Elegoo Neptune 4 Max 3D Printer
• Build Volume 420x420x480mm³
• Print Speed Up to 500 mm/s
• Hotend Max Temp 300 °C
• Build Plate Max Temp 85 °C
• Automatic Levelling over 121 Points
• 4.3" Removable Touch Screen Controller
• Klipper Frimware
• Dual-Drive-Gear Extruder

• Anycubic Kobra 2 Pro 3D printer
• Maximum Print 250*220*220mm
• Max Speed 500mm/s
• Automatic Leveling LeviQ 2.0
• Max Hotend Temp 260°C
• Max Bed Temp 110°C
• Super Quick 7000rpm/min Cooling fan
• 4.3" LCD Touch-Control Screen

• Anycubic Kobra 2 Plus 3D printer
• Maximum Print 400x320x320mm
• Max Speed 500mm/s
• Automatic Leveling LeviQ 2.0
• Max Hotend Temp 260°C
• Max Bed Temp 90°C
• Super Quick 7000rpm/min Cooling fan
• 4.3" LCD Touch-Control Screen

• Anycubic Kobra 2 Neo 3D Printer
• Printing Volume 250*220*220mm
• Max Printing Speed 250mm/s
• Automatic Bed Leveling LeviQ 2.0 25 Points
• Max Nozzle Temp 260°C 
• Max Bed Temp 110°C
• 2.4" LCD Knob-Control

• Elegoo Neptune 4 Plus 3D Printer
• Print Volume 320x320x385mm³
• Max Printing Speed: 500 mm/s
• Max Nozzle Temp 300 °C
• Max Bed Temp 100 °C
• Auto Bed Leveling
• High Speed Klipper Mainboard

• Elegoo Neptune 4 3D Printer
• Build Volume 225x225x265mm³
• Max Printing Speed: 500 mm/s
• Max Nozzle Temp 300 °C
• Max Bed Temp 110 °C
• 121 Points Auto Bed Leveling
• ARM 64-bit high-performance mainboard
• Powerful cooling system

• Anycubic Kobra 3
• Max Print Volume 250*250*260mm
• Max Priting Speed 600mm/s
• Max Nozzle Temp 300℃
• Max Bed Temp 100℃
• 4.3-inch Touch Controller
• Hardened Steel Extruder Gear
• Automatic hot bed leveling
• Quick Swap Nozzle